2012 VOLKSWAGEN GOLF lights

As long as the indicator lights are on, expect engine malfunctions , increased
fuel consumption and loss of engine efficiency . <1
tory information and heed the on page 295.
T he
catalytic converter provides exhaust gas lrealmenll o help reduce pollutants in the exhaust
gas . To help ensure long service life of the exhaust
system and gasoline engine catalytic converter :
use unleaded fuel.
Neve r comple te ly empty the fuel la nk .
Do not exceed the corre ct oil level 227 .
Do not low the vehicle to start it, but use a
j u mp-start instead 327.
Care, cleaning, maintenance
you expe rience misfire s, loss of power or th e
Facili ty. Otherwise , gasoli n e
could reach the exhaust system and gel into the
atmosphere . The catalyt ic converter could also be
damaged
by overhea ting! <1

Fuses
Introduction
this sec tion find information about:
Fuses in the vehicle
..................... 318
Repla cing blown
fuses . . . . . . . . . . . . . . . . . . . 319
Due to on go ing deve lopmen t of the vehic le , of fuses and the bin ed fuse protection of multiple loads with one
fuse , an up-to -date overview of the fu se locat ion per load is not possible at the time of print ing . tailed information regarding fuse box layou t is from auth orized Volkswagen dealers and
author ized Vol ksw agen
ge neral , one fuse can protect several loads. load can also be protected by seve ral fuses .
Find out why the fu se blew and correct the
lem before replacing a blown fuse . placed fuse blows again after a s hort time , the
e lec tr ic al system should be chec ked by an auth o r­
ized Volkswagen deale r o r an autho rized Volkswa­
gen
F acility .
More information:
Prepa ration s for working in the engine compart­
ment
High volta g e systems in the engin e
tronic ignition system.
Using the wrong fuse, using a blown fuse
that has been repaired , and using metal ob-jects in plac e of fuses to complete the electri-connection in the circuit can cause fires
and serious p erson al injury.
with a fuse of the same amperage (same or and same imprint) and same
Never replace fuses with a metal strip , a
paper clip, or a similar objec t.
To help preven t damage to the electrical
system , switch off ail lights and accessories ,
switch off the ignition , and remov e the key from the ignition switch before replacing a fuse .
ferent loca tions In the electrical system.
A single load (a sin gle elec trica l com ponent )
fuse may pro tect several loads (seve ral electrical co mp one nts ). Prac tic al tip s 317

Fig. 167 o f a blown fuse.
tory information and heed the WARN­on page 317.
Preparations
off the headlights . the ignition , and electrical consumers .
the appropriate fuse box
167.
a flashlight on th e fuse. This makes it easier
t o
165 fro m the fuse box cover .
For small fuses, slide the tweezers 168 onto the fuse from the top A. Fig
. 168 Removing
or inserting a fuse using the
p lastic tweezers .
For larger fuses, slide the tweezers onto the
f use from the side B.
the fuse is blown , replace the fuse with a new fuse of the same amperage (same color and same
impri nt) and same overall size
necessary, replace the plastic tweezers in the
fuse box cover .
Replace the cove r.
Practica l tips

N
After replacing a headlight bulb or other light bulb, always make sure that the rubber covers or plastic caps have been properly and secure-
Indicator light
to help prevent water from getting into the electrical connections and headlight housing and damaging the electrical system.
on
Lights up Possible cause Proper response
Light bulb of the exterior vehicle lighting not Replace the light bulb that isn't working .
working .
When the ignition is switched on, several warning
and indicator lights come on briefly for a function
check . They go
out after a few seconds.
WARNING
Failure to heed warning lights and instrument cluster text messages can cause the vehicle to break down in traffic and result in a
can result in vehicle damage.
indicated. However, indicator light come on if LEO s fail.
on
Checklist
for replacing a light bulb. Please carry out these steps only in the order listed
1.
179.
3.
4.
5.
6 .
7.
8.
9 .
position
122 .
Automatic transmission :
the transmission into Park (P) 171.
the engine and remove the key from the ignition switch 165.
Manual transmission: Engage a gear
122.
Let the burned
out light cool down.
Check
if the fuse is blown 317 .
Replace the burned
out light according to
Practical tips 321

