2013 DODGE CHALLENGER SRT parking brake

[x] Cancel search: parking brake

Page 220 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual NOTE:This light shows only that the parking brake is
applied. It does not show the degree of brake application.
21. Vehicle Security Light — If Equipped
This light will flash at a fast rate for appr

Page 232 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual •The time will continue to display until the SELECT
button is pressed.
• Pressing the SELECT button will clear the current run
time and display the vehicle’s best 0-60 mph
(0-100 km/h) time.
•

Page 290 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual ▫Steering Wheel Mounted Paddle Shifters Or
Console Mounted Shifter ................315
 SPORT MODE ........................ .318
 LAUNCH MODE – IF EQUIPPED ...........319
 DRIVING ON SLIPPERY S

Page 293 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual STARTING PROCEDURES
Before starting your vehicle, adjust your seat, adjust the
inside and outside mirrors, fasten your seat belt, and if
present, instruct all other occupants to buckle their seat
belt

Page 298 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual NOTE:If the ignition switch is left in the ACC or RUN
(engine not running) position and the transmission is in
PARK, the system will automatically time out after 30
minutes of inactivity and the ignit

Page 302 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual CAUTION!
To prevent damage to the starter, wait 10 to 15
seconds before trying again.
After Starting
The idle speed is controlled automatically and it will
decrease as the engine warms up.
ENGINE BLOC

Page 307 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual WARNING!
•Unintended movement of a vehicle could injure
those in or near the vehicle. As with all vehicles,
you should never exit a vehicle while the engine is
running. Before exiting a vehicle, alw

Page 310 of 520

DODGE CHALLENGER SRT 2013 3.G Owners Manual Gear Ranges
DO NOT race the engine when shifting from PARK or
NEUTRAL into another gear range.
NOTE:
•After selecting any gear range, wait a moment to allow
the selected gear to engage before accele