2013 Alfa Romeo Giulietta maintenance

REAR FOG LIGHTS/REVERSING LIGHTSTo replace the bulbs proceed as follows:
❒open the boot and remove the cover A fig. 146 using a screwdriver
in the point indicated by an arrow;
❒remove the connector A fig. 147 and extract the bulb holder
assembly by operating on the retaining tab B and then by loosening
the screw C;
❒remove the bulb by pushing it slightly and turning it anticlockwise (D
= reverse light bulb; E = rear fog light bulb);
❒refit the bulb holder assembly positioning it correctly, fasten screw C
and then fix it by means of the retaining tab B. Reconnect connector
A then refit cover A fig. 146.IMPORTANT Protect the tip of the screwdriver with a cloth to prevent
scratching when removing the cover A.
fig. 146
A0K0176
fig. 147
A0K0177
160GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

3rd
BRAKE LIGHTS
These are LED lights and are located on the spoiler integrated with the
tailgate. Contact Alfa Romeo Authorized Services to replace these
lights.
NUMBER PLATE LIGHTSTo replace the bulbs proceed as follows:
❒remove the number plate light units fig. 148;
❒turn the bulb holder B fig. 149 anticlockwise, extract the bulb C and
replace it;
fig. 148
A0K0147
fig. 149
A0K0146
161GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVINGIN AN
EMERGENCYSERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

REPLACING INTERIOR BULBSFRONT ROOF LIGHTTo change the bulb, proceed as follows:
❒remove the roof light A fig. 150 working at the points indicated by
the arrows;
❒open the flap B fig. 151 and replace the bulbs C releasing them
from the side contacts. Make sure that the new bulbs are correctly
secured between the contacts;
❒reclose the flap B fig. 151 and fix the roof light A fig. 150 in its
housing making sure that it is locked.REAR ROOF LIGHTTo change the bulb, proceed as follows:
❒remove the roof light A fig. 152 working at the points indicated by
the arrows;❒open the protective flap B fig. 153 and replace the bulb C releasing
it from the side contacts. Make sure that the new bulb is correctly
secured between the contacts;
❒reclose the protective flap B fig. 153 and fix the roof light A fig. 152
in its housing making sure that it is locked.
fig. 150
A0K0090
fig. 151
A0K0089
fig. 152
A0K0062
162GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

LUGGAGE COMPARTMENT
ROOF LIGHTTo change the bulb, proceed as follows:
❒open the luggage compartment and extract the roof light A fig. 154
working in the point shown by the arrow;❒open the protection B fig. 155 and replace the bulb;
❒re-close the protection B on the lens;
❒refit the roof light A fig. 154 by inserting it in its correct position
firstly on one side and then pressing on the other until it clicks into
place.
fig. 153
A0K0091
fig. 154
A0K0173
fig. 155
A0K0148
163GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVINGIN AN
EMERGENCYSERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

GLOVE COMPARTMENT LIGHTTo change the bulb, proceed as follows:
❒open the glove compartment and extract the light A fig. 156;
❒open the protection B and replace the bulb;
❒re-close the protection B on the lens;
❒refit the roof light A by inserting it in its correct position firstly on one
side and then pressing on the other until it clicks into place.
COURTESY LIGHT(for versions/markets, where provided)
For the replacement of these bulbs, contact Alfa Romeo Authorized
Services.
fig. 156
A0K0172
164GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

REPLACING FUSESGENERAL INFORMATIONFuses protect the electrical system: they intervene (blow) in the event of
a failure or improper intervention on the system.
When a device does not work, check the condition of its protective
fuse: the conductor element A fig. 157 must be intact.
If it is not, replace the blown fuse with another with the same
amperage (same colour).
B = undamaged fuse.
C = fuse with damaged filament.
Use the pliers A fig. 158 under the engine compartment fusebox lid to
remove the fuses (see “Engine compartment fusebox” for how to
remove the lid).
Contact Alfa Romeo Authorized Services should the
fuse blow again.
Never replace a fuse with metal wires or anything else.Never replace a fuse with another with a higher amp
rating; DANGER OF FIRE.If a general protection fuse (MAXI-FUSE, MEGA-FUSE,
MIDI-FUSE) blows, contact Alfa Romeo Authorized
Services.Remove the key from the ignition switch and switch off
all loads before replacing a fuse.
fig. 157
A0K0042
fig. 158
A0K0207
165GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVINGIN AN
EMERGENCYSERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

Contact Alfa Romeo Authorized Services if a safety
system (air bags, brakes), engine system (engine,
gearbox) or steering system general protection fuse
blows.
FUSE LOCATIONFuses are grouped together in three fuse boxes located in the engine
compartment, dashboard and luggage compartment.
Engine compartment fuse box
This is located next to the battery fig. 160: to access the fuses, undo the
screws A fig. 159 and remove cover B.
The number identifying the electrical component corresponding to each
fuse is on the back of the cover.
After replacing the fuse, make sure you close cover B on the fuse box.
If you have to wash the engine compartment, take care not
to aim the jet of water directly at the fuse box or
windscreen wiper motors.
fig. 159
A0K0174
fig. 160
A0K0231
166GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX

Dashboard fuse box
Insert a hand in housing A fig. 162 and lower flap B to access the
fuses fig. 161.
fig. 161
A0K0206
fig. 162
A0K0244
167GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVINGIN AN
EMERGENCYSERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX