1
2
3
4
5
6
7
8
9
10
INSTRUMENT \fND CONTRO\b FUNCTIONS
4-5
EAUB1501
Multi-function display
1. Tachomete\f
2. Spee\bomete\f
3. O\bomete\f
4. T\fipmete\fs/Fuel \fese\fve t\fipmete\f
5. Clock
6. Fuel mete\f
7. “RESET” button
8. “SELECT” button
EWA12311
W\fRNING0
Be sure to stop the vehicle before
making any setting changes to the
multi-function displ\ ay.
The multi-function \bisplay is equippe\b
with the following:
●a spee\bomete\f (which shows the
\fi\bing spee\b)
●a \bigital tachomete\f (which shows
engine \f/min)
●an o\bomete\f (which shows the to-
tal \bistance t\favele\b)
●two t\fipmete\fs (which show the
\bistance t\favele\b since they we\fe
last set to ze\fo)
●a fuel \fese\fve t\fipmete\f (which
shows the \bistance t\favele\b since
the bottom segment of the fuel
mete\f sta\fte\b flashing)
●a clock
●a fuel mete\f
●a self-\biagnosis \bevice
TIP
●Be su\fe to tu\fn the key to "ON"
befo\fe using the "SELECT" an\b
"RESET" buttons.
●Fo\f the U.K. only: To switch the
spee\bomete\f an\b o\bome-
te\f/t\fipmete\f \bisplays between
kilomete\fs an\b miles, push the
"SELECT" an\b "RESET" buttons
togethe\f an\b tu\fn the key to "ON".
When the \bigits sta\ft flashing,
push the "SELECT" button to
choose kilomete\fs o\f \tmiles.
XT660Z 04-04 ING-AUS:MY03 01-03 ING 11-05-2009 9:54 Pagina 4-5
1
2
3
4
5
6
7
8
9
10
INSTRUMENT \fND CONTRO\b FUNCTIONS
4-7
Clock mode
1. Clock
2. “SELECT” b\ftton
3. “\bESET” b\ftton
TIP
The clock is displayed even when the
key is t\frned to "OFF".
To set the clock:
1. P\fsh the "SELECT" b\ftton for atleast fo\fr seconds.
2. When the ho\fr digits start flash- ing, p\fsh the "\bESET" b\ftton to
set the ho\frs.
3. P\fsh the "SELECT" b\ftton, and the min\fte digits will start flashing.
4. P\fsh the "\bESET" b\ftton to set the min\ftes.
5. P\fsh the "SELECT" b\ftton and then release it to \bstart the clock.
Fuel meter
1. F\fel meter
With the key in the "ON" position, the
f\fel meter indicates the amo\fnt of f\fel
in the f\fel tank. When the key is t\frned
to "ON", all of the display segments of
the f\fel meter will appear one after the
other and then disappear in order to
test the electrical circ\fit. The display
segments of the f\fel meter disappear
towards "E" (Empty) as the f\fel level
decreases. When only one segment is
left near "E" (Empty), ref\fel as soon
as possible.
TIP
This f\fel meter is eq\fipped with a self-
diagnosis system. If the electrical cir-
c\fit is defective, all the segments will
start flashing. If this occ\frs, have a
Yamaha dealer check the electrical cir-
c\fit.
XT660Z 04-04 ING-AUS:MY03 01-03 ING 11-05-2009 9:54 Pagina 4-7
