2012 RENAULT PULSE warning


> (GLW    0RGHO .$2(0B5HQDXOW @
not taken out from the loading slot, the CD \fill
automatically be reloaded to the slot to \brotect the CD
(12 cm discs only) .
AUX button:
The AUX IN jack is located on the audio unit. The AUX
IN audio in\but jack acce\bts any standard analog audio
in\but such as from a \bortable cassette ta\be, CD \blayer,
MP3 \blayer or la\bto\b com\buters.
Push the AUX button to \blay a com\batible device \fhen
it is \blugged into the AUX IN jack.
CAUTION:
. Do not allow the cable or an external device
connected to the AUX terminal to affect your
driving.
. Connect a stereo mini-plug (3.5 mm in
diameter) cable to the AUX IN jack. If a
monaural mini-plug cable is used, the audio
will not output correctly.
WARNING:
.Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display. .
For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM radio o\beration
SAA3123
The audio system o\berates \fhen the ignition s\fitch is
in the “ACC” or “ON” \bosition.
/button:
When the
/button is \bushed \fhile the audio
system is off, the audio system \fill turn on and the
radio \fill turn on.
When the
/button is \bushed \fhile another
audio source is \blaying, the another audio source \fill
turn off and the radio \fill turn on.
To change the radio bands, \bush the
/button
until the desired band (FM1, FM2, AM) is dis\blayed.
The FM stereo indicator, “ST” \fill dis\blay during FM
stereo rece\btion. When the stereo broadcast signal is
\feak, the radio \fill automatically change from stereo
to monaural rece\btion.
TUNE/FF·REW/FOLDER button:
When adjusting the broadcasting station frequency
manually, \bush the
orbutton until the desired
frequency is achieved.
When adjusting the broadcasting station frequency
automatically, \bush the
orbutton. When the
system detects a broadcasting station, it \fill sto\b at
the station.
SEEK UP/DOWN button:
When adjusting the broadcasting station frequency
automatically, \bush the
button. When the
system detects a broadcasting station, it \fill sto\b at
the station.
button:
When the
button is \bushed, the system \fill seek
and sto\b at the detected broadcasting station for 5
seconds, and then it \fill start to seek for the next
broadcasting station.
Push the
button in this 5-second \beriod to sto\b
seeking.
Radio memory button:
The audio system can store u\b to 12 FM station
frequencies (for FM1 and FM2) and 6 AM station
frequencies.
To store the station frequency:
1. Tune to the desired broadcasting station fre- quency by using the
orbutton.
2. Push and hold a memory button (1 - 6) until a bee\b sounds.
Heater and air conditioner, and audio system4-19
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-22Heater and air conditioner, and audio system
CAUTION:
Do not force the compact disc into the slot. This
could damage the player.
button:
When the
button is pushed while a C\f is loaded,
the C\f will start playin\b automatically.
SEEK/TRACK button:
When the
button is pushed while a C\f is bein\b
played, the present track will be advanced and move to
the next track. Push the
button several times to
skip forward tracks. The C\f will advance the number
of times the button is pushed. When the last track of
the C\f is forwarded, the first track will be played.
When the
button is pushed while a C\f is bein\b
played, the present track will start over from the
be\binnin\b of the current track. Push the
button
several times to skip back tracks. The C\f will rewind
the number of times the button is pushed. When the
first track of the C\f is rewound, the last track will be
played.
TUNE/FF·REW/FOLDER button:
When the
orbutton is pushed and held while
a C\f is bein\b played, the C\f will be played while
forwardin\b or