2013.5 Citroen DS4 RHD transmission


On the front bumper, unclip the cover by
pressing at the bottom.


Screw the towing eye in fully.


Install the towing bar.


On the rear bumper, unclip the cover by
pressing at the bottom.


Screw the towing eye in fully.


Install the towing bar.


Switch on the hazard warning lamps on
both vehicles.


Move off gently, drive slowly and for a short
distance.



Towing your vehicle
Towing another vehicle



Place the gear lever in neutral
(position N
on an electronic or
automatic gearbox).
Failure to obser ve this instruction
could result in damage to
certain components (braking,
transmission...) and the absence
of braking assistance the next time
the engine is started.


Unlock the steering by turning the key
in the ignition one notch and release the
parking brake.


Switch on the hazard warning lamps on
both vehicles.


Move off gently, drive slowly and for a short
distance.

04 NAVIGATION - GUIDANCE


Press NAV
to display the
" Navigation - guidance
" menu.







Navigation voice synthesis


Select " Guidance options
" and confi rm.
Adjusting the volume / Deactivation

Select " Set speech synthesis
" and
confi rm.
Select the volume graph and confi rm.

Select " Deactivate
" to deactivate voice messages.

Select " OK
" and press the dial to
confi rm.

Adjust the volume to the desired level
and confi rm.
The volume of messages can be adjusted during the transmission
of the message using the volume adjustment control.

The volume setting of guidance messages is also accessible via
the " SETUP
" / " Voice synthesis
" menu.

05 TRAFFIC INFORMATION







Principal TMC symbols


Red and yellow triangle: traffi c information, for example:
Black and blue triangle: general information, for example:
Weather reports
Modifi ed signage
Risk of explosion Traffi c reports
Narrow carriageway
Road closed Wind
Slippery surface
Demonstration Fog
Accident
Danger Parking
Delay
No entry Snow / ice
Roadworks
Traffi c jam








Receiving TA messages


The TA (Traffi c Announcement) function gives priority to TA alert
messages. To operate, this function needs good reception of a
radio station transmitting this type of message. When a traffi c report
is transmitted, the current audio source (Radio, CD, USB, ...) is
interrupted automatically to play the TA message. Normal playback
of the audio source resumes at the end of the transmission of the
message.

Press RADIO
to display the " FM / AM
band
" menu.

Select " Guidance options
" then
confi rm.

Activate or deactivate " TA
" then confi rm.

The volume setting for TA messages can be adjusted only during the
transmission of this type of alert.

Activate or deactivate the function at any time by pressing
the button.
During a message, press the button to interrupt it.

04

RDS, if displayed, enables you to continue listening to the same station
by automatic retuning to alternative frequencies. However, in certain
conditions, coverage of an RDS station may not be assured throughout
the country as radio stations do not cover 100 % of the territory. This
explains the loss of reception of the station during a journey.


AUDIO


RDS





Receiving TA messages


The TA (Traffi c Announcement) function gives priority to TA alert
messages. To operate, this function needs good reception of a
radio station transmitting this type of message. When a traffi c
report is transmitted, the current audio source (Radio, CD,
USB, ...) is interrupted automatically to play the TA message.
Normal playback of the audio source resumes at the end of the
transmission of the message.

Press TA INFO
to activate or deactivate
the reception of traffi c messages.


When the radio is displayed on the
screen, press OK
to display the
contextual menu.

Select " RDS
" and confi rm to save.
" RDS
" is displayed in the screen.

361
04

Make a long press on TA INFO
to
display the list of categories.

Receiving INFO messages

The INFO function gives priority to TA alert messages. To be
active, this function needs good reception of a radio station that
transmits this type of message. When a message is transmitted,
the current audio source (Radio, CD, USB, ...) is interrupted
automatically to receive the INFO message. Normal play resumes
at the end of the message transmission.
Select or deselect categories to activate
or deactivate the reception of the
corresponding messages.


AUDIO


Radio text is information transmitted by the radio station related to the
current programme or song.

With the radio displayed on the screen,
press OK
to display the contextual
menu.

Select " RadioText (TXT) display
" and
confi rm OK
to save.



Display RADIO TEXT


Screen C

369
04 AUDIO







Streaming - Playing audio files via
Bluetooth

Depending on the compatibility of the phone

Pair/connect the telephone: see the "USING
THE TELEPHONE" section.
Streaming allows music fi les on a telephone to be heard via the
vehicle's speakers.
The telephone must support the appropriate bluetooth profi les
(Profi les A2DP / AVRCP).

Activate the streaming source by pressing SOURCE
or
SRC
. Control of playback is via the audio system. The
contextual information can be displayed in the screen.

In certain cases, playing of the audio fi les must be initiated from the
telephone.

The audio quality depends on the quality of the transmission from
the telephone.



Play mode


The play modes available are:


- Normal: the tracks are played in order, depending on the
classifi cation of the selected fi les.

- Random: the tracks in an album or folder are played in a
random order.

- Random all: all of the tracks saved in the media are played in
random order.

- Repeat: the tracks played are only those from the current
album or folder.


Press OK
for access to the contextual
menu.
or
Press MENU
.

Select " Multimedia
" and confi rm.

Select " Media parameters
" and
confi rm.

Select " Read mode
" and confi rm.

Select the desired play mode and
confi rm OK
to save the modifi cations.