2012 TOYOTA PRIUS V Accessories, Audio & Navigation (in English)

9
(1) Connection:
As soon as you enter the car and turn the
ignition on, the system will link with your
hand-set automatically. You will hear one
beep when the connection is established.
Important:
If it is the first time you connect your
hand-set, or your hand-set was not the
last connected to the system, please initi
-
ate connection or reconnection via your
hand-set.
Note:
Whenever the Hands-free connection/link is
removed and a headset icon does not ap-
pear on the hand-set screen, please activate
connection/link as suggested (for example:
Vehicle or mobile hand-set is powered off
and then turned on; or out of 30ft/10 meter
sensing range). See your hand-set user
manual for more details.
Using The System
123
(2) Auto ConneCtion order:
The paired phone(s) will automati -
cally connect in the following order. Only Phone 3 in car, Phone 3
connects3
All three phones in car, Phone 1 connects

10(B.) If the phone does not automatically
disconnect Select “disconnect” from your
hand-set menu. See your hand-set user
manual for more details.


Using The System

(1) Voice Dial:
If your mobile’s hand-set is voice dial
enabled, when in standby mode, press the
 key. When you hear a beep’ from your
hand-set, say the voice tag.
Note:
BLU Logic does not have voice dial feature
but is compatible with equipped phones.
A) Please make sure there are voice tags
recorded into the mobile hand-set before
using voice dialing function. This function
is only applicable to mobile hand-sets with
Hands-free Profile. Because of variations
among different hand-sets you may not hear
a beep. Please refer to your mobile hand-
set’s user guide for additional information.
(3) Disconnection:
Follow these steps to disconnect the kit
from the current paired hand-set.
(A) Power off the vehicle. Phone should
automatically disconnect.
Using The System
13
3
No Phone 2 in car, Phone 1
connects
Only Phone 3 in car, Phone 3 connects

11
B.) When streaming music,
due to varia-
tions in different hand-set profiles, music
streaming may not resume after the key is
pressed.
(2) Call Answer:
Press the key to accept a call, or answer
via your mobile hand-set in the normal way.
(3) Call End:
Press the key to end a call, or end via your
mobile hand-set in the normal way.
(4) Call Reject:

Press and hold the key for 2 seconds (ap-
proximately) until you hear a short beep,
then release the key.
(5) Last Number Re-Dial:
In standby mode, press key for 2 seconds
(approx.) until you hear a short beep, then
release the key.
Note:
When streaming music, due to variations of different hand-set profiles, music streaming
may not resume after key is pressed.
(6) Mute & Un-mute:
When a conversation is in progress, you can
mute or un-mute the microphone so that the
other party cannot hear you.
To Mute:
Press and hold the keys
simultaneously for 2 seconds (approx.)
until you hear 1 beep from the speaker, then
release.
To Un-Mute: Press and hold the keys
simultaneously for 2 seconds (approx.)
until you hear 1 beep from the speaker, then
release.
(7) Volume Adjustment:

When a conversation is in progress, press
the volume upor downkeys repeatedly
until you reach the desired volume level.
Using The System

12
Using The System
Continued:
(8) Call Interchange:
When a conversation is in progress, you
may transfer the call in between the system
and hand-set.
System to Hand-set: Press key for 4 sec-
onds and release when you hear 2 beep’s.
Hand-set to System: Press key for 4
seconds and release when you hear 2 beep’s
or restart the vehicle.
Note:
This could vary owing to various hand-sets
features.
(9)Call Waiting:
When a call waiting tone is heard from your
hand-set, press either the volume up ▲or
volume down
 button for
8 seconds (approx.) to switch to the other
call. Repeat the same procedure to switch
back to the first call. (10) Music Stream & Pause:
After completion of Hands-free connec-
tion to an A2DP hand-set, you may listen
to music stored on your hand-set through
the vehicle’s speakers. Simply activate the
music streaming application on your hand-
set. Refer to your hand-set’s user manual
for more details.
Note:
Sound output is through the front speakers
only.
(11) Automatic Switch between Music
Stream & Calls:
When streaming hand-set music via the car
speakers, during an incoming call, music
will be paused. You may answer the call via
the system. Music stream will resume after
completion of the call.

