179 2-2. Instrument cluster
2
When driving
HILUX_EE (OM0K132E)
The meters and display illuminate when
The engine switch is in the “ON” position.
The brightness of the instrument panel lights
When the headlight switch is turned to on, the brightness will be reduced
slightly unless the control dial is turned fully clockwise.
When disconnecting and reconnecting battery terminals
The trip meter data will be reset.
NOTICE
To prevent damage to the engine and its components
Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
The engine may be overheating if the engine coolant temperature gauge is
in the red zone (H). In this case, immediately stop the vehicle in a safe
place, and check the engine after it has cooled completely. (P. 584)
457 3-6. Other interior features
3
Interior features
HILUX_EE (OM0K132E)Circling calibration
If the direction display on the
compass flashes, circling calibra-
tion needs to be performed.
Stop the vehicle in a place where it is safe to drive in a circle.
Press and hold the “INFO.” or
“DISP” button until a number (1
to 15) appears on the clock, and
press the “RESET” button.
“- N -” appears on the direction
display.
Drive the vehicle at 8 km/h (5
mph) or less in a circle until a
direction is displayed.
If there is not enough space to
drive in a circle, drive around the
block until a direction is dis-
played.
STEP1
STEP2
STEP3
