2013.5 Citroen DS4 RHD menu

Defi ne the vehicle parameters



- "Driving assistance":


●
"Parking brake automatic" (Automatic
electric parking brake; see the "Driving"
section),

●
"Rear wipe in reverse gear" (Rear
wiper coupled to reverse gear; see the
" Visibility" section),

●
"Speeds memorised" (Memorising
speeds; see the "Driving" section).



- " Vehicle lighting" (see the " Visibility"
section):


●
"Directional headlamps" (Main /
additional directional lighting),

●
"Daytime lights" (Daytime running
lamps).



- "Interior lighting" (see the " Visibility"
section:


●
"Follow-me-home headlamps"
(Automatic operation of headlamps after
switching off the ignition),

●
" Welcome lighting" (Exterior and interior
welcome lighting).
For example: setting of the duration of the
"follow-me-home" lighting



Press the " 
" or " 
" buttons, to select the
"Define the vehicle parameters" menu,
then the " OK
" button.


Press the " 
" or " 
" buttons to select the
"Interior lighting" line, then the "OK"
button;
then follow the same procedure to select the
"Follow-me-home headlamps" line. This menu allows you to activate or deactivate
the following equipment, classified in different
categories:


- "Access to the vehicle" (see the "Access"
section):


●
"Plip action" (Selective unlocking of the
driver's door),

●
"Unlocking boot only" (Selective
unlocking of the boot).



"Personalisation-
configuration" menu
This menu gives access to the following
functions:


- "Define the vehicle parameters",

- "Choice of language",

- "Display configuration",

- "Choice of sounds".

67Multifunction screens


Press the " 
" or " 
" buttons to set the
value required (15, 30 or 60 seconds), then
press the "OK"
button to confirm.


Choice of language

Once this menu has been selected, you can
choose the language used by the display from
a pre-defined list.


Display confi guration

This menu gives access to the following
settings:


- "Choice of units",

- "Date and time adjustment",

- "Display parameters",

- "Brightness".


Choice of sounds

This menu allows you to choose a family of
polyphonic sounds from the four available.
These sounds are grouped together in a family
and are adapted to suit the situation and
context (alert, confirmation, rejection, direction
indicators, lighting left on, key in ignition...).

For safety reasons, configuration of the
multifunction screen by the driver must
only be done when stationary.

Press the " 
" or " 
" buttons, then
the "OK"
button to select the "OK"
box
and confirm or press the "Back"
button to
cancel.

Adjusting the date and time




Press the " 
" or " 
" button to display
the "Display configuration" menu, then
press "OK"
.


Press the " 
" or " 
" button to select the
"Date and time adjustment" button, then
press "OK"
.


Press the " 
" or " 
" button to select
the setting to modify. Confirm by
pressing "OK"
, then modify the setting and
confirm again to save the modification.


Adjust the settings one by one, confirming
with the "OK"
button.


Press the " 
" or " 
" button, then the "OK"

button to select the "OK"
box and confirm
or the "Back"
button to cancel.

Colour screen

It displays the following information
automatically and directly:


- time,

- date,

- altitude,

- ambient temperature (the value displayed
flashes if there is a risk of ice),

- parking sensor information,

- parking space measurement,

- audio functions,

- directory and telephone information,

- satellite navigation system information.



Displays in the screen

From the navigation system control panel, to
select one of the applications:



press the dedicated "RADIO"
, "MUSIC"
,
"NAV"
, "TRAFFIC"
, "PHONE"
or
"SETUP"
button for access to the
corresponding menu,


turn the dial A
to select a function, an item
in a list,


press button B
to confirm the selection,
or


press the "ESC"
button to abandon the
current operation and return to the previous
display.


Controls

For more information on these applications,
refer to the "Audio and Telematics" section.

69Multifunction screens

"SETUP" menu





Press the "SETUP"
button for access to its
menu. You can choose from the following
functions:


- "Display configuration",

- " Voice synthesis".




Display confi guration

This menu is used to set the brightness of the
screen, the screen colour scheme and the date
and time.

Voice synthesis

This menu is used to adjust the volume for
guidance messages and to select the type of
voice (male or female).
For safety reasons, configuration of the
multifunction screen by the driver must
only be done when stationary.


Setting the date and time



- Press SETUP
.

- Select "Display configuration" and confirm.

- Select "Set date and time" and confirm.
Select "Minute adjustment via GPS" to have the
minutes set automatically by satellite reception.


