Page 127 of 252
126
Changing Your Route
Adding Waypoints
Navigation
1.Rotate
i
to select
ADD TO Dest.
List
. Press
u
.
2.Rotate
i
to select a location in
the Destination List. Press
u
.
3.Move
r to select
OK
.
The route is automatically recalculated and displayed on the map screen.
■Adding Waypoints from the Calculate Route Screen
QRG
Page 128 of 252
127
Changing Your Route
Editing the Destination List
Editing the Destination ListHMENU button (when en route)
Destination List
Delete or edit the order of waypoints.
1.Move
y
to select
Edit
.
Move
w
to select
Map
to
display the destination and waypoints on the map screen.
2.Rotate
i
to select an item.
3.Move
r to select
OK
.
The route is automatically recalculated and displayed on the map screen.
The following options are available: •Delete
: Rotate
i
to select a list item to delete. Press
u
.
•Edit Order
: Rotate
i
to select a list item to move, press
u
, rotate
i
to select
a new location, and press
u
again.
QRG
Navigation
Press
u
.
Page 129 of 252
128Navigation
Changing Your DestinationThere are several methods you can use to change the route destination.Find Nearest PlaceHENTER button (on map)
Find Nearest…
Search for the nearest place/landmark on
the map screen and set it as your
destination.
1.Rotate
i
to select
Find
Nearest…
. Press
u
.
2.Rotate
i
to select a category
type. Press
u
.
3.Rotate
i
to select a place.
4.Rotate
i
to set the place as a
destination or add to the destination list. Press
u
.
The system calculates the route. 2Calculating the Route
P. 90
1Find Nearest Point of Interestd
“Find Nearest…”
(on map screen)
The Find Nearest voice command is the fastest method of specifying a pl
ace/landmark as your
destination. Many kinds
of place/landmark can
be found. 2Find Place Commands
P. 237
QRG
Press
u
.
Page 130 of 252
129
Changing Your Destination
Selecting a Destination on the Map
Selecting a Destination on the MapSelect a new destination when en rout
e by selecting a location on the map.
1.Scroll the map to position the cursor over your desired destination, adjusting the map scale as necessary. Press
u
.
If the address displayed is not the desired location, press the CANCEL/BACK button and repeat the procedure.
2.Rotate
i
to select
OK
or
Set as
Dest.
(depending on the screen
displayed). Press
u
.
2Calculating the Route
P. 90
1Selecting a Destination on the MapIf there is more than one
icon or street under the
map cursor, you are prompted to select the item from a list.•Rotate
i
to select an item. Press
u.
•If you select
Map Icon
, rotate
i
to select a
place and press
u.
QRG
Navigation
Page 131 of 252
130
Changing Your Destination
Entering a New Destination
Navigation
3.Rotate
i
to select an option.
Press
u
.
The route is automatically recalculated and displayed on the map screen.
The following options are available: •Set as New Destination
: Sets the location as your new destination.
•Add to Dest. List
: Sets the location as a new waypoint.
Entering a New DestinationHMENU button (when en route)
Dest. MENU 1
or Dest. MENU 2
Enter a new destination using the Destination Menu screen even when you are
en route.
1.Enter a new destination. 2Entering a Destination
P. 68
After entering a new destination, the address is displayed on the Calculate Route screen.
2.Rotate
i
to select
OK
. Press
u
.
1Entering a New Destinationd
“Display Menu”
, d
“Display Navigation”
QRG
Page 132 of 252
131
Changing Your Destination
Entering a New Destination
3.Rotate
i
to select an option.
Press
u
.
The route is automatically recalculated and displayed on the map screen.
The following options are available: •Set as New Destination
: Sets the location as your new destination.
•Add to Dest. List
: Sets the location as a new waypoint.
QRG
Navigation
Page 133 of 252
132Navigation
Resuming Your TripStop your vehicle en route (e.g., to rest, st
op for gas, etc.), and then continue on
your route. If you did not complete your route, the Continue Trip screen is displayed when you restart your vehicle.
Rotate
i
to select
OK
. Press
u
.
You can continue on the
•Route Pref.
: Changes the route preferences (calculating method).
2Changing the Route Preference
P. 91
•View Routes
: Displays three different routes.
2Viewing the Routes
P. 92
•DESTINATION MAP
: Move
r to select
DESTINATION MAP
to display a map of
the destination. 2Viewing the Routes
P. 92
1Continuing Your TripThe Continue Trip screen has the same options as when you calculate a route. 2Calculating the Route
P. 90
To cancel your destination, press the CANCEL/ BACK button. Add to Address Book You can add the destination address to the address book. 2Adding an Address Book Entry
P. 37
Add to Dest. List You can add the address to
the Destination List.
2Editing the Destination List
P. 127
CallYou can place a phone ca
ll to the destination
phone number. 2Bluetooth® HandsFreeLink®
P. 174
QRG
same route.
Page 137 of 252
136Audio
Playing FM/AM RadioSelecting FM/AM Mode1.Press the FM/AM button.
Press the FM/AM button again, if necessary, to select the frequency band (AM, FM1, FM2).
2.Select a station using the buttons (P
reset, SCAN) or bars (SKIP, TUNE).
On the FM bands, you can also use
the CATEGORY bar and TITLE button to
select a station provided by the Radio Data System (RDS).
The band and frequency are displayed on the display.
Audio Screen ControlHAUDIO button (in FM/AM mode)Control the audio system through the navigation screen.
1.Move
e to select a frequency band
(AM
, FM1
, or
FM2
).
2.Rotate
i
to select a preset
station. Press
u
.
Press and hold
u
until a beep
sounds to store the current station in a preset button.
Move
r to select
AUDIO
MENU
.
2Audio Menu
P. 137
1Playing FM/AM Radiod
“Display audio screen”
You can control the radio using voice control commands. 2Radio Commands
P. 239
A visual guide helps
you operate the audio
system. 2System Controls
P. 4
2Basic Operation
P. 6
The ST indicator comes on the display for stereo FM broadcasts. Stereo re
production in AM is not
available. The radio can receive the complete AM and FM bands: AM band: 530 to 1710 kHz FM band: 87.7 to 107.9 MHz You can store six AM stati
ons and 12 FM stations
in the preset buttons. FM1 and FM2 let you store six stations each.
Stereo indicator
Frequency band
Preset stations
QRG
