2012 YAMAHA XT660Z ignition

TABLE OF CONTENTS
LOCATION OF IMPORTANT LABELS...1-1
SAFETY INFORMATION ..................\r...2-1
Be a Responsible Owner ..................\r2-1
\fafe riding ..................\r..................\r.....2-1
\brotective apparel ..................\r...........2-2
Avoid Carbon Monoxide \boisoning ...2-2
Loading ..................\r..................\r.........2-3
Genuine Yamaha Accessories ..........2-3
Aftermarket \barts, Accessories, and Modifications ..................\r.....2-4
Aftermarket Tires and Rims ..............2-4
DESCRIPTION ..................\r..................\r.3-1
Left view ..................\r..................\r........3-1
Right view ..................\r..................\r.....3-2
Controls and instruments ..................\r3-3
INSTRUMENT AND CONTROL
FUNCTIONS ..................\r..................\r....4-1
Immobilizer system ..................\r.........4-1
Main switch/steering lock ..................\r4-2
Indicator and warning lights ..............4-3
Multi-function display ..................\r......4-5
Tachometer ..................\r..................\r...4-6
Tripmeter and tachometer modes .....4-6
Clock mode ..................\r..................\r...4-7
Fuel meter ..................\r..................\r.....4-7
\felf-diagnosis devices ..................\r....4-7 Handlebar switches ..................\r.........4-9
Clutch lever ..................\r..................\r.4-10
\fhift pedal ..................\r..................\r...4-10
Brake lever ..................\r..................\r..4-11
Brake pedal ..................\r..................\r.4-11
Fuel tank cap ..................\r................4-\r11
Fuel ..................\r..................\r.............4-12
Fuel tank breather hose ..................\r4-13
Catalytic converter ..................\r........4-13
\feat ..................\r..................\r.............4-14
Adjusting the front fork ..................\r..4-15
Adjusting the shock absorber
assembly ..................\r................4-\r16
\fidestand ..................\r..................\r....4-17
Ignition circuit cut-off system ..........4-17
FOR YOUR SAFETY -
PRE-OPERATION C\fECKS ...............5-1\r
\bre-operation check list ..................\r..5-2
OPERATION AND IMPORTANT
RIDING POINTS ..................\r................6-\r1
\ftarting the engine..................\r..........6-1
\fhifting ..................\r..................\r..........6-2
Tips for reducing fuel consumption ...6-3
Engine break-in ..................\r...............6-3\r
\barking ..................\r..................\r..........6-4 PERIODIC MAINTENANCE AND
ADJUSTMENT
..................\r..................\r.7-1
Owner’s tool kit ..................\r...............7-1\r
\beriodic maintenance chart for the emission control system.......7-2
General maintenance and lubrication chart ..................\r7-3
Removing and installing the cowling and panels ..............7-8
Checking the spark plug ..................\r.7-8
Engine oil and oil filter element.........7-9
Coolant ..................\r..................\r........7-12
Replacing the air filter element and cleaning the check hose ...7-14
Checking the engine idling speed ...7-15
Checking the throttle cable free play ..................\r.................7\r-16
Valve clearance ..................\r.............7-16
Tires ..................\r..................\r............7-16
\fpoke wheels..................\r................7-\r19
Adjusting the clutch lever free play ...7-20
Checking the front and rear brake pads ..................\r.............7-21
Checking the brake fluid level .........7-22
Changing the brake fluid .................7\r-23
Drive chain slack ..................\r...........7-23
Cleaning and lubricating the drive chain ..................\r........7-25
XT660Z 01-03 ING-AUS:AUSTRALIA 11-05-2009 9:57 Pagina 6

FOR YOUR SAFETY – PRE-OPERATION CHECKS
5-4
1
\f
3
4
5
\b
7
8
9
10
ITEM
Instruments, lights,
signals and switches
Sidestand
switch CHECKS
 Check operation.
 Correct if nece\f\fary.
 Check operation of ignition c\fircuit cut-off \fy\fte\b.\f
 If \fy\fte\b i\f not working correctly, have Ya\baha dealer check vehicle. PAGE
4-3, 4-9
4-17
XT660Z 05-07 ING-AUS:MY03 04-06 ING 11-05-2009 10:09 Pagina 4

1
2
3
4
5
6
7
8
9
10
OPERATION AN\f IMPORTANT RI\fING POINTS
EAU15951
Read the Owner's \fanual care\bully to
become \bamiliar with all controls. I\b
there is a control or \bunction you do not
understand, ask your Yamaha dealer.
EWA10271
\bARNING0
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.
6-1
EAU48020
TIP
This model is equipped with a lean an-
gle sensor to stop the engine in case
o\b a turnover. In this case, the multi-
\bunction display indicates error code
30, but this is not a mal\bunction. Turn
the key to "OFF" and then to "ON" to
clear the error code. Failing to do so
will prevent the engine \brom starting
even though the engine will crank
when pushing the st\sart switch.
EAUB1570
Starting the engine
In order \bor the ignition circuit cut-o\b\b
system to enable starting, one o\b the
\bollowing conditions must be met:
●The transmission is in the neutral
position.
●The transmission is in gear with
the clutch lever pulled and the
sidestand up.
EWA10290
\bARNING0
●Before starting the engine,
check the function of the igni-
tion circuit cut-off system ac-
cording to the procedure de-
scribed on page 4-18\ .
●Never ride with the sidestand
down.
1. Turn the key to “ON” and make sure that the engine stop switch is
set to “
I”.
XT660Z 05-07 ING-AUS:MY03 04-06 ING 11-05-2009 10:09 Pagina 5

PERIODIC MAINTENANCE AND ADJUSTMENT
7-32
1
2
3
4
\f
6
7
8
\b
10
ECA10640
NOTICE
Do not use a fuse of a higher am-
perage rating than recommended
to avoid causing extensive damage
to the electrical system and possi-
bly a fire.
3. Turn th\f k\fy to \bON” and turn on th\f \fl\fctrical circuit in qu\fstion to
ch\fck if th\f d\fvic\f op\frat\fs.
4. If th\f fus\f imm\fdiat\fly blows again, hav\f a Yamaha d\fal\fr
ch\fck th\f \fl\fctrical syst\fm.
1. Parking lighting fus\f
2. Signaling syst\fm fus\f
3. H\fadlight fus\f
4. Ignition fus\f
5. El\fctronic fu\fl inj\fction fus\f
6. Radiator fan fus\f
7. Backup fus\f
8. R\fs\frv\f fus\fs
Th\f main fus\f and fus\f box ar\f locat-
\fd und\fr th\f s\fat. (S\f\f pag\f 7-31.)
If a fus\f is blown, r\fplac\f it as follows.1. Turn th\f k\fy to \bOFF” and turn off th\f \fl\fctrical circuit in qu\fstio\hn.
2. R\fmov\f th\f blown fus\f, and th\fn install a n\fw fus\f of th\f sp\fcifi\fd
amp\frag\f.
7
8
654321Specified fuses:
Main fus\f:30 A
Parking lighting fus\f: 10 A
Signalling syst\fm fus\h\f: 10 A
H\fadlight fus\f: 20 A
Ignition fus\f: 10 A
Fu\fl inj\fction syst\fm \hfus\f: 10 A
Radiator fan fus\f: 7.5 A
Backup fus\f (for odom\ft\fr,
clock and immobiliz\fr): 10 A
XT660Z 05-07 ING-AUS:MY03 04-06 ING 11-05-2009 10:10 Pagina 7-32

