Page 174 of 420
172
Driving
If the cruise control is on, you can then modify
the initial speed in one of the following ways:
- using buttons 2
or 3
: )
by successive shor t presses, to modify
the speed by + or - 1 mph (km/h), )
by a long press, to modify the speed insteps of + or - 5 mph (km/h),
)Turn wheel 1to the "CRUISE"position: thecruise control mode is selected but is not
switched on (Pause). )Press button 2 or 3
: your vehicle's current
speed becomes the cruise speed (selected
on the fly).
The cruise control is activated (ON).
Modifi cation of the initial speed
setting
- pressing button 5: )the six memorised speeds are displayed
in the touch screen tablet,
)choose a value: it is displayed in the
instrument panel.
Th
e selection screen closes after a fewmoments.
The modification is then accepted.
Pause
Once switched on, you can pause the cruisecontrol at any time by pressing button 4
:
the screen confirms the pause.
Page 175 of 420
173
4
Driving
Flashing of the dashes indicates a fault with thecruise control.
Have it checked by a CITROËN dealer or aqualified workshop.
Operating fault
Exceeding the programmed
speed
If the programmed speed is exceeded, the
displayed speed flashes.
Once the vehicle returns to the programmedspeed, the display becomes steady again.
Switching off
)Turn wheel 1
to the "0"position.
The display of information related to the cruise control disappears.
When the cruise control is switched on,be careful if you maintain the pressure on one of the programmed speedchanging buttons: this may result in avery rapid change in the speed of your vehicle.
Do not use the cruise control on slippery roads or in heavy traffic. On a steep descent, the cruise control will not be able to prevent the vehicle from exceeding the programmed speed. On steep climbs or when towing, the programmed speed may not be reachedor maintained.
The use of mats not approved byCITROËN may inter fere with the
operation of the cruise control.
To avoid any risk of jamming of the pedals:
- ensure that the mat is positioned correctly,
- never fit one mat on top of another.
Page 178 of 420
176
Driving
The controls for this system are grouped
together on the steering wheel. 1. Cruise control mode selection wheel. 2.
Button for reducing the cruise value settingor for setting the cruise value on the fly.3.Button for increasing the cruise value
setting or for setting the cruise value on the
fly.4. Button for pausing / resuming the cruise control.5.
Button for displaying the list of memorised
speeds and for adjusting the inter-vehicle
time.
For more information on the list of memorised
speeds, refer to "Memorising speeds".
Steering mounted controls
Switching on
)
Turn the wheel 1
to the "CRUISE" position: cruise control mode is selected, but notstarted (Pause). )
Press one of the buttons 2or 3: the currentspeed of your vehicle becomes the cruisespeed setting (set on the fly).
The cruise control is activated (ON).
The inter-vehicle time is set at 2 seconds.
Operation
Modifi cation of the cruise controlspeed and/or the inter-vehicletime p
Button 5 (MEM)
Press button 5, the six memorised speeds and
the inter-vehicle time setting are displayed in
the touch screen tablet. )Choose a speed setting: it is displayed in
the instrument panel, )press or the " +" or "- " button to choose a new inter-vehicle time setting between
2.5 seconds and 1 second.
The selection screen closes after a fewmoments. The modifications are then accepted.
Modifi cation of the cruise control
speed only
Buttons 2 and 3
)
By successive shor t presses, to modify by steps of + or - 1 mph (km/h), )
by a maintained press, to modify in steps
of + or - 5 mph (km/h).
As a precaution, it is recommended that
you
select a speed setting close to the current
speed of your vehicle.
If the active cruise control has not beenswitched on, pressing this button hasno effect.
Page 194 of 420
192
Driving
360 Vision
This system provides a view in the instrument panel of the near surroundings of your vehicle,
using cameras mounted at the front and rear of
your vehicle and under the door mirrors.
Dependin
g on the angle of view chosen (front
view, rear view or 360° panoramic view),360 Vision provides special visual assistance
in particular driving conditions such as when entering a blind crossing or monoeuvring in
areas of reduced visibility.Once activated, this function operates up to9 mph (15 km/h). Above 18 mph (30 km/h), thefunction is deactivated automatically.
This system is a visual aid which in nocircumstances can replace the vigilance and responsibility of the driver. The images provided by the cameras may be deformed by the relief. Thepresence of areas in shade, in sunny conditions, or of low ambient light maydarken the image and reduce contrast.
