2013 AUDI Q7 ECO mode

12 Instruments and warning/indicator lights
Speedometer with odometer
The speedometer shows you the vehicle
speed, and the odometer shows you how many miles (kilometers) you have driven.
Fig. 5 Instrument cluster Odometer and reset button
The odometer and trip odometer are located
inside the speedometer.
- USA mode ls - Miles
- Canada models -Kilometers
You can switch the display from miles to kilo­ meters and vice versa via the MMI. You can
find out more in the MMI manual.
Lower odometer
The lower odometer shows the total number
of mi les (kilometers) driven.
Upper odometer (trip odometer)
The upper odometer shows the tota l number
of mi les (kilometers) driven since you last re­
set the odometer to zero. You can use this od­
ometer when you want to keep track of how many miles (k ilometers) you have driven for a
single trip or errand. The last digit indicates
1/10 of a mile (100 meters).
You can reset the trip odometer to zero by
pressing the Reset button
~o.
Malfunction message
If there is a malfunction somewhere in the in­
strument cluster,
dEF will appear in the trip
odometer and will stay on. Contact your au ­
thorized Audi dealer to have the problem cor­
rected.
(D Tips
- When you open t he driver door, the time,
date and odometer are disp layed for an
add itiona l 30 seconds.
- You can also call up the display with the
I CHECK I button c> page 12 while the ig­
nition is switched off.
Fuel gauge
The fue l gauge only works when the ignition is
on .
When the needle reaches the reserve mark,
the
c> page 35 00] symbol appears in the in­
strument cluster d isplay as well as the mes ­
sage
Please refuel. This message is meant to
remind you to
refuel.
The total tank capacity of your vehicle is listed
in
.:> page 322 .
@ Note
Never run the tank completely dry. An ir­
regular supply of fuel can cause engine
misfiring and fuel could enter the exhaust
system. The catalytic converter could then
overheat and be damaged.
~ button
You can perform different functions with this
button .
Fig. 6 CHECK button in th e ins trument cluster
The !CHECK I button performs the following
functions:

Instrument s and warnin g/indic ator ligh ts 15
D
Canada m od els: Anti-lock brake
system (ABS) defective
¢ page 18
USA model s: Parking brake
¢page 19
Canada models : Parking brake
¢page 19
USA model s: Brake malfunction
¢page 19
Canada m odels : Brake malfunc­
tion
¢page 19
Ve hicl es with th e adaptive cruise contro l*
have the following additiona l check lamps:
I I II c:=:)
c:=:)
I I I I c:=:)
Open road
¢ page 121
Driving in traffic
¢page 121
Request for driver to as ­
sume control
¢page 121
_& WARNING
-Failure to heed warning lights and other
important vehicle info rmation may result
in serious persona l injury or vehicle dam­
age.
- Whenever sta lled or stopped for repair,
move the vehicle a safe distance off the
road, stop the engine, and turn on the
emergency flasher¢
page 60.
- The engine compartment of any motor
vehicle is a potentially ha zardous area.
Before you check anything in the engine
compartment, stop the engine and let it cool down . Always exercise extreme cau­
t ion when working under the hood
¢ page 255, Engine compartment .
Many functions are monitored by the Auto­
Check system ¢
page 30. Malfunct ions
or faults will be identified e ither w ith a red symbol (priority 1
-Danger!) or with a ye l­
l ow symbo l (priority
2 - Warning).
EPC Electronic power control
Applies to vehicles : with gasoline engine
This warning/indicator light monitors the
electronic power control .
The ~ warning/indicator light ( Electronic
Power Contro l) illuminates when you turn on
the ignit ion as a f unct ion check.
(D Tips
If this warn ing/ indica tor light illum inates
while yo u are d riving, then there is a mal­
funct ion in the engine electronics. Have
the malfunct ion corrected as soon as pos­
sib le by your authorized A udi dealer or
qualified workshop .
W Glow plug system
Applies to vehicles: with diese l eng ine
The control light illuminat es when the glow
plug system is active.
If the lml indicator light illuminates, the g low
pl ug system is active . You should start the en­
gine immediately after the indicator light
switches off. The indicato r light only illum i­
nates for approxim ately 1 second if the en­
gine is warm or if the outs ide temperature is
above 46 QF (8 QC) .
(D Tips
-If the glow plug indicator light i llum i­
nates while dr iving, there is an eng ine
cont rol malfunction . The engine should
be checked immed iate ly .
