2\b27
N A V I G A T I O NReal\btime navigation system uses GPS and a map database to show your current
location and help guide you to a desired destination.
Entering a Destination Using Voice Commands
Find a nearby point of interest, such as a gas station, movie theater, restaurant, etc.
Press and release the Talk button before you give a command.
\f. From the map screen, say“Find
nearest ATM.”
2. A list of the nearest ATMs in your area is displayed by
shortest distance to destination. 3.
Say the number next to the
destination you want to select.
4. Say “Set as destination” to set
the route.
Calculated route
Time to go
Distance to go Next guidance
point
Current vehicle
location
Set a destination using a street address. For other destination options, see your
Navigation Manual.
Press and release the Talk button before you give a command.
\f. Say “Address.”
2. Say “Street,” then say the street
name on the next screen. Do
not include the direction (N, S, E,
W) or type (St., Ave., Blvd., etc.).
3. A list of street names appears. Say the number next to the
street you want.
NOTE\f It is recommended that you enter your destination before
driving or when the vehicle is stopped. 4.
Say the entire street address
number. For example, “1 2 3 \f.”If
necessary, say“OK” to proceed.
5. If the street address is in more than one city, a list of city names
appears. Saythe number next to
the city you want to select.
6. Say “Set as destination” to set the
route.
Using the “Find Nearest” Command
Map Screen Legend
13 Accord4D TRG_EXL NAVI\fATG_NEW STYLE 7/13/2012 3\f44 PM Page 15
3233
Use the interface dial to make and enter selections.
\f. Press PHONE.
Using Speed Dial
Using the Menu
3.Select the entry to call.
2. From the Speed Dial tab,
scroll the list of speed dial
entries.
Receiving a Call
When you receive an incoming call, you hear a notification and see the following
pop\bup message:
Pressthe Hang\bUp button to
end or decline the call.
Press the Pick\bUp button to
accept the call.
Use the interface dial to make and enter selections.
Using the Phonebook
When your phone is paired, its entire phonebook is automatically imported to
the system. This feature is inoperable when the vehicle is moving.
3. Select Phonebook.
4. Scroll through the list to find the
name and number you want to
call, and selectit to call.
\f.
Press PHONE.
2. Press MENU.
Store 20 speed dial entries for quick calling.
When a speed dial entry is stored with a voice tag, you can make a call using
voice commands at any time. See your Owner’s Manual for more information.
Using Voice Commands
Say “Call” and the stored voice tag name. The system begins to dial.
You can also say the name and type of any phone number stored in
your phonebook. For example, say“Call by name” followed by“John
Smith mobile.”
Note\f Phone synchronization must be on for the “Call by name”
feature to work.
Press and release the TALK button to say a command.
13 Accord4D TRG_EXL NAVI\fATG_NEW STYLE 7/13/2012 3\f45 PM Page 18