13
(12) Sound Quality
For improved sound quality during BLU
Logic operation, please:
- Keep all windows up
- Avoid setting the HVAC blower speed on
high
- Avoid multiple passengers speaking at the
same time
- Project your voice clearly in the

direction of the instrument panel Sound
Quality may be effected by the following:
- Background noise
- road conditions
- vehicle speed
- wireless carrier performance
- wireless hand-set performance
Note: Sound degradation may occur with
high background noise levels in the vehicle,
including high vehicle speeds and/or road
conditions.
(13) If You need Assistance
Both Toyota and your Toyota dealer are
dedicated to serving your automotive needs.
Should you have a problem or concern - please take the following steps
Step 1
Discuss the situation with the dealership or
customer relations manager.
Step 2
If the dealership does not address your
concern to your satisfaction, call the Toyota
Customer Experience Center at
(800)
331-4331. If you are hearing- or speech-
impaired, call (800) 443-4999 (TDD).
In Canada contact our Toyota Canada
Customer Interaction
Centre at 1-888-TOYOTA-8 or
1-888-869-6828.
Care and Maintenance
(A) Do not attempt to disassemble the sys-
tem as it does not contain user serviceable
components.
(B.) Only go to designated service centers
for installation/removal of system.
(C) Do not use vinyl protectants or similar
products to clean the immediate area around
the microphone as these products will dis-
solve the microphone adhesive.
Using The System

14
Hands-free Specifications Version 2.1 + EDR; Class 2, 10 Meters/ 30 ft.
Hands-free Profile Supported HSP1.1, HFP1.5, A2DP & AVRCP Profiles
Operating Frequency Band 2.402 to 2.480GHz unlicensed ISM band
Multi-Pairing Up to 7 Hands-free devices
Hands-free DSP Full Duplex, Noise Reduction, Echo Cancellation
Power supply voltage range DC 9 ~ 25 volts
Working temperature -25 ஂC ~ 75 ஂC / -13ஂF~ 167ஂF
Storage temperature -35 ஂC ~ 85 ஂC / -31ஂF~ 185ஂF
Current consumption In Operation:
ACC ON (during conversation)
100mA ~2A(Max)/DC 12V
In Standby Mode:
ACC ON (standby mode) 10mA(Max)/DC 12
ACC OFF < 1mA
Product Specifications

15
Microphone
(including amplifying circuit)Category: Omni Directional
Sensitivity: -56dB ± 2dB tolerance
SN ratio: >55dB (Min)
Frequency response: Tuned to optimize voice
response from 200Hz - 3kHz
Amplifier output
(loudspeaker) Output power: 10W Peak
Impedance: 4 Ohm
Max output current: 3A
Max undistorted amplitude: 10Vpp
Mute mode Active Low Mute
Sink current: 40mA @ 0.5V
Dimensions (L/W/H) 134.5 x 81 x 30 mm / 5.26” x 3.19” x 1.18”
Reference # 99-9550-000 Rev. 6
Product Specifications

16
Indice
Guia de Empizo Rápido..........................................................16-17
Guia de Enlazamiento...................................................................18
Resolver Problemas de Enlazamiento.....................................19
Uso del Systema........................................................................20-22

Conexión...................................................................................20

Desconexión.............................................................................20

Marcar por voz.........................................................................20

Contestar Llamada.....................................................................21

Terminar Llamada......................................................................21

Rechazar Llamada......................................................................21

Re-marcar el Ultimo Numero......................................................21
Silenciar y Des-Silenciar............................................................21

Para Silenciar.............................................................................21
Ajuste del Volumen...................................................................21
Intercambio de llamada..............................................................22
Llamada en Espera.....................................................................22
Tocar Música & Pausa................................................................22

Cambio automatico entre transferencia de música y llamadas........22

Calidad de Sonido......................................................................23
Especificaciones del Producto.................................................24-25
Advertencia de la FCC:
Cambios o modificaciones no expresamente aprobadas por la entidad responsable por
conformidad puede causar que el usuario pierda la autoridad de operar el equipo.