Forward vision
The camera located in the front bumper isactivated and views of the areas located at frontleft and front right appear simultaneously in the
instrument panel.
Rear vision
The camera located in the tailgate is activated
and the view of the area behind your vehicle is
displayed in the instrument panel and behaveslike a reversing camera, whatever the position
of the gear selector lever.
The blue lines represent the width of your
vehicle (excluding mirrors): they move
according to the position of the steering wheel.
The red line represents a distance of 30 cm
from the rear bumper, and the two
green
lines, 1 m and 2 m from the rear bumper,
respectively.
Rear vision is displayed automaticallywhen engaging reverse, regardless of the state of the system.
Page 196 of 420
194
Driving
Park Assist
This system provides active assistance with parking, detecting a parking space then controlling the steering to park in the space. It controls the steering while the driver manages the accelerator, brakes, gears andclutch (manual gearbox). During phases of entry into and exit from a parking space, the system provides visual and audible information
to the driver in order to make the manoeuvres safe. It may be necessary to move for wards and backwards more than once.
During a manoeuvre the steering wheelturns quickly: do not hold the steeringwheel, do not place your hand between
the spokes of the steering wheel and take care with loose and bulky clothing, scarves, handbags... There is a risk of injury.
When Park Assist is activated, itprevents a change to STOP mode of Stop & Start. In STOP mode, activation of Park Assist restarts the engine.
The Park Assist system cannot in anycircumstances replace the care and responsibility of the driver.
The driver must remain in control of their vehicle ensuring that thespace remains clear throughout themanoeuvre. In some circumstances, the sensors may not detect small obstacles located in their blind spots.
The driver can take control at any time bygripping the steering wheel.
The Park Assist s
ystem provides assistance for
the following manoeuvres:
- entr
y into a parallel parking space
- exitin
g from a parallel parking space
- ba
y parking
The Park Assist system takes control of the power steering for a maximumof 4 manoeuvre cycles. The functionis deactivated after these 4 cycles.If you think that your vehicle is notpositioned correctly, you should then take control of the steering to carry outthe manoeuvre.
The Park Assist system cannot workwith the engine off.
Page 197 of 420
195
4
Driving
The sequence of manoeuvres and the driving instructions are displayed in the instrument panel.
You should always check thesurroundings of your vehicle beforestarting a manoeuvre.
The assistance isdeactivated: the display of this symbol indicates that the steering manoeuvres are no longer controlled by the system: you must takecontrol of the steering.
The assistance isactivated: the display of this symbol and a speed limit indicate that the steering manoeuvres are controlledby the system: do not touch the steering wheel.
The park sensors function is notavailable during parking spacemeasurement. It intervenes later whenmanoeuvring to warn you that your vehicle is approaching an obstacle: theaudible signal becomes continuouswhen the obstacle is less than thir ty centimetres away.
If you have deactivated the parking sensors, they are automatically reactivated during assisted parkingmanoeuvres.
Activation of Park Assist inhibits the blind spot monitoring function.
Page 198 of 420
196
Driving
Operation
Assistance with parallel parking manoeuvres
) Press this control at the steering
wheel,
) Select " Park Assist" in the"Driving assistance" menu of the touch screen tablet to activate the function.
To enter a parking space, the systemdoes not identify spaces that are clearlysmaller or larger than the vehicle.
or
This indicator lamp comes on in the
instrument panel to con
firm activation of the function.
)Limit the speed of the vehicle toa maximum of 12 mph (20 km/h)and select " Enter parking slot"in the touch screen tablet.
)Operate the direction indicator on theparking side chosen to activate themeasurement function. You should drive at a distance of between 0.5 m and 1.5 m from the row of parked vehicles.
)Drive slowly following the instructions until
the system finds a free space.
)When you have identified a parking space,
Page 199 of 420
197
4
Driving
)Move for wards slowly until a message is
displayed, accompanied by an audiblesignal, asking you to engage reverse gear.
)Select reverse, release the steering wheeland star t moving without exceeding 5 mph (8 km/h).
)
The assisted parking manoeuvre is inprogress.
Without exceeding 5 mph (8 km/h), move
for wards and backwards, aided by the
warnings from the "Parking sensors"system, until the indication of the end of the manoeuvre.
)
At the end of the manoeuvre, the operating
indicator lamp goes out in the instrument panel, accompanied by a message and an
audible signal.
The assistance is deactivated: you can
take over control.
