2013.5 Citroen DS4 RHD glove box

15Familiarisation
Instruments and controls




1.
Steering wheel adjustment control.

2.
Steering mounted control paddles for the
electronic gearbox.

3.
Lighting and direction indicator control
stalk.

4.
Speaker (tweeter).

5.
Windscreen demisting vent.

6.
Sunshine sensor.

7.
Passenger's airbag.

8.
Glove box / Audio/video sockets /
Passenger's airbag deactivation switch /
Fusebox.

9.
Bonnet release.

10.
Heated seat control.

11.
Lumbar massage control.

12 .
Electric parking brake.

13.
Gear lever for a manual gearbox or
selector lever for an electronic or automatic
gearbox.

14 .
Large multifunctional storage unit.

Passenger safety



1.
Open the glove box.

2.
Insert the key.

3.
Select the position:

"OFF"
(deactivation), with "rear facing" child seat, "ON"
(activation), with front passenger or
"for wards facing" child seat.

4.
Remove the key keeping the switch in the
new position.


Passenger's front airbag


187



A.
Front left seat belt not fastened /
unfastened warning lamp.

B.
Front right seat belt not fastened /
unfastened warning lamp.

C.
Rear right seat belt unfastened warning
lamp.

D.
Rear centre seat belt unfastened warning
lamp.

E.
Rear left seat belt unfastened warning
lamp.

F.
Passenger's front airbag deactivated
warning lamp.

G.
Passenger's front airbag activated warning
lamp.


Seat belts and passenger's
front airbag

181, 187

Lighting dimmer


fixed. The lighting dimmer is making an
adjustment. You can adjust the level of illumination of the
instruments between 1 and 16.



Passenger's
airbag system
fixed in the seat belt
and passenger's front
airbag warning lamps
display.
The control switch, located in the glove
box, has been placed in the "ON"
position.
The passenger's front airbag is activated.
In this case, do not install a "rear facing"
child seat. Move the control switch to the "OFF"
position
to deactivate the passenger's front airbag.
In this case, you can install a "rear facing" child seat.





Automatic wiping


fixed. The wiper control is pushed
downwards. Automatic front wiping is activated.
To deactivate automatic wiping, operate the control
stalk downwards or put the stalk into another position.

Warning lamp



is on



Cause



Action/Observations




Stop & Start


fixed. When the vehicle stops (red lights,
traffic jams,...) the Stop & Start
system has put the engine into STOP
mode. The warning lamp goes off and the engine restarts
automatically in START mode, as soon as you want to
move off.

flashes for a few
seconds, then goes
off. STOP mode is temporarily
unavailable.
or
START mode is invoked
automatically. For more information on special cases with STOP
mode and START mode, refer to the "Stop & Start"
section.


Parking space
sensors


fixed. The parking space sensors function
is selected. To start measurement, operate the direction indicator
on the side of the space to be measured, and do not
exceed 12 mph (20 km/h). A message is displayed
once the measurement has been completed.

53Monitoring




Passenger's
airbag system


fixed in the instrument
panel and/or seat belt
and front passenger's
airbag warning lamps
display. The control switch, located in the
glove box, is set to the OFF
position.
The passenger's front airbag is
deactivated. Set the control to the "ON"
position to activate
the passenger's front airbag.
In this case, do not fit a child seat in the rear-facing
position.

Warning lamp



is on



Cause



Action/Observations













Deactivation indicator lamps

If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally.
This is may be accompanied by an audible signal and a message on the multifunction screen.

Interior fi ttings



1.
Sun visor

(see "Familiarisation - § Panoramic
windscreen)

2.
Ticket/card holder


3.
Storage compartments


4.
Illuminated
glove box

(see details on a following page)

5.
Door pocket

s


6.
USB por t / Auxiliar y socket

(see details on a following page)

7.
Cigarette lighter / 12 V accessor y
socket

(see details on following pages)

8.
Por table ashtray

(see details on following pages)

9.
Centre armrest with storage

(see details on a following page)

145Fittings











Illuminated glove
box

Its lid has locations for storing a pen, a pair of
glasses, tokens, maps, a cup...



To open the glove box, raise the handle.
It is lit when the lid is opened.
It houses the front passenger airbag
deactivation switch A
.
If the vehicle is fitted with air conditioning, it
provides access to the ventilation nozzle B
,
distributing the same cooled air as the vents in
the passenger compartment.
It gives access to the dashboard fusebox (see
"Practical information - § Changing a fuse").






Portable ashtray





Pull the cover to open the ashtray.


To empty it, remove the ashtray by pulling it
upwards.
To avoid any problem of inter ference
or risk of overturning, do not place the
ashtray near the gear lever.

Front airbags

System which protects the driver and front
passenger in the event of a serious front impact
in order to limit the risk of injury to the head and
thorax.
The driver's airbag is fitted in the centre of the
steering wheel; the front passenger's airbag is
fitted in the dashboard above the glove box.
Deployment

The airbags are deployed, except the
passenger's front airbag if it is deactivated, in
the event of a serious front impact to all or part
of the front impact zone A
, in the longitudinal
centreline of the vehicle on a horizontal plane
and directed from the front to the rear of the
vehicle.
The front airbag inflates between the thorax
and head of the front occupant of the vehicle
and the steering wheel, driver's side, and the
dashboard, passenger's side to cushion their
for ward movement.

253Practical information














Changing a wheel
Procedure for changing a faulty wheel for the spare wheel using the tools provided with the vehicle.
The tools are installed in the boot under the
floor.
To gain access to them:



open the boot,


raise the floor,


secure it by hooking its cord on the hook
on the rear shelf support,


with a standard size spare wheel, unclip
and remove the box in the middle of the
wheel containing the tools,
or


with a "space-saver" spare wheel; lift the
wheel at the rear towards you for access to
the storage box containing the tools.


Access to the tools


List of tools

All of these tools are specific to your vehicle.
Do not use them for other purposes.

Wheel with trim


When removing the wheel
, detach the
trim first using the wheelbrace 1
pulling
at the valve passage hole.

When refitting the wheel
, refit the trim
starting by placing its notch facing the
valve and press around its edge with
the palm of your hand.

3.
"Bolt cover" tool.
For removing the bolt protectors (covers)
on alloy wheels.

4.
Socket for the security bolts (located in the
glove box).
For adapting the wheelbrace to the special
"security" bolts.


1.
Wheelbrace.
For removing the wheel trim and the wheel
fixing bolts.

2.
Jack with integral handle.
For raising the vehicle.