Page 65 of 420
63
2
Access
Deadlocking renders the interior door
controls inoperative. It also deactivates the manual central locking button.
Therefore, never leave anyone insidethe vehicle when it is deadlocked.
Deadlocking
)
With the vehicle unlocked, press
this button.
)Within five seconds, press this button again
to deadlock the vehicle.
This
function allows you to identify your vehicle
from a distance, par ticularly in poor light. Your
vehicle must be locked.
Locating your vehicle
) Press this button.
This will switch on the cour tesy lamps and the direction indicators will flash for about
10 seconds.
Page 66 of 420
64
Access
System that allows the opening, closingand starting of the vehicle while keeping theelectronic key on your person.
For reasons of safety and theftprotection, do not leave your electronic key in the vehicle, even when you are close to it. It is recommended that you keep it on your person: in a pocket, bag, ...
The electronic key can also be used as a remote control; refer to the "Key / remote control" section.
"Keyless Entry and Starting" system
Unlocking the vehicle
Complete unlocking
)
With the electronic key on your personand in the defined zone A, pass your handbehind the door handle of one of the front
doors to unlock the vehicle or press the
ta
ilgate opening control.
Pull the door handle to open the door.
Selective unlocking
)To unlock only the drivers door, with the electronic key on your person, pass your hand behind the driver's door handle. Pull
the door handle to open. )To unlock the complete vehicle, pass your hand behind one of the door handle of the front passenger door with the electronic
key close to the passenger door, or press the tailgate opening control with
the electronic key close to the rear of the
vehicle.
Activation or deactivation of the selectiveunlocking is done in the "Driving assistance"menu, then "Vehicle settings".
By default, complete unlocking is activated.
The direction indicators flash for a few seconds. Depending on version, the door mirrors
unfold, the welcome lighting comes on,the alarm is deactivated.
Page 70 of 420
68
Access
Emergency procedure
The integral key is used to lock and unlock the
vehicle when the electronic key cannot operate
and in the event of a fault with the Keyless Entry and Star ting system:
- cell battery flat, vehicle battery discharged
or disconnected, ...
- vehicle located in an area with stron
g
electromagnetic signals.
Emergency unlocking/locking
using the integral key
Unlocking
)
Tu r n t h e k ey towards the front of the vehicle
to unlock the vehicle.
Depending on your version, the direction indicators flash for a fewseconds, the door mirrors unfold andthe welcome lighting comes on.
If the alarm was activated, the siren willsound on opening the door with the key (in the remote control). It stops whenthe ignition is switched on.
)Press and hold the latch 1to extract the integral key 2.The integral key is also used to deactivate/reactivate the passenger's airbag.
It provides a backup means of locking thepassenger doors.
It also allows locking of the vehicle without activation of the alarm.
Page 95 of 420
93
3
Comfort
)Pull the strap B and guide the seatrearwards.
The backrest reclines and the seat base pivots
slightly.
"Comfort" position
Returning the seat to the initialposition
)Pull the strap B
and guide the seatforwards.
Super vise any movements of seats when made by children.
To remove it:
- move the head restraint to the high position,
- press lu
g Apulling the head restraint upwards at the same time. Th
e rear head restraints can be removed and have two positions:
- high, position for use,
- low, storage position. To raise a head restraint, pull it upwards.
To lower it, press lug A
then the head restraint.
Rear head restraints
Never drive with the head restraintsremoved; they must be in place and correctly adjusted.
T
o refit it:
- engage the rods of the head restraint in the
openings keeping then in line with the seat
back.
Comfort head restraints
Depending on version, the sides can be folded
to obtain a more comfortable position.
Page 96 of 420
94
Comfort
Flat floor
Folding a seat
From the outside ) Pull firmly upwards on strap C, as indicated
by the arrow, to unlock the seat; keep
pulling until the seat is fully folded.
Push the seat backrest gently forwards so that the backrest folds onto the seat cushion. The assembly lowers onto thefloor. From the boot, when loadin
g for example You can fold the second-row seats from theboot, after first folding the third-row seats. )Pull on the strap Dto release the seat in
question then push forwards lightly on the backrest.
To avoid any damage to the mechanism,
the strap D unclips if too much force isapplied. Simply clip it in place again for thesystem to be operational again.
)Place the seats in the fully back position. Each seat can be
folded onto the floor to vary
the the space available in the boot.
Page 104 of 420
102
Comfort
Rear view mirror
Adjustable mirror providing a central rearward view.
Equipped with an anti-dazzle system, which darkens the mirror glass and reduces the nuisance to
the driver caused b
y the sun, headlamps from other vehicles...
Manual day/night model
Ad
justment
)
Adjust the mirror so that the glass is
directed correctly in the "day" position.
As a safety measure, the mirrors should be adjusted to reduce the "blind spot".
In order to ensure optimum visibilityduring your manoeuvres, the mirror lightens automatically when reversegear is engaged.
Day / night position
)
Pull the lever to change to the "night" anti-dazzle position. )
Push the lever to change to the normal "day" position.
Automatic day/night model
By means of a sensor, which measures the
light from the rear of the vehicle, this system
automatically and progressively changes
between the day and night uses.
Automatic tilting in reverse gear
With the engine running, on engaging reversegear, the mirror glasses tilt downwards.
They return to their initial position:
-a few seconds after coming out of reverse gear, - once the speed of the vehicle exceeds6 mph (10 km/h),
- on switching off the engine.
S
ystem which provides a view of the ground
during parking manoeuvres in reverse gear.
Thi
s function can be deactivated in the"Driving assistance" menu, then " Vehicle
settings".
Page 106 of 420
104
Comfort
Vent ilat ion
The air circulating in the passenger compartment
is filtered and originates either from the outside via
the
grille located at the base of the windscreen or from the inside in air recirculation mode.
Air treatment
The incoming air follows various routes
depending on the controls selected by thedriver:
- direct arrival in the passenger compartment (air intake),
- passage through a heating circuit (heating),
- passage through a cooling circuit (air conditioning).
Control panel
The controls of this system are accessible
in the " Air conditioning " menu of the touchscreen tablet A .
The demisting/defrosting controls for the
windscreen and rear screen are located on theleft of the touch screen tablet.
1.Windscreen demisting-defrosting vents.2. Front quar ter light demisting-defrosting
vents. 3. Front side window demisting/defrosting
v
ents.
Adjustable side air vents.
4. Central adjustable air vents.
5. Air outlets for the front footwells.
6.Side vents for the 2nd row.
7. Air outlets for 2 nd
row footwells.
8.Sunshine sensor.
Air distribution
Page 121 of 420
119
3
Comfort
Sliding sun visor
Sliding blinds are provided for your protection
against bright sunlight. They can be adjusted manually. )Slide the blind to the desired position by pushing at A.
Sun visor rails
Glove box
Depending on equipment, it may contain a CD
player. ) To open the glove box, raise the handle.
It is illuminated when the lid is opened.
It is cooled by a manual directional ventilation
nozzle.
It is connected directly to your vehicle's air conditioning system and is supplied with cool
air whatever the temperature setting for the
passenger compartment.
The refrigeration of your glove box operates only with the engine running and the air conditioning on. Th
e blinds are extended on the sun visor rails.
Fold the visor downwards, to protect against dazzle to the face.
If dazzle is coming from the side windows,
detach the visor from its housing above the centre of the windscreen and pivot it to the side.
The visors are fitted with a locking system on
their central housing when the blind is reeled in.
To detach the visor or to reposition it, it must be
in a ver tical position.
Sliding blinds
Do not attach or suspend heavy objects on the slide rail of the sun blind.