- If the ind icator light does not illuminate
at all when switch ing the ig nition on,
there may be a malfunction in the glow
plug system. The engine sho uld be
c hecked.

16 Instrum ent s and w arn ing /indic ato r light s
;;./~ Electronic Stabilization Control
(ESC)
This warning/indicator light monitors the
Electronic Stabilization Control.
If the JjJ indicator lamp blinks while driving,
the ESC or ASR (Ant i-S lip Regulation) is active­
l y regulating.
If th€
JjJ indicator lamp illuminates, the sys ­
tem has switched the ESC off. In this case, you
can switch the ignition off and then on to
switch the ESC on again. The system is func­
tioning comp letely whe n the indicator lamp
switches off .
If the
i indicator lamp illuminates, the ESC
was switched off with the
I ~ O FF I button.
St abili zation con trol (E SC/ ABS): Fa ult! See
owner 's manu al
If th€ J_j) indicator lamp and the [I] ABS indi­
cator lamp illuminate and the dr iver message
appears, the ABS or e lectronic differential lock
i s ma lfunctioning . This also interrupts the
ESC. The brakes st ill function with the ir nor­
mal power, but ABS is not active.
Drive to your authorized Aud i dealer immedi ·
ately to have the malfunction corrected .
For more informat ion about the ESC
c=;,page225.
~/ !'!r Safety systems
The I (USA models)/ . (Canada models) in­
d icator light monitors the safety systems (e .g.
a irbags, pretensioners) and illuminates for a
few seconds each time you switch the ignition
on.
I f the
I (USA models) • (Canada models)
i ndi cator light does not go out, or if it illumi­
nates w hile you are driv ing, or if it sta rts to
b link, then there is a ma lfunct ion somewhere
in the system. If the light does not illuminate
when you switch the ignition on, this also
means there is a ma lfunction.
A WARNING
If you have a ma lfunction in the safety sys­
tems, contact your authorized Audi dealer
i mmediately. Otherwise the safety sys­
tems may not work properly in an acc i­
den t.
¢ Q Turn signals
The indicator light blinks when you use either
turn signal .
Whenever you use the left a or the right .
turn s ignal, the indicator light blinks . When
you use the emergency flashers, both indica­ tor lights flash .
If one of the turn signa l light bulbs burn out,
the turn signal will blink twice as fast as nor­ mal.
This does not apply, however, in towing mode.
The ind icator light does not flash if a turn sig­
nal is out on the trailer or the towing veh icle .
Additional informat ion on the turn s ignals
¢ page 60.
¢1¢ Trailer turn signal assembly
Applies to veh icles: w ith towing hitch
The indicator light also blinks if the turn sig ­
nal is operated when towing a trailer.
The ind icator light. bli nks when the turn
s ignal is used, if a tra iler has been proper ly
co nn ected to the vehicle.
If one of the turn signa l bulbs on the trailer is
burned out or defective, the ind icator light
will not blink when you use the turn signa ls .
(D Tips
For vehicles with a factory installed towing
hitch or a trailer hitch that was installed
later according to factory spec ificat ions,
the trailer turn sig nal assembly is actuat­
ed.

Instrument s and warnin g/indic ator ligh ts 17
o Malfunction Indicator Lamp (MIL)
The Malfunction Indicator Lamp (M IL) is part
of the On-Board D iagnost ic (OBD II) system.
The symbol
¢'4 lights up when the ignit ion is
turned on and will turn off after the engine
has started and has sett led at a constant idle
speed. This ind icates that the MIL is working
properly .
The warning light i lluminates when there is a
malfunction in the engine e lectronic system .
Contact your author ized Audi dealer and have
the ma lfunction corrected .
An improperl y clo sed fuel filler cap m ay als o
c a u se the MIL light to illumi nate (only
v ehicle s with ga solin e eng in e )
c> page 259.
For more informat ion c> page 2 7.
0 Adaptive Air Suspension
Applies to vehicles: with Adaptive Air Suspension
This IIJ warning/indicator light has the fol­
l owing functions:
- It illuminates for a few seconds after the ig­
nition is tu rned on as function check and
then goes out .
- If the warning/ind icator light illuminates or
blinks continuously, there is a system fau lt
in the Adaptive A ir Suspension . A system
fault can result in limited ride comfort and
low ground cl earance . Drive safely to the
nearest authorized Aud i dealer or qualified
workshop, and have the fault corrected .