- Select the setting to modify. Confirm it by
pressing OK
, then modify the setting and
confirm again to save the modification.

- Adjust the settings one by one.

- Select "OK"
in the screen then confirm to
save the setting.

Remote control key
System which permits central unlocking or locking of the vehicle using the door lock or from a distance. It is also used to locate and start the vehicle,
as well as providing protection against theft.









Unlocking the vehicle


Unfolding the key




Press this button to unfold the key.



Complete unlocking using the
remote control

Selective unlocking using the
remote control



Press the open padlock to unlock
the vehicle completely.




Press the open padlock once to
unlock the driver's door only.


Press the open padlock again to unlock the
other doors and the boot.



Opening the windows using the
remote control



Maintain the press on the open
padlock until the desired position
is obtained. The windows stop as
soon as you release the button.



Programming the unlocking

The complete or selective door
unlocking parameter is set via the
vehicle configuration menu.

101Access

Unlocking using the key




Turn the key for wards in the driver's door
lock to unlock the vehicle completely.



Selective unlocking of the boot




Press the central button on the
remote control to unlock the
boot. The doors remain locked.
If selective unlocking of the boot is deactivated,
pressing this button also unlocks the doors.

Programming the unlocking

The complete or selective boot
unlocking parameter is set via the
vehicle configuration menu.
Selective unlocking of the boot is
activated by default.

Don't forget to lock the boot again by
pressing the closed padlock button.
The direction indicators flash for a few
seconds.
The spotlamps in the door mirrors
come on.
Depending on version, the door mirrors
unfold, the welcome lighting comes on,
the alarm is deactivated.

125Visibility


Model without AUTO lighting



Model with AUTO lighting



Manual controls

The lighting is controlled directly by the driver
by means of the ring A
and the stalk B
.





Sidelamps (lighting signature).
Automatic illumination of headlamps.

B.
Stalk for switching headlamps: pull the stalk
towards you to switch the lighting between
dipped and main beam headlamps.
In the lamps off and sidelamps modes, the
driver can switch on the main beam headlamps
temporarily ("headlamp flash") by maintaining a
pull on the stalk.
A.
Main lighting mode selection ring: turn it
to position the symbol required facing the
mark.
Lighting off / daytime running lamps.
Sidelamps.

Dipped headlamps or main beam headlamps.


Displays

Illumination of the corresponding indicator
lamp in the instrument panel confirms that the
lighting selected is on. Daytime lighting, compulsory in certain
countries, which comes on automatically when
the engine is started making the vehicle more
visible to other users.

This function is assured:


- in countries where it is imposed by
regulations,
by illumination of the dipped beam
headlamps associated with illumination of
the sidelamps and number plate lamps; this
function cannot be deactivated.

- for other countries where it is provided,
by illumination of dedicated lamps; this
function can be activated or deactivated via
the vehicle configuration menu.







Daytime running lamps

The lighting control must be in position "0"
or
"AUTO "
(day mode).

When a low level of ambient light is detected
by a sunshine sensor, the number plate
lamps, sidelamps and dipped beam headlamps
are switched on automatically, without any
action on the part of the driver. They can also
come on if rain is detected, at the same time as
automatic operation of the windscreen wipers.
As soon as the brightness returns to a
sufficient level or after the windscreen wipers
are switched off, the lamps are switched off
automatically.












Automatic illumination of
headlamps

Activation




Turn the ring to the "AUTO "
position. The
activation of the function is accompanied
by the display of a message in the screen.



Deactivation




Turn the ring to another position.
Deactivation of the function is accompanied
by the display of a message in the screen.



Automatic "guide- me-
home" lighting

Operating fault

In the event of a malfunction of
the sunshine sensor, the lighting
comes on, this warning lamp is
displayed in the instrument panel and/or a
message appears in the screen, accompanied
by an audible signal.
Contact a CITROËN dealer or a qualified
workshop. In fog or snow, the sunshine sensor
may detect sufficient light. In this
case, the lighting will not come on
automatically.
Do not cover the sunshine sensor,
coupled with the rain sensor and
located in the centre of the windscreen
behind the rear view mirror; the
associated functions would no longer
be controlled.

When the automatic illumination of headlamps
function is activated, under low ambient
light the dipped beams headlamps come on
automatically when the ignition is switched off.


Programming

Activation or deactivation, as well
as the duration of the guide-me-
home lighting, is set in the vehicle
configuration menu.