1
2
3
4
5
6
7
8
9
10
PERIODIC M\fINTEN\fNCE \fND \fDJ\bSTMENT
7-39
TIP
●Make sure that the slot in the
brake \faliper bra\fket is fit over the
retainer on the s\bingarm.
●Make sure that there is enough
spa\fe bet\been the brake pads
before installing the\b \bheel.
2. Install the drive \fhain onto the rear spro\fket.
3. Install the axle nut, and then lo\b- er the rear \bheel so that it is on
the ground.
4. Adjust the drive \fhain sla\fk. (See page 7-24.)
5. Apply the rear brake several times, and then tighten the axle
nut to the spe\fified\b torque.
Tightening torque:
Axle nut:105 Nm (10.5 m·kgf, 75 ft·lbf)
EAU25871
Troubleshooting
Although Yamaha motor\fy\fles re\feive
a thorough inspe\ftion before shipment
from the fa\ftory, trouble may o\f\fur
during operation. Any problem in the
fuel, \fompression, or ignition systems,
for example, \fan \fause poor starting
and loss of po\ber.
The follo\bing troubleshooting \fharts
represent qui\fk and easy pro\fedures
for \fhe\fking these vital systems your-
self. Ho\bever, should your motor\fy\fle
require any repair, take it to a Yamaha
dealer, \bhose skilled te\fhni\fians have
the ne\fessary tools, experien\fe, and
kno\b-ho\b to servi\fe the motor\fy\fle
properly.
Use only genuine Yamaha repla\fe-
ment parts. Imitation parts may look
like Yamaha parts, but they are often
inferior, have a shorter servi\fe life and
\fan lead to expensive repair bills.
EWA15141
W\fRNING0
When checking the fuel system, do
not smoke, and make sure there
are no open flames or sparks in the
area, including pilot lights from wa-
ter heaters or furnaces. Gasoline or
gasoline vapors can ignite or ex-
plode, causing severe injury or
property damage.
XT660Z 05-07 ING-AUS:MY03 04-06 ING 11-05-2009 10:10 Pagina 7-39

PERIODIC MAINTENANCE AND ADJUSTMENT
7-40
1
2
3
4
\f
6
7
8
\b
10
EAU42131Troubleshooting charts
Starting problems or poor engine performance
1. Fuel
2. Compression
3. Ignition
4. Battery
Check the fue\f \feve\f in the
fue\f t\bnk.
Oper\bte the e\fectric
st\brter.
Remove the sp\brk p\fug
\bnd check the e\fectrodes.
Oper\bte the e\fectric
st\brter.
There is enough
fue\f.
There is
compression.
Wet.
The engine turns
over quick\fy.
There is no fue\f.
There is no
compression.
Dry.
The engine turns
over s\fow\fy.
Check the
compression.
Check the ignition.
Wipe off with \b dry c\foth \bnd correct
the sp\brk p\fug g\bp, or rep\f\bce the
sp\brk p\fug.
The b\bttery is good.
H\bve \b Y\bm\bh\b de\b\fer check the
vehic\fe.
Check the b\bttery \fe\bd connections,
\bnd ch\brge the b\bttery if necess\bry.
Oper\bte the e\fectric st\brter.
The engine does not st\brt.
Check the b\bttery.
The engine does
not st\brt. H\bve \b
Y\bm\bh\b de\b\fer
check the vehic\fe.
Supp\fy fue\f.
H\bve \b Y\bm\bh\b de\b\fer check
the vehic\fe.
The engine does not st\brt.
Check the compression.
XT660Z 05-07 ING-AUS:MY03 04-06 ING 11-05-2009 10:10 Pagina 7-40

SPECIFICATIONS
9-3
1
2
3
4
5
6
7
8
9
1\f
Rea\b suspension:
Type: Swingarm (lin\f suspension\b
Spring/damper type: Coil spring/gas-oil damper, spring
preload adjustable
Wheel travel: 200 mm (7.87 in\b
Elect\bical system:
Ignition system:Transistorized coil ignition (digital\b
Charging system: A.C. magneto
Batte\by:
Model:GT9B-4
Voltage, capacity: 12 V, 8 Ah
Headlight:
Bulb type:Halogen bulb
Bulb voltage, wattage x quantity:Headlight:12 V, 55 W x 2
Auxiliary light: 12 V, 5 W x 2
Tail/bra\fe light: LED
Front turn signal light: 12 V, 10 W x 2
Rear turn signal light: 12 V, 10 W x 2
Meter lighting: LED (bac\flight\b Neutral indicator light:
LED
Turn signal indicator light: LED
High beam indicator light: LED
Coolant temperature warning light: LED
Engine trouble warning light: LED
Immobilizer system indicator light: LED
Fuses:Main fuse:
30 A
Headlight fuse: 20 A
Signaling system fuse: 10 A
Ignition fuse: 10 A
Par\fing lighting fuse: 10 A
Radiator fan fuse: 7.5 A
Fuel injection system fuse: 10 A
Bac\fup fuse (for odometer, cloc\f and immobilizer\b:
10 A
XT660Z 08-10 ING-AUS:MY03 07-10 ING 11-05-2009 10:10 Pagina 8

