Page 31 of 420
1
29
Monitoring
ButtonCorresponding functionComments
Vehicle settings Access to other functions with settings that can be adjusted. The functions are grouped
together under three tabs:
- " Driving assistance
"
●
"Automatic rear wiper in reverse" (Activation of rear wiper linked to reverse gear; see
the "Visibility" section),
●
"Auto mirror dipping in reverse" (automatic dipping of door mirrors in reverse; see the"Comfort" section).
-"Lighting"
●
"Guide-me-home lighting" (Automatic guide-me-home lighting; see the "Visibility" section),
●
"Welcome lighting" (Exterior welcome lighting; see the "Visibility" section),
●
"Adaptive lighting" (Cornering lighting / Directional lighting; see the "Visibility" section),
●
"Mood lighting" (mood lighting; see the "Visibility" section).
- " Vehicle access"
●
"Tailgate motorisation" (Automatic operation of the tailgate; see the Access section),
●
"Driver plip action" (Selective unlocking of the driver's door; see the Access section).
Page 49 of 420

1
47
Monitoring
Braking
fixed. The braking system fluid level has
dropped significantly. You must stop as soon as it is safe to do so.
Top up with brake fluid listed by CITROËN.
If the problem persists, have the system checked by a
CITROËN dealer or a qualified workshop.
+
fixed
, associated
with the ABS warninglamp. Th
e electronic brake force distribution(EBFD) system has a fault. You must stop as soon as it is safe to do so.
Have it checked by a CITROËN dealer or a qualified
workshop.
Warning / indicator lampStateCauseAction / Observations
Anti-lockBraking System(ABS)
fixed. The anti-lock braking system has a fault. The vehicle retains conventional braking.
Drive carefully at reduced speed and contact aCITROËN dealer or a qualified workshop without
delay.
Dynamic stability control(DSC/ASR)
flashing. The DSC/ASR regulation is
operating. The system optimises traction and improves the
directional stability of the vehicle.
fixed. Unless it has been deactivated (button pressed and its indicator lamp
on) the DSC/ASR system has a fault. Have it checked b
y a CITROËN or a qualified
workshop.
Engine autodiagnosissystem
flashing.The engine management system hasa fault. Risk of destruction of the catalytic converter.
Have it checked by a CITROËN dealer or a qualified
workshop.
fix
ed. The emission control system has a
fault.
The warning lamp should go off when the engine is started.
If it does not
go off, contact a CITROËN dealer or qualified
workshop without delay.
Page 54 of 420

52
Monitoring
Service overdue
For 5 seconds after the ignition is switched on,
the spanner flashesto indicate that the service must be carried out as soon as possible. Example:the ser vice is overdue by 186 miles (300 km).
For 5 seconds after the ignition is switched on,
the screen indicates:
The distance remaining may be weighted by the time factor, dependingon the driving conditions. Therefore, the spanner may also comeon if you have exceeded the period since the last service, indicated in the servicing and warranty booklet.
5 seconds after the ignition is switched on,
the distance recorder resumes its normal
operation. The spanner remains on.
Service indicator zero reset
After each ser vice, the ser vice indicator mustbe reset to zero.
The procedure for resetting to zero is as
follows: ) switch off the ignition, )
press and hold the trip distance recorder
zero reset button, ) switch on the ignition; the distance recorder display begins a countdown, )
when the display indicates "=0", release
the button; the spanner disappears.
Following this operation, if you wish to disconnect the battery, lock the vehicle and wait at least five minutes for the zero reset to be taken into account.
Retrieving the serviceinformation
You can access the ser vice information at anytime. )Press the trip distance recorder zero reset button.
The ser vice information is displayed for afew seconds, then disappears.
Page 56 of 420
54
Monitoring
Distance recorders
The total and trip distances are displayed for
thirty seconds when the ignition is switched off,
when the driver's door is opened and when the
v
ehicle is locked or unlocked.
To c o nform to legislation in the country you are crossing, change the units of distance (miles or km) via theconfiguration menu.
Trip distance recorder
System which measures a distance travelled
during a day or other period since it was reset
to zero by the driver. )With the ignition on, press the button until
zeros appear.
Total distance recorder
System which measures the total distance
travelled by the vehicle since its first registration.
Page 63 of 420

61
2
Access
Remote control
Electronic key
System which permits remote locking or
unlocking of the vehicle as well as opening the
boot and, depending on version, operation of
the alarm.
It also allows the location and star ting of the
vehicle as well as providing protection against
theft.
The electronic key includes an integral back-up emergency key.
Unlocking the vehicle
)
Press this button.
Unlocking the vehicle and
openin
g the boot
The direction indicators flash for a few seconds. The door mirror spot lampscome on. Depending on version, the door mirrors unfold, the welcome lighting comes on, the alarm is deactivated.
)
Make a long press on thisbutton to unlock the vehicleand, depending on version,release the tailgate or open the
motorised tailgate.
) To unlock the other doors and the boot,
press this button again.
The settin
g of the selective unlocking is done in
the "Driving assistance" menu, then "Vehicle
settings".Complete unlocking is activated by default.
Complete unlocking
) To unlock only the driver's door,
press this button once.
Selective unlocking Settings for the motorised tailgate can be
adjusted in the "Driving assistance " menu,
then " Vehicle settings". Motorised operation is activated by default.
Page 64 of 420