2013.5 Citroen DS4 RHD wheel

41Monitoring



Press thumb wheel B
for access to the
main menu and select one of the following
functions:


- "Vehicle parameters",

- "Display adjustment",

- "Choice of sounds".


Turn the thumb wheel B
to move around in
the instrument panel central screen.


Press the thumb wheel B
again to confirm
the selection. This menu is used to activate or deactivate
certain driving and comfort systems, classified
in different categories:


- "Access to the vehicle" (see "Access"
section):


●
"Plip action" (Selective unlocking of the
driver's door),

●
"Unlocking only boot" (Selective
unlocking of the boot).



- "Driving assistance":


●
"Parking brake automatic" (Automatic
electric parking brake; see "Driving"
section),

●
"Rear wipe in reverse gear" (Rear wiper
coupled to reverse gear; see " Visibility"
section),

●
"Speeds memorised" (Memorising
speeds; see "Driving" section).


- " Vehicle lighting" (see " Visibility" section):


●
"Directional headlamps" (Main/additional
directional lighting),

●
"Daytime lights" (Daytime running
lamps).



- "Interior lighting" (see " Visibility" section):


●
"Follow-me-home" (Automatic timed
operation of headlamps),

●
" Welcome lighting" (Interior/exterior
welcome lighting).




Vehicle parameters

Main menu

The main menu and its associated
functions can only be accessed when
stationary.
A message appears in the instrument
panel central screen, above a certain
speed threshold, indicating that the
main menu cannot be displayed.

49Monitoring

Power steering
fixed. The power steering has a fault. Drive carefully at reduced speed.
Have it checked by a CITROËN dealer or a qualified
workshop.




Under-inflation


fixed. The pressure in one or more wheels
is too low. Check the pressure of the tyres as soon as possible.
This check should preferably be carried out when the
tyres are cold.

+
flashing then fixed,
accompanied by the
Ser vice warning lamp. The tyre pressure monitoring system
has a fault or no sensor is detected
on one of the wheels. Under-inflation detection is not assured.
Have the system checked by a CITROËN dealer or a
qualified workshop.




Directional
headlamps


flashing. The directional headlamps system
has a fault. Have it checked by a CITROËN dealer or a qualified
workshop.

Warning lamp



is on



Cause



Action/Observations






Foot on the brake
pedal


fixed. The brake pedal is not pressed. With an electronic gearbox, press the brake pedal to
start the engine (lever in position N
).
If you wish to release the parking brake without
pressing the brake pedal, this warning lamp will remain
on.

flashing. With an electronic gearbox, if you hold
the vehicle on a rising incline using
the accelerator for too long, the clutch
overheats. Use the brake pedal and/or the electric parking brake.




Airbags


temporarily. This lamp comes on for a few
seconds when you turn on the
ignition, then goes off. This lamp should go off when the engine is started.
If it does not go off, contact a CITROËN dealer or a
qualified workshop.

fixed. One of the airbag or seat belt
pretensioner systems has a fault. Have it checked by a CITROËN dealer or a qualified
workshop.

59Monitoring









Lighting dimmer

Permits manual adjustment of the brightness of
the instruments and controls in relation to the
exterior brightness. Only operates when the
vehicle lighting is on in night mode.

Activation




Press button A
to change the brightness of
the instruments and controls.


When the lighting reaches the minimum
setting, release the button, then press
again to increase it.
or



When the lighting reaches the maximum
setting, release the button, then press
again to reduce it.


When the lighting reaches the level of
brightness required, release the button.
This indicator and the lighting
value appear in the middle of the
instrument panel during adjustment
to show the lighting level compared
to the 16 levels available. You can also modify the level of lighting by
turning the thumb wheel B
, located on the left
of the steering wheel:



upwards; to reduce the level,


downwards; to increase the level.



Deactivation

When the vehicle lighting is off, or in day mode
(daytime running lamps on), pressing the button
or turning the thumb wheel does not have any
effect.

61Monitoring






Customising the polyphonic
sounds
This menu allows you to choose a family of
polyphonic sounds from the four available.
These sounds are grouped together in a family
and are adapted to suit the situation and
context (alert, confirmation, rejection, direction
indicators, lighting left on, key in ignition...).

For the type 2 customisable
colour instrument



Press the thumb wheel for access to the
main menu.


Select the "Choice of sounds" line and
confirm.


Select the desired family of sounds and
confirm.


Save the modifications by confirming "OK".

For safety reasons, the driver must
only carry out these operation when
stationary. For safety reasons, these operations
are only possible when stationary.


For the type 1 customisable
colour instrument panel



Press the "MENU"
button for access to the
main menu.


Select the "Personalisation-configuration"
menu and confirm.


Select the "Choice of sounds" line and
confirm.


Select the desired family of sounds and
confirm.


Save the modifications by confirming "OK".

Type 2 central instrument panel screen


Information displays



- Display of instantaneous information with:


●
the range,

●
the current fuel consumption,

●
Stop & Start time counter,



- Display of trip "1"
with:


●
the distance travelled,

●
the average fuel consumption,

●
the average speed,
for the first trip.



- Display of trip "2"
with:


●
the distance travelled,

●
the average fuel consumption,

●
the average speed,
for the second trip.



●
information on the current audio source,

●
black screen,

●
navigation-guidance messages.



Press the button, located at the end of the
wiper stalk

or


turn the thumb wheel, located on the left of
the steering wheel
,
to display the following information in turn:


●
reminder of the speed,

●
instantaneous information,

●
trip "1"
,

●
trip "2"
,

73Multifunction screens

Trip zero reset




When the required trip is displayed, press
the thumb wheel located on the left of the
steering wheel
or the button on the end of
the wiper stalk
for more than two seconds.
Trips "1"
and "2"
are independent but their use
is identical.
For example, trip "1"
can be used for daily
figures and trip "2"
for monthly figures.

93Comfort
These have one position for use (up) and a
stowed position (down).
They can also be removed.
To remove a head restraint:



release the backrest using control 1
,


tilt the backrest 2
slightly forwards,


pull the head restraint upwards to the stop,


then, press the lug A
.


Rear head restraints

Never drive with the head restraints
removed; they must be in place and
correctly adjusted.









Steering wheel adjustment





When stationary
, pull the control lever to
release the adjustment mechanism.


Adjust the height and reach to suit your
driving position.


Push the control lever to lock the
adjustment mechanism.
As a safety precaution, these
operations should only be carried out
while the vehicle is stationary.

111Access
Deactivate the interior volumetric and anti-tilt
monitoring to avoid unwanted triggering of the
alarm in certain cases such as:


- leaving a pet in the vehicle,

- leaving a window partially open,

- washing your vehicle,

- changing a wheel,

- having your vehicle towed,

- transpor t by sea.


Locking the vehicle
with exterior perimeter
monitoring only

Deactivation of the interior
volumetric and anti-tilt
monitoring



Switch off the ignition.


Within ten seconds, press the button until
the indicator lamp is on continuously.


Get out of the vehicle.


Press the locking button on the remote
control immediately.
The exterior perimeter monitoring alone is
activated: the indicator lamp in the button
flashes once per second. To be effective, this deactivation must
be carried out each time the ignition is
switched off.


Reactivation of the interior
volumetric and anti-tilt
monitoring



Press the unlocking button on the remote
control to deactivate the exterior perimeter
monitoring.


Press the locking button on the remote
control to activate all the monitoring
functions.
The indicator lamp in the button again flashes
once per second.