2012 TOYOTA HILUX change time

36
HILUX_EE (OM0K132E)
For your information
Main Owner’s Manual
Please note that this manual applies to all models and all equipment, includ-
ing options. Therefore, you may find some explanations for equipment not
installed on your vehicle.
All specifications provided in this manual are current at the time of printing.
However, because of the Toyota policy of continual product improvement, we
reserve the right to make changes at any time without notice.
Depending on specifications, the vehicle shown in the illustrations may differ
from your vehicle in terms of equipment.
Accessories, spare parts and modification of your Toyota
Both genuine Toyota and a wide variety of other spare parts and accessories
for Toyota vehicles are currently available on the market. Should it be deter-
mined that any of the genuine Toyota parts or accessories supplied with the
vehicle need to be replaced, Toyota recommends that genuine Toyota parts
or accessories, be used to replace them. Other parts or accessories of
matching quality can also be used. Toyota cannot accept any liability or guar-
antee spare parts and accessories which are not genuine Toyota products,
nor for replacement or installation involving such parts. In addition, damage
or performance problems resulting from the use of non-genuine Toyota spare
parts or accessories may not be covered under warranty.

190 2-2. Instrument cluster
HILUX_EE (OM0K132E)
Outside temperature display
In the following situations, the correct outside temperature may not be dis-
played, or the display may take longer than normal to change:
When the vehicle is stopped, or moving at low speeds (less than 20 km/h
[12 mph])
When the outside temperature has changed suddenly (at the entrance/
exit of a garage, tunnel, etc.)
When “--” is displayed
The system may be malfunctioning. Take your vehicle to any authorized
Toyota dealer or repairer, or another duly qualified and equipped profes-
sional.
When disconnecting and reconnecting battery terminals
The following information data and settings will be reset:
Average fuel consumption
Average vehicle speed
Elapsed time

257 3-1. Using the air conditioning system and defogger
3
Interior features
HILUX_EE (OM0K132E)
Using the automatic air conditioning system
Press the “AUTO” button.
The air conditioning system begins to operate. Air outlets and
fan speed are automatically adjusted according to the tem-
perature setting.
Press to increase the temperature and to
decrease the temperature.
Press the “A/C” button.
The air cooling and dehumidification function switches
between on and off each time the button is pressed.
Adjusting the settings manually
To adjust the fan speed, press to increase the fan
speed and to decrease the fan speed.
Press the “OFF” button to turn the fan off.
To adjust the temperature settings, press to increase
the temperature and to decrease the temperature.
To change the air outlets, press , , or
.
STEP1
STEP2
STEP3
STEP1
STEP2
STEP3

275 3-2. Using the audio system
3
Interior features
HILUX_EE (OM0K132E)
Switching the display
Press the “TEXT” button.
Each time the button is pressed, the display changes in the following
order: Track no./Elapsed time  CD title  Track title  Artist name
CD player protection feature
To protect the internal components, playback is automatically stopped when
a problem is detected.
Display
Up to 12 characters can be displayed at a time.
If there are 13 or more characters, pressing and holding the “TEXT” button
for 1 second or more enables to display the remaining characters.
A maximum of 24 characters can be displayed.
If the “TEXT” button is pressed for more than 1 second again or has not
been operated for more than 6 seconds, the display will return to the first 12
characters.
Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.

282 3-2. Using the audio system
HILUX_EE (OM0K132E)
Random playback
Pressing the 2 (RDM) button changes modes in the following order:
Folder random
 Disc random  Off.
Repeat play
Pressing the 1 (RPT) button changes modes in the following order:
File repeat
 Folder repeat*  Off.
*: Available except when RDM (random playback) is selected
Switching the display
Press the “TEXT” button.
Each time the button is pressed, the display changes in the following
order: Track no./Elapsed time  Folder name  File name 
Album title (MP3 only)  Track title  Artist name

292 3-2. Using the audio system
HILUX_EE (OM0K132E)
Shuffle playback
Pressing the 2 (RDM) button changes modes in the following order:
Track shuffle  Album shuffle  Off.
Repeat play
Press the 1 (RPT) button.
To cancel, press the 1 (RPT) button again.
Switching the display
Press the “TEXT” button.
Each time the button is pressed, the display changes in the following
order: Track no./Elapsed time  Album title  Track title  Artist name
Adjusting sound quality and volume balance
Press the “SETUP” button to enter iPod menu mode.
Turning the “TUNE•SCROLL” knob changes sound modes.
(P. 305)
STEP1
STEP2

300 3-2. Using the audio system
HILUX_EE (OM0K132E)
Repeat play
Pressing the 1 (RPT) button changes modes in the following order:
File repeat
 Folder repeat*  Off.
*: Available except when RDM (random playback) is selected
Switching the display
Press the “TEXT” button.
Each time the button is pressed, the display changes in the following
order: Track no./Elapsed time  Folder name  File name 
Album title (MP3 only)  Track title  Artist name
USB memory functions
Depending on the USB memory that is connected to the system, the
device itself may not be operable and certain functions may not be avail-
able. If the device is inoperable or a function is unavailable due to a mal-
function (as opposed to a system specification), disconnecting the device
and reconnecting it once again may resolve the problem.
If the USB memory still does not begin operation after being discon-
nected and reconnected, format the memory.
Display
P. 275

311 3-2. Using the audio system
3
Interior features
HILUX_EE (OM0K132E)
Turning the power on
Press the “MODE” button when the audio system is turned off.
Changing the audio source
Press the “MODE” button when the audio system is turned on. The
audio source changes as follows each time the button is pressed.
AM  FM1  FM2  CD mode 
iPod or USB memory mode  AUX  AM
Adjusting the volume
Press “+” on to increase the volume and “-” to decrease the
volume.
Hold down the button to continue increasing or decreasing the volume.
Silencing a sound
Press and hold the “MODE” button.
To cancel, press and hold the “MODE” button.