- If the warning/ind icator light flashes, you
should not drive the vehicle. The flash ing
warning/ind icator light po ints to an extreme
High level. A very
pronounced lifting of the
vehicle (extreme High level) can resu lt, fo r
example, when a heavy load is removed
from the vehicle. As soon as the leve l has re­
turned to normal, the warning/indicator
light stops flashing, and yo u can drive away.
- If the warning/ind icator light flashes in con ­
junction with the
II warning/indicator
light, you sho uld not drive off immediate ly
i n order to prevent damage to the under­
body . The two warning/ind icator lights flashing together points to an extreme Low
level. A very
pronounced lowering of the ve­
hicle (extreme Low leve l) can result, for ex­
ample, from a heavy load . As soon as the
level has returned to normal, the warning/
ind icator lights stop flashing, and you can
dr ive away.
(D Note
If the warning/indicator light flashes in
conjunction with the
II warning/ind ica-
tor light, you should not dr ive the veh icle
because low-lying veh icle parts can bot-
tom out as you d rive over uneven ground
a n d be damaged as a result.
c.:, Adaptive Air Suspension
Applies to vehicles: with Adaptive Air Suspension
This II warning/indicator light has the fo l­
lowing functions:
- I t illuminates for a few seconds after the ig ­
nition is turned on as func tion check and
then goes out .
- I t comes o n for approximate ly 15 seconds
as a warning of
reduced ground clear ance , if
the dynam ic mode is activated and i f the ig­
nition is switched on
r:!;> page 155, Chassis
controls.
- If the warning/indicator light flashes in con­
junction with
the m warning/indicator
light, you should not drive the veh icle imme ­
diately in order to prevent damage to the
underbody. The two warn ing/ indicator
lights flashing together points to an ex­
treme Low level. A very
pronounced lower­
ing
of the vehicle (extreme Low level) can re­
sult, for example, from a heavy load. As
soon as the level has returned to normal,
the warning/ind icator lights stop flashing,
and you can d rive away.
(D Note
If the warning/ indica tor ligh t flashes in
conjunction with
the m warn ing/ indica­
tor light, you should not drive the vehicle

18 Instruments and warning/indicator lights
because low-lying vehicle parts can bot­
tom out as you drive over uneven ground
and be damaged as a result.
~ Safety belts
This warning/indicator light reminds you to
put on your safety belt.
The . warning/indicator light ill uminates
when the ignition is switched on to remind
the driver and (on USA models only) any front passenger to put on the safety belt . Add ition­
ally, an acoustic warning (gong) wi ll also
sound.
F or more Information
~ page 175, Safety
belt warning light.
~D High beam
The ii warning/indicator light illuminates
when the high beams are on or when you use
the head light flasher . For more informat ion
about using the high beams, see
~page 60.
(J) Tire pressure monitoring system -
telltale ind icator lamp
The warning/indicator light appears in the
event of a significant loss of tire pressure or if
there is a malfunction .
The indicator light IE illuminates to check
the function when you switch on the ignition.
If the
IE symbol remains on or blinks after
you switch on the ignition, there is a loss of
tire pressure or a system malfunction. If there
is a system malfunction, see your authorized
Aud i dealer as soon as possible.
Detailed information on the tire pressure
monitoring system can be found in
~page 298.
CRUISE/'(-) Cruise control
The (ij;\1)~1~ (USA models) /. (Canada mod­
e ls) warn ing/indicator light illuminates when
the cruise contro l is activated.
ABS /(8) Anti -lock brake system (ABS)
This warning/indicator light monitors the ABS
and the electronic differential lock (EDL) .
The E (USA models) ;fl] (Canada mode ls)
warning/indicator light will come on for a few
seconds when the ignition is sw itched on . T he
l ight will go out after an automatic check se­
quence is comp leted.
There is a malfunction in the ABS when:
-The warning/indicator light does not illumi­
nate when you switch on the ignition.
- The warning/indicator light does not go out
after a few seconds.
- The warning/indicator light illuminates
while driving.
The brake system will still respond even
without the assistance of the ABS system.
See your authorized Audi dealer as soon as
possible to restore full braking performance.
For more information regarding the ABS
~page 229.
The ABS warning light and the brake warn­
ing light come on together. The ABS will not
work and you will notice a change in braking
response and performance.
Malfunction in the brake system
If the brake warning light ~ page 19 and
the ABS warning ill uminate
together there
may be a malfunction in the ABS, and there
may also be a malfunction in the brake system
i tself ~
A.
In the event of a malfunction in the brake
system
the warning/indicator light 11111
(USA models)/ . (Canada models) in the in­
strument cluster flashes. By press ing the
jCHECKI button, you can b ring up a driver
message which explains the malfunction in
more detail. Please note
~ page 32.
Malfunction in the electronic differential
lock (EDL)
The EDL works together with the ABS. The
ABS wa rning lig ht will come on if there is a
malfu nction in the EDL system
q page 227.

will remain in effect until you turn off the igni­
tion, assuming that you have not changed or
reset the setting.
The speed warning symbol. (USA models)/
• (Canada mode ls) in the warning 1 display
appears when you exceed the maximum
speed . It goes out when the speed falls below
the stored maximum speed.
The speed warning symbo l wi ll also go out if
the speed
exceeds the stored maximum speed
by more than about 2S mph (40 km/h) for at
least 10 seconds. The stored maximum speed
is deleted.
Setting speed warning 1
<:!;> page 29 .
Speed warn ing 2
Storing warn ing 2 is recommended if you al­
ways
want to be reminded of a certa in speed,
for example when you a re traveling in a coun­
try that has a general maximum speed limit,
or if you do not want to exceed a specified
speed for winter tires.
The speed warning 2 symbol, . (USA mod­
els)/ . (Canada models) appears in the d is ­
p lay when you exceed the stored speed limit.
Unlike warning 1, it will not go out unti l the
vehicle speed drops below the stored speed
limit.
Setting speed warning 2
r:!;> page 29 .
@ Tips
Even though your vehicle is equipped with
a speed warning system, you should sti ll
watch the speedometer to make sure you are not driving faster than the speed lim it.
Dri ver inform ation di spl ay 29
Speed warning 1: setting a speed limit
Warning threshold 1 is set by the I CH ECKi
button.
Fig . 23 CHECK button in the instrument cluster
Storing the ma ximum speed
"' Drive at the des ired maximu m speed .
"' Briefly p ress the I CH ECK i bu tton
c;> fig. 23.
Resetting the m aximum speed
.. Drive the veh icle at a speed of at least
3 mph (5 km/h)
.. Press the ICHECK I button for more than 2
seconds.
T he speed warn ing symbol . (USA models)/
• (Canada models) will appear briefly in the
display when you release the I CHECK
I button
to indicate t hat the maximum speed has been
stored suc cessf ully.
T he maximum speed rema ins stored until it is
changed by pressing the
I CH ECKi button again
briefly or until it is deleted by a lengthy push
o n the bu tton.
Speed warning 2: setting a speed limit
Warning threshold 2 is set, changed and de­
le ted in the MMI .
.. Select: I CAR I function button > Systems*
contro l butto n > In strum ent clu ster >
Spe ed warning . Or
.. Select: ICAR lfunc tion b utton> C ar sy s­
tem s*
contro l button > Driver a ssist >
Speed warning.
Warning threshold 2 can be set in the speed
range starting from 20 mph to 150 mph ..,.

For example, the symbol II appears in the
display, indicating low windsh ield washer flu­
id level. The follow ing message also appears:
Pl eas e refill w asher fl uid
The driver message disappears after a few
seconds. The driver message can be displayed
again by briefly pressi ng the
!CH ECK I button.
Red symbols
A red symbol means DANGER.
Fig . 25 Disp lay: engin e coola nt l eve l wa rnin g ( pri ority
1)
• Pull off the road .
• Stop the veh icle.
• Turn off the engine .
• Check the ma lfunctioning system. Contact
your authorized Aud i dea ler or a qualified
workshop for assistance.
Red symbols indicate a priority 1 ma lfunction
- Danger!
W ith a pr iority 1 malfunction, a large symbol
appears in the center area of the display
¢ fig. 25. When the symbol appears , three
warning tones sound in succession . T he sym­
bol co nti nues to bli nk until the ma lf u nct ion
has been repaired.
I f there are
more than one priority 1 ma lfunc­
tions, the symbols appear one after the other
for about 2 seconds.
An addit ional driver message can also be d is­
p layed by briefly pressing the
I C HECK ! button.
T he red symbols mean :
Driver inform ation di spl ay 31
Alternato r malfunction
¢ page 31
USA model s: Brake system
malfunction
¢page32
Canad a mo dels: Brake sys­
tem malfunction
¢ page 32
Engine coolant level too
low/engine coolant temper­
ature too high
¢ page32
Engine o il pressu re too low
¢ page33
Refill Ad Blue*
¢page 261
AdBlue malfunction*
¢page261
------------~
(D Tips
Faulty steering
¢page33
Fa ulty ignition swi tch
¢ page34
- If the warning/indicator light 1111 (USA
models)/ . (Canada models) in the in­
strument cluster flashes, there is a brake
system malfunction . By pressing the
!CHECK I button, you can bring up a dr iver
message which exp lains the malfunction
in more detail. Please note
¢ page 32 .
-Speed warnings threshold 1. (USA
mode ls)/ . (Canada mode ls) and
t hreshold 2. (USA models)/ . (Cana­
da mode ls) a re a lso shown as red sym­
bols. The warning is a lways shown as a
small symbol in the upper area of the
display ¢
page 28.
0 Alternator malfunction
If the . symbol in the instrument panel dis­
play flashes, then there is a malfunction in the
alternato r or the veh icle elect ron ics . A war n-
ing to the drive r will appear, too . The driver .,.

32 Driver in formation d isplay
warning goes out after about 5 seconds, but it
can be brought up at any time by pressing the
I CHECK ! button again .
Usually , you can still drive to the next dealer ­
ship. Turn off all b ut the most necessary elec­
trica l cons umers, sinc e these drain the vehi­
cle's battery.
(D Note
If the . warning symbol (coolant system
malfunction) also lights up on the instru­
ment panel during the trip ¢
page 32,
then you have to stop immediately and
turn off the eng ine . The coolant pump is
not working anymore -danger of damage
to the eng ine!
BRAKE/( ©) Brake system malfunction
A malfunc tion in the brake system mus t be
repaired as soon as possible .
If the warn ing /indicator light~ (USA
models)/ . (Canada mode ls) in the instru­
ment cluster flashes, there is a brake system
malfunction . By pressing the
I CH ECK ! button,
you can bring up a dr iver message which ex­
p la ins the ma lfu nction in more detail.
Stop vehicle and check brake fluid level
> Pul l off the road .
> Stop the vehicle .
> Turn off the engine.
> Check the brake flu id level ¢ page 274 .
> Contact you r neares t authorized Audi dea le r
o r qualified workshop if necessa ry.
Warning! Fault in brake system. Contact
workshop
> Drive carefully to the neares t authorized
Audi de aler or qua lified workshop and h ave
the mal function cor rected ¢
&_.
If the A BS system malfunctions, the ABS
war ning/ indica to r li ght illum inates toge ther
with the bra ke sys tem mal func tion warning/
indicator light¢&. .
A WARNING
-Always observe the war nings in
¢ page 255, Engine compartment, be ­
fore open ing the hood and check ing the
b ra ke fluid .
- Driving with low brake f lu id is a safety
hazard . Stop the car a nd get professiona l
assistance .
-USA models: If the ~ warning light
a nd the
m:11 warning light come on to­
ge the r, the rea r whee ls cou ld lo ck up
fi rs t un der hard br aking. Rear wheel lock­
up can ca use loss of vehicle co ntrol and
an accident . Have your vehicle repaired
immed iate ly by yo ur authorized Au di
dea le r or a qua lified workshop. Drive
slowly and avo id sudden, hard brake ap­
plications.
- Canada models: If the brake warning
light . and the ABS warning light
[I]
come on together, the rear wheels could
lock up first unde r hard braking . Rear
wheel lock-up can cause loss of vehicle
cont ro l and a n ac cident . Have yo ur vehi­
cle repaired immed iately by yo ur au tho r­
i z ed A udi d ealer or a qualified wor ksh op .
D rive s low ly and avoid s udden, hard
brake applications .
-L Engine cooling system malfunction
A malfunction in the engine cooling sys tem
must be repaired as soon as possible.
When the. symbo l in t he d isplay b lin ks ,
then either the e ngine coo lant
temperature is
too high, o r th e coo lan t
level is too low. An
additional drive r message can also be dis ­
played by p ressing the
I CHECK ! button:
Switch off engine and ch eck coolant level
> Pull off the road.
> Stop the vehicle .
> Tu rn off the engine.
> Check coolant leve l ¢page 272.
> Add coo lant if necessary ¢ page 2 7 3.
> Continue driv ing on ly after t he engine cool-
ant warning/indicator light goes out .
1J>