Checklist (continued)
12. Never touch the glass
of the light bulb with your bare hands. Fingerprints can cloud the out er sur­face of the light bulb when heated , affecting the lighting power, clouding the reflector, and reduc ing
the bright ness .
1 3 . Always make sure tha t the new bulb works .
cor­
rectly ; the connection plug may not be complete ly seated ; the corresponding fuse may be burned
out ; or the bulb may be bad .
14. Always have the headlights adjusted by an authorized Volkswage n dealer or an author ized Vol ks­
wagen Facility after a headlight bulb has been replaced.
Disregarding the safety-related checklist may
lead to accidents and serious personal inju­ries.
Replacing headlight bulbs
the checklist. Follow accepted safety practices and use common sense .
Always insert and remove lamps carefully to avoid damage to the vehicle paint or to other parts of the vehicle. Fig . 1 69
on page
169 Low be am head- High
beam head-
Parking
321.
2 .
the engine hood
Do

Please carry out each step only in the order specified:
169 Low beam head-High beam head-Parking lights
the way to the left and it out w ith
the way
the rear. The right headlig ht assembly is th e
mirror image of the left headlig ht assembly.
in LED daytime your authori zed wagen dealer or an Authorized Volkswagen ice Facility for assistance. Changing the
Remove cover in wheel house liner. Fi
g. 171 Remove bulb in fog light.
on page
321.
2.
323

Changing the
the rear bumper : license plate light. Fig. 177 License plate light: removing the bulb
holder .
P le a se
first read and note the introductory information and heed the on page
in the order s p ecified :
17 6.
3 .
177 ®and disconnec t th e connector.
5. Turn the holder in the direc tion indicated by the arrow 177 @.
6.
the bulb ho lder in the lice nse plate light and turn it co unterc lockw ise in th e direction ind i-
cated by the arrow 177 until it stops.
8. Connect the connector to the bulb holder .
9. the license plate light carefully into the opening in the bumper . Make sure the license
plate light is installed in the correct direction.
Press the license plate
cannot replace the in LED license plate lights. Contact your authorized Volks­
wagen dealer or an Author ized Volkswagen ice
Do it yourself

the engine
the engine of the vehicle with the good
battery that is providing help and let it run at idle
speed .
Turn on the ignition of the vehicle with the dead
b attery. the engine starts, wait 2 to 3 minutes
the engine does
not start within about seconds , turn off the tion and wait at least 1 minute ; then try again .
Removing the jumper cables
Before you remove the jumper cables. swi tch
off the headlights (if they are on) .
the vehic le with the dead batte ry , switc h on
t he heater fa n and the rea r window defroster. This
he lps
to m in im ize voltage spikes when the cables
a re disconnected.
With the engine running , remove the jumper
nected .
Disconnect the black (- ) cab le f rom the vehicle
wit h the dead battery .
Disconnec t the black (-) cable from the other
vehicle (vehicle with the good battery) .
Disconnect the red(+) cable from the other
Disconnect the red (+ ) cable from the vehicle
with the dead battery .
Close the battery cover.
Improper use of jumper cables when starting a vehicle with a dead battery can
cause the battery to explode , leading to
Always wear proper eye protection. Never
lean over the vehicle battery.
Attach the jumper cables in the correct
Never connect the negative cable from the
vehicle providing starting assistance to parts of the fuel system or to the brake hoses or brake lines.
Never
sistance.
Avoid electrostatic discharge in the may cause the hydrogen gas escaping from the vehicle battery to ignite.
Never jump-start a vehicle with a battery
that is damaged or frozen or that was frozen
and has thawed. The battery can explode.
Always the instructions of the jumper cable manufacturer.
Never connect the negati ve cable from the other vehicle directly to the negative terminal of the dead battery . The hydrogen gas from
the battery is explosive.
Never short out the battery terminals by connecting the positive(+) and negative
Practical tips 329