Page 568 of 636
568 5-2. Steps to take in an emergency
HILUX_EE (OM0K132E)
Installing the spare tire
Remove any dirt or foreign mat-
ter from the wheel contact sur-
face.
If foreign matter is on the wheel
contact surface, the wheel nuts
may loosen while the vehicle is in
motion, causing the tire to come
off.
Install the tire and loosely tighten each wheel nut by hand by
approximately the same amount.
When replacing a steel wheel
with a steel wheel, tighten the
wheel nuts until the tapered por-
tion comes into loose contact
with the disc wheel seat.
When replacing an aluminum
wheel with a steel wheel, tighten
the wheel nuts until the tapered
portion comes into loose contact
with the disc wheel seat.
STEP1
STEP2
Tapered portion
Disc wheel
seat
Tapered portion
Disc wheel
seat
Page 569 of 636
5
569 5-2. Steps to take in an emergency
When trouble arises
HILUX_EE (OM0K132E)When replacing an aluminum
wheel with an aluminum wheel,
turn the wheel nuts until the
washers come into contact with
the disc wheel.
Lower the vehicle.
Disc wheel
Washer
Wheel nut
STEP3
Page 570 of 636
570 5-2. Steps to take in an emergency
HILUX_EE (OM0K132E)Firmly tighten each wheel nut two or three times in the order
shown in the illustration.
Tightening torque:
105 N•m (10.7 kgf•m, 77 ft•lbf)
Vehicles with spare tire of the same wheel type as the
installed tires: Reinstall the wheel ornament.
Ty p e A
Ty p e B
STEP4
STEP5
Page 574 of 636

574 5-2. Steps to take in an emergency
HILUX_EE (OM0K132E)
CAUTION
Using the jack handle
Tighten all the jack handle bolts securely using a Phillips-head screwdriver
or your hand, to prevent the extension parts from coming apart unexpect-
edly.
Replacing a flat tire
Observe the following precautions to reduce the risk of death or serious
injury:
Do not touch the disc wheels or the area around the brakes immediately
after the vehicle has been driven.
After the vehicle has been driven the disc wheels and the area around the
brakes will be extremely hot. Touching these areas with hands, feet or
other body parts while changing a tire, etc. may result in burns.
Lower the spare tire completely to the ground before removing it from
under the vehicle.
Do not try to remove the wheel ornament by hand. Take due care in han-
dling the ornament to avoid unexpected personal injury.
Have the wheel nuts tightened with a torque wrench to 105 N•m
(10.7 kgf•m, 77 ft•lbf) as soon as possible after changing wheels.
Do not attach a heavily damaged wheel ornament, as it may fly off the
wheel while the vehicle is moving.
When installing a tire, only use wheel nuts that have been specifically
designed for that wheel.
If there are any cracks or deformations in the bolt screws, nut threads or
bolt holes of the wheel, have the vehicle inspected by any authorized
Toyota dealer or repairer, or another duly qualified and equipped profes-
sional.
Failure to follow these precautions could cause the wheel nuts to loosen and
the tire to fall off, resulting in death or serious injury.
Page 575 of 636
5
575 5-2. Steps to take in an emergency
When trouble arises
HILUX_EE (OM0K132E)
CAUTION
When installing the wheel nuts
Be sure to install the wheel nuts with the tapered end facing inward.
(
P. 503)
After using the tools and jack
Before driving, make sure all the tools and jack are securely in place in their
storage location to reduce the possibility of personal injury during a collision
or sudden braking.
NOTICE
Do not drive the vehicle with a flat tire.
Do not continue driving with a flat tire.
Driving even a short distance with a flat tire can damage the tire and the
wheel beyond repair.
When stowing the flat tire
Ensure that there is no object caught between the tire and the vehicle under-
body.
When assembling the jack handle extension
Tighten all the joints securely. Otherwise the extension may come off and it
may damage the paint or vehicle body.
Page 589 of 636
5
589 5-2. Steps to take in an emergency
When trouble arises
HILUX_EE (OM0K132E)
NOTICE
To avoid damage to the transmission and other components
Avoid spinning the wheels and depressing the accelerator pedal more
than necessary.
If the vehicle remains stuck even after these procedures are performed,
the vehicle may require towing to be freed.
Page 591 of 636
5
591 5-2. Steps to take in an emergency
When trouble arises
HILUX_EE (OM0K132E)
CAUTION
If the engine has to be turned off while driving
Power assist for the brakes and steering wheel will be lost, making the
brake pedal harder to depress and the steering wheel heavier to turn.
Decelerate as much as possible before turning off the engine.
Never attempt to remove the key, as doing so will lock the steering wheel.
Page 594 of 636
594
HILUX_EE (OM0K132E)
6-1. Specifications
Maintenance data (fuel, oil level, etc.)
Dimensions
*1: Unladen vehicle
*2: Without rear bumper
*3: With rear bumper
*4: Without over fender
*5: With over fender
*6: With 205R16C tires
*7: With 255/70R15C tires
*8: With 265/65R17 tires
Overall length5135 mm (202.1 in.)*2
5260 mm (207.0 in.)*3
Overall width1760 mm (69.3 in.)*4
1835 mm (72.2 in.)*5
Overall
height
*1
Single-cab models1795 mm (70.7 in.)*6, 7
1805 mm (71.0 in.)*8
Extra-cab models
1835 mm (72.2 in.)
Double-cab models1850 mm (72.8 in.)*6, 7
1860 mm (73.2 in.)*8
Wheelbase
3085 mm (121.5 in.)
Front and rear tread1510 mm (59.4 in.)*6
1540 mm (60.6 in.)*7, 8