159
Playing an iPod®1.Unclip the USB connector a
nd loosen the adapter cable.
2.Install the iPod® dock connector to the USB connector.■Connecting an iPod®
1Connecting an iPod®•Do not leave the iPod® in the vehicle. Direct sunlight and high temp
eratures may damage
it.•Do not use an extension cable with the USB adapter cable.•Do not connect your iPod® using a hub.•Do not use a device such as a card reader or hard disk drive, as th
e device or your tracks
may be damaged.•We recommend backing up your data before using the device in your vehicle.•Displayed messages ma
y vary depending on
the device model and software version.Your audio system ma
y not work with all
software versions
of these devices.
If the audio system do
es not recognize your
iPod®, try reconne
cting it a few times or reboot
the device.
■Model Compatibility
Model
iPod (5th generation) iPod classic 80GB/160GB (launch in 2007)iPod classic 120GB (launch in 2008) iPod nanoiPod touch
QRG
Audio
210Troubleshooting
TroubleshootingMap, Voice, Entering Destinations
Problem
Solution
The Startup Confirmation screen is displayed every time I start the car.
This is normal. The Startup Confirmation scr
een reminds you and your guest drivers to
always operate the navigation system in a
safe manner. If you do not select "OK" at
startup, voice commands will not work.
The navigation system reboots by itself (returns to the opening screen).
A reboot can be caused by extreme temper
atures or shock from bumpy roads, and
does not necessarily indicate a problem. If this happens frequently, please see your dealer.
How do I specify a destination when an entered city or street could not be found?
• Try entering the street first.
Some cities are lumped in with a major metro area. In
rural “unverified” areas or new subdivisions,
streets may be missing or only partially
numbered.• Try selecting the destinati
on directly from the map.
2Map Input
P. 88
Why do some letters become grayed out when I enter an address?
As you enter each letter in an address or a place/landmark, the navigation system looks in the database to see what letters are possible and grays out letters that do not apply.
How do I delete Personal Addresses, Previous Destinations, or the Home Address?
1.Press the INFO/PHONE button. Select
Setup
> Personal Information
to display the
types of information.2.Select the type of address to delete.3.Select
Delete
.
I cannot hear the navigation system voice.
1.Press the INFO/PHONE button. Select
Setup
and check that
Volume
is not set to
OFF
.
2Display and Volume Settings
P. 24
2.Select
Other
> Basic Settings
and set
Voice Recognition Tutor
to
ON
.
2Basic Settings
P. 26
The voice control system is having difficulty recognizing my voice commands.
• Check that the vents are not blowing air onto the microphone on the ceiling, the vehicle is as quiet as possible, and you are using the correct command when speaking. 2Voice Recognition
P. 23
•Say
d
“Help”
on any screen to see a list of the applicable voice commands.
QRG
