2013 Citroen C4 PICASSO wheel

46
Monitoring
Warning / indicator lampStateCauseAction / Observations
Deactivation of the automatic functions of the electric parkingbrake
fixed. The "automatic application" (onswitching off the engine) and
"automatic release" functions aredeactivated or faulty.
In the event of a fault, illumination of
this warning lamp is accompanied bya message.To reactivate the automatic
functions, refer to the"Electric parking brake" section.
Contact a CITROËN dealer or a qualified workshop if
automatic application / release is not possible.
The parking brake can be released manually.
For more information on the electric parking brake,
refer to the corresponding section.
Electric parking brakeflashing.When driving: the electric parking
brake is not fully released.Fully release the parking brake by a quick press on thecontrol lever. If the warning persist, stop as soon as it
is safe to do so.
Contact a CITROËN dealer or a qualified workshop.
When stationary: parking brake applied, the system does guarantee
immobilisation of the vehicle (whenparking on a very steep slope, for example).
Secure the immobilisation of the vehicle by engaginga gear with a manual or electronic gearbox, by placing
the gear selector in positionPwith an automatic gearbox, or by fitting a chock to one of the wheels.
Electric parking brake faultfixed.The electric parking brake has a fault. Contact a CITROËN dealer or a qualified workshop
without delay.
The parking brake can be released manually.
For more information on the electric parking brake,
refer to the corresponding section.

50
Monitoring
Under-inflationfixed.The pressure in one or more wheelsis too low. Check the pressure of the tyres as soon as possible.
This check should preferably be carried out when the
tyres are cold.
You must reinitialise the system after the adjustment
of one or more tyre pressures and after changing one or more wheels.

+
flashing then fixed, accompanied by the Service warning lamp.The s
ystem has fault: the tyrepressures are no longer monitored.Check the tyre pressures as soon as possible.
Have the system checked by a CITROËN dealer or a
qualified workshop.
Warning / indicator lampStateCauseAction / Observations
Foot on thebrake pedal*fixed. The brake pedal is not pressed. With an electronic gearbox, press the brake pedal to start the engine (lever in position N ).
If you wish to release the parking brake withoutpressing the brake pedal, this warning lamp will
remain on.
With an automatic gearbox, press the brake pedal to move the gear selector out of position P.P
flashing. With an electronic gearbox, if you hold the vehicle on an incline using
the accelerator for too long, the clutch overheats. Use the brake pedal and/or the parkin
g brake.
Foot on theclutch*fixed. In the STOP mode of Stop & Start,changing to START mode is refused
because the clutch pedal is not fully down.You must declutch full
y to allow the change to engineSTA R T m o d e .
*
Only with the type 1 instrument panel

1
59
Monitoring




Tr i p c o m p u t e r
Type 2 instrument panel


Information display in the instrument panel
)Press the button on the end of the wiper control stalk
to display the various tabs insuccession.- Th
e current information tab with:


●
the range,

●
the current fuel consumption,

●
the Stop & Star t time counter.
- Tr i p "1"
with:


●
the avera
ge speed.

●
the average fuel consumption,

●
the distance travelled, for the first trip.
-
Trip "2"
with:


●
t
he average speed,

●
the average fuel consumption,

●
the distance travelled,
for the second trip.





Tr ip reset
)
When the trip required is displayed, press
the control for more than two secondsor use the left hand thumb wheel of the steering mounted controls.
Trips "1"
and "2"are independent but their use
is identical.
For example, trip "1"can be used for daily figures, and trip "2"for monthly figures.
For all other display modes, pressing the end
of the wiper stalk displays this information in anew window. The displa
y of trip computer information ispermanent when you select the "DIALS"
display mode.

80
OFF
Access

Locking the vehicle
with exterior
perimeter
monitoring only
Deactivate the interior volumetric monitoringto avoid unwanted triggering of the alarm incertain cases such as:


- leaving a window par tially open,

- washing your vehicle,

- changing a wheel,


Deactivation of the volumetric monitoring
)
Switch of the ignition and within
ten seconds press this button until its indicator lamp is on fixed.
)Get out of the vehicle. )Immediately lock the vehicle using theremote control or the "Keyless Entry and Starting" system.
Only the exterior perimeter protection system is
active: the indicator lamp in the button flashes
once per second.
To be e
ffective, this deactivation must be doneevery time the ignition is switched off.
In the case of automatic locking of the vehicle (which occurs after a period of 30 seconds if a door or the boot is notopened), the monitoring system is not reactivated automatically. To reactivate it, it is necessary to unlock the vehicleand lock it again, using the remote control or the "Keyless Entry and Starting" system.

Deactivation
)Press one of the unlocking buttons on theremote control:
short press
long press
or )Unlock the vehicle using the "Keyless Entryand Starting" system.
The monitoring system is deactivated: the
indicator lamp in the button is off and the
direction indicators flash for about 2 seconds.

90
Comfort
Electric leg rest
Manual passenger seat
)Press the front or rear part of the control tounfold or fold away the leg rest.
The movement stops when you release the
control.







Heated seats control
)Use the adjustment wheel to switch on and select the level of heating required:

0:
Off. 1:Low.2:Medium. 3:
High.
With the en
gine running, the front seats can be heated separately.
Before operating the leg rest, ensurethat nothing could inter fere with itsmovement.


Electric passenger seat
)
Push the control forwards or backwards to unfold or fold away the leg rest.
The movement stops when you release thecontrol.

103
3
Comfort








Steering wheel adjustment
)
When stationary, pull the control lever to yrelease the adjustment mechanism. )
Adjust the height and reach to suit your driving position.)
Push the control lever to lock theadjustment mechanism.

As a safety precaution, these operations should only be carried out while the vehicle is stationary.
Child surveillance mirror

A child surveillance mirror is fitted above the rear view mirror. This allows you to monitor the
vehicle’s rear passengers, or it can facilitateconversation between the front and rear passengers without the need to move the rear
view mirror.
It can be folded awa
y to eliminate dazzle.

113
3
Comfort

"Rear" function
)Press this button to activate / deactivate the "Rear" function
The indicator lamp in the button
i
s on when the function is activated.
Settings for
passengers in the
3 rdrow of seats

From the secondary page of the " Airconditioning " menu: This
function gives rear passengers access to
t
he adjustment controls and allows.


- the distribution of air conditioned air to the
vents for the 2 nd row of seats,

- the distribution of ambient air to the vents
for the 3rdrow of seats.
)
Turn the upper wheel to open or close therear vent. )
Turn the lower knob to reduce (to the left)
or increase (to the right) the air flow.
Settings for passengers in
the 2ndrow of seats
) Press the vent cover.)
Adjust the flow of air to the two vents usingthe four-position wheel (off, low, medium, high).
)
Direct the vent by turning the cover.

118
Comfort























Front fi ttings

Sun visor. 2.
Card holder.3.
Glove box.4.
Central storage. It contains the power and audio sockets. 5.
Raised console with closed storage, lowconsole or removable console.
6.Cup holder.
7. Door pockets. 8.Storage below the steering wheel. (Handbook pack).