Dimmer switch ..................\o..............4-9
Engine sto\f switch..................\o........4-9
Hazar\b switch ..................\o.............4-10
Horn switch ..................\o..................\o.4-9
Pass switch ..................\o..................\o.4-9
Start switch ..................\o..................\o.4-9
Turn signal switch ..................\o.........4-9
Hea\blight bulb, re\flacing .................7\o-33
High beam in\bicator light ..................\o.4-4
Horn switch ..................\o..................\o....4-9
I I\bentification numbers ..................\o....10-1
I\bling s\fee\b, checking ..................\o...7-15
Ignition circuit cut-off system............4-17 Checking o\feration \froce\bure .....4-18
Immobilizer system ..................\o..........4-1
Immobilizer system in\bicator light ......4-4
In\bicator an\b warning lights ...............4-3\o Coolant tem\ferature warning light ..................\o..................\o.........4-4
Engine trouble warning light ...........4-4
High beam in\bicator light ................4-\o4
Immobilizer system in\bicator light ..................\o..................\o.........4-4
Neutral in\bicator light ..................\o....4-4
Turn signal in\bicator light................4-\o3
Instruments ..................\o..................\o....4-3
Instrument an\b control functions ........4-1
K Keys ..................\o..................\o...............4-1\o L
Labels (location of im\fortant labels) ..1-1
License \flate light bulb, re\flacing....7-35
Location of im\fortant labels ...............1-1\o
Loa\bing ..................\o..................\o..........2-3
Lubricating the brake an\b clutch levers ..................\o................7-\o26
Lubricating the brake \fe\bal..............7\o-27
Lubricating the cables ..................\o....7-25
Lubricating the \brive chain ...............7-2\o5
Lubricating the si\bestan\b .................7\o-27
Lubricating the throttle gri\f an\b cable ..................\o..................\o..7-26
Lubricating the swingarm \fivots.......7-28
M Main switch/steering lock ..................\o.4-2
Mo\bel label ..................\o..................\o...10-1
Motorcycle noise regulation (for Australia) ..................\o..............10-2\o
Multi-function \bis\flay..................\o........4-5 Clock mo\be ..................\o..................\o.4-7
Self-\biagnosis \bevices ..................\o..4-7
Tachometer ..................\o..................\o.4-6
Tri\fmeter an\b tachometer mo\bes ..4-6
N Neutral in\bicator light ..................\o.......4-4
O Oil filter element ..................\o.............7-10
O\feration an\b im\fortant ri\bing \foints ..................\o..................\o..........6-1 Owner’s tool kit ..................\o................7-\o1
P Panels, removing an\b installing .........7-6
Parking ..................\o..................\o...........6-4
Pass switch ..................\o..................\o....4-9
Perio\bic maintenance an\b a\bjustment ..................\o.............7-1
Perio\bic maintenance chart for the emission control system ...........7-2
Pre-o\feration check list ..................\o...5-2
Pre-o\feration checks ..................\o.......5-1
R Rear sus\fension, lubricating............7-27
Rear wheel ..................\o..................\o...7-38 Installing..................\o..................\o....7-39
Removing..................\o..................\o..7-38
Recor\b the i\bentification numbers ...10-1
S Safety information ..................\o............2-1
Seat ..................\o..................\o..............4-14\o
Self-\biagnosis \bevices ..................\o.....4-7
Shift \fe\bal ..................\o..................\o....4-10
Shifting ..................\o..................\o...........6-2
Shock absorber assembly (a\bjusting) ..................\o..................\o.4-16
Si\bestan\b ..................\o..................\o.....4-17
Si\bestan\b, checking an\b lubricating ..................\o..................\o.7-27
Si\bestan\b switch, checking ..............4-18\o
S\fark \flug, checking..................\o........7-8
INDEX
Australia 5/8/10 \á 16:21 Pá\fina 94