2013 Alfa Romeo Giulietta fog light

[x] Cancel search: fog light

Page 7 of 292

Alfa Romeo Giulietta 2013  Owner handbook (in English) GETTING TO KNOW YOUR CAR
DASHBOARDThe presence and position of the controls, instruments and indicators may vary according to the different versions.1. Fixed vent for directing air to the side windows

Page 19 of 292

Alfa Romeo Giulietta 2013  Owner handbook (in English) Rear fog lights (amber)
The warning light switches on when the rear fog lights are switched on.
The LED above the
button will also light up when the lights are on.
Front fog lights (green)
The warning

Page 21 of 292

Alfa Romeo Giulietta 2013  Owner handbook (in English) Exterior lights failure
On some versions, the display will show a message + symbol if a fault
is detected in one of the following lights:
❒daytime running lights (DRL)
❒side lights
❒direction in

Page 67 of 292

Alfa Romeo Giulietta 2013  Owner handbook (in English) SIDE LIGHTS/DIPPED BEAM
HEADLIGHTSWith the ignition key turned to MAR, turn ring nut A fig. 39 to
.
The daytime running lights are switched off and the side lights and
dipped headlights are switched o

Page 77 of 292

Alfa Romeo Giulietta 2013  Owner handbook (in English) CONTROLSHAZARD WARNING LIGHTSPress switch A fig. 48 to switch on/off the lights.
Warning lights
and
on the instrument panel switch on and
switch A flashes when the lights are on.
The use of hazard lig

Page 99 of 292

Alfa Romeo Giulietta 2013  Owner handbook (in English) HEADLIGHTSLIGHT BEAM DIRECTIONThe correct orientation of the headlights is important for the driver's
comfort and safety as well as for all other road users. This is also
covered by a specific rul

Page 160 of 292

Alfa Romeo Giulietta 2013  Owner handbook (in English) Bulbs Type Power Re. Figure
Front side lights/Daytime running lights (DRL) LEDs - -
Rear side lights LEDs - -
Dipped headlights H7 55W D
Main beam headlamps H1 55W E
Main/Dipped beams (versions with B

Page 162 of 292

Alfa Romeo Giulietta 2013  Owner handbook (in English) DIPPED HEADLIGHTSTo change the bulb, proceed as follows:
❒remove cover B fig. 140;
❒remove the connector A fig. 142, press the tab B forward and then
release by pushing it towards the inside the c
Page:   1-8 9-16 next >