2012 TOYOTA HIGHLANDER HYBRID hood release

16
Rear view monitor system
(vehicles without navigation
system)
P. 230
Tilt and telescopic steering lock release
lever
P. 104
Glove box P. 405
Pictorial indexInstrument panel
Power back door
main switch
 P. 72
Parking brake pedal P. 194
Hood release lever P. 458
Auxiliary box P. 413
Multi-information
display
P. 203
Fuel filler door opener P. 118
Fog light switch
Headlight switch
Turn signal lever P. 219
P. 213
P. 193
Windshield wiper and
washer switch
Rear window wiper and
washer switch
P. 221
P. 224
Gauges and
meters
P. 196
Floor mat P. 427
Horn P. 195
Power (ignition) switch (vehicles
with smart key system)
P. 179

458
4-3. Do-it-yourself maintenance
Hood
Release the lock from the inside of the vehicle to open the hood.
Pull the hood release lever.
The hood will pop up slightly.
Lift the auxiliary catch lever
and lift the hood.
Hold the hood open by insert-
ing the supporting rod into
either of the slots.
STEP1
STEP2
STEP3

5
When trouble arises
565
5-2. Steps to take in an emergency
Have the vehicle inspected at your
nearest Toyota dealer as soon as
possible.
■ Overheating
The following symptoms may occur when your vehicle is overheating:
●Hybrid system output decreases.
● Steam comes from the engine area.
CAUTION
■To prevent an accident or injury when inspecting under the hood of
your vehicle
●If steam is seen coming from under the hood, do not open the hood until
the steam has subsided. The engine compartment may be very hot, caus-
ing serious injury such as burns.
● With a hybrid vehicle, there are times when the gasoline engine automati-
cally starts to run or the cooling fans suddenly start to operate. Do not
touch or approach the rotating parts of the belt or fans. Doing so may lead
to fingers, clothes or tools getting caught, resulting in an accidental injury.
● Do not loosen the coolant reservoir cap while the hybrid system and radia-
tor are hot.
Serious injury, such as burns, may result from hot coolant and steam
released under pressure.
NOTICE
■When adding engine/power control unit coolant
Wait until the hybrid system has cooled down before adding engine/power
control unit coolant.
When adding coolant, do so slowly. Adding cool coolant to a hot hybrid sys-
tem too quickly can cause damage to the hybrid system.

636
GAS STATION INFORMATION
Auxiliary catch leverP. 458Fuel filler doorP. 1 1 8
Hood release lever P. 4 5 8Fuel filler door opener P. 1 1 8Tire inflation pressure
P. 581
Back door openerP. 7 0
Fuel tank capacity (Reference) 17. 2 gal. (65.0 L, 14.3 Imp. gal.)
Fuel typeUnleaded gasoline with an Octane Rating
of 87 (Research Octane Number 91)
Cold tire inflation
pressure
P. 5 8 1
Engine oil capacity
(Drain and refill

reference) qt. (L, Imp. qt.)
Without filter 6.0 (5.7, 5.0)
With filter 6.4 (6.1, 5.4)
Engine oil type Toyota Genuine Motor Oil or equivalent
Oil grade: P. 575
ILSAC multigrade engine oil
Recommended oil viscosity: SAE 0W-20