2013 Acura ILX navigation system

88
XX
Calculating the Route
XChanging the Route Preference
Navigation
Changing the Route PreferenceChange the route preference by selecting minimum or maximum driving methods.
1.Rotate i to select an item. Press
u.
2.Rotate i to select MIN or MAX.
Press u.
X
Repeat step 1 and 2 as
necessary.
3.Move r to select OK.
Viewing the RoutesView three different routes to your destination.
Rotate i to select a route. Press u.
XThe travel distance and estimated
travel time is displayed for each
route.XThe system calculates and displays
the route line on the map screen. 2Route Line
P. 91
1Changing the Route Preference
The calculated route may be the shortest route or
the route you would choose. For safety reasons,
the system generally applies the following rules
to your route:•Shortcuts through residential areas are
avoided.•Right turns are favoured over left turns or U-
turns.•Time-restricted turns (turns prohibited at
certain times of the day) are not used.
Check the ferry schedule when the calculated
route includes ferry route.
1Viewing the Routes
It is not unusual for some calculated route
options to be identical.

89
XX
Calculating the Route
XCalculating the Route on the Destination Map
Navigation
Calculating the Route on the Destination MapCalculate the route from the map of the destination address.
Rotate i to select Calculate Route.
Press u.
XThe system calculates and displays
the route line on the map screen. 2Route Line
P. 91
1Calculating the Route on the Destination Map
d “Display Destination Map” (when en route)

90Navigation
Driving to Your DestinationThis section describes how to follow the route guidance to your destination and
choose the icons displayed on the map screen.Viewing the Route
After calculating the route to your
destination, the route is displayed on
the map screen. 2Map Screen Legend
P. 10
As you drive, the system tracks your
position on the map in real time and
provides guidance as you approach
each guidance point on the route.
■Map Screen
1Viewing the Route
d “Display Map”
You can change the map scale using voice
commands (e.g., say d “Display 3 km scale”).
2Map Scale Commands P. 219
You can also change the map scale by rotating
i.
You can control the icons displayed on the map
screen using voice commands (e.g., say d
“Display post office”).
2Map Display Commands P. 218
You can obtain information about the route
using voice commands (e.g., say d “How long
to the destination?”).
2Route Commands P. 220
You can display the next guidance point on the
map screen by saying d “Display Map Guide”
(when en route).
If you scroll the map while en route, the time and
distance to destination indicators are replaced
with an indicator showing distance from the
current vehicle position.
The map screen can be viewed in single-screen or
split-screen mode.
2Guidance Mode P. 100

92
XX
Driving to Your Destination
XViewing the Route
Navigation
•If Unverified Area Routing is ON,
the route line changes to a dashed
blue-pink line to indicate that the
route line uses unverified streets.
If you leave the calculated route, the system automatically recalculates a route to the
desired destination based on your current location and direction.
2Rerouting
P. 49
Blue-pink route line
■Deviating From the Planned Route
1Deviating From the Planned Route
If Rerouting is set to MANUAL and you go off
route, the system waits for you to manually
initiate recalculation. Rotate i to select
Recalculation and press u.
2Rerouting P. 49

93
XX
Driving to Your Destination
XViewing the Route
Navigation
If you leave all mapped (digitised) roads, the system automatically starts displaying a
series of dots (breadcrumbs) to track the path you are taking. If needed, you can
follow the dots back to the mapped road you originally left. 2Off-road Tracking
P. 58
■Driving Off-road
1Driving Off-road
A message “Not on a digitized road” may appear
when you drive 800 m away from a mapped
road.
Breadcrumbs may occasionally be displayed in
urban areas, such as large parking lots in
shopping malls, in new subdivisions where the
roads are not yet in the database, or in areas
where a GPS signal is unavailable, such as in a
parking garage.
Off-road tracking breadcrumbs are limited to
approximately 240 km. Breadcrumbs at the
beginning of the trail are deleted if you exceed
that distance.
Breadcrumbs are displayed only at 80, 200, 400,
and 800 m map scales.

98
XX
Map Menu
XGuidance Menu
Navigation
HENTER button (on map)
X Guidance Menu
X Directions
Display a list of the guidance points on your route for your confirmation.
1.Rotate i to select a guidance
point from the list. Press u.X
The system displays a map of
the guidance point.
2.Press u to select RETURN or press
the CANCEL button to return to
the previous screen.
■Directions
1Directions
Guidance points with exit information are
indicated by a (highway exit information)
icon. Move y to select Exit Info to display the
exit information.
2Highway Exit Information P. 99
The route guidance information is automatically
deleted when you reach your destination.

100
XX
Map Menu
XGuidance Menu
Navigation
HENTER button (on map)
X Guidance Menu
X Guidance Mode
Select the display mode during route guidance: single-screen mode (default) or split-
screen mode.
Rotate i to select an option. Press
u.
The following options are available:
•Single Screen: Displays the map and guidance screens on separate screens.
■Guidance Mode
1Guidance Mode
The guidance mode can also be selected from
the System Setup menu.
2Routing & Guidance P. 48
Map screenPress the
MAP/GUIDE
button
Guidance screen

105
XX
Map Menu
XMap Information
Navigation
HENTER button (on map)
X Map Information
Select the map orientation.
Rotate i to select North-up or
Heading-up. Press u.
XThe system changes the map
orientation and displays the map
screen.
The following options are available:
•North-up: Displays the map with North always pointing up.
•Heading-up: Displays the map so that the direction you are travelling is always
pointing up.
■Map Orientation
1Map Orientation
d “Display Heading-up” (on map screen), d
“Display North-up” (on map screen)
The red arrow in the symbol always points North.
On scales greater than 1.6 km, North-up mode is
always used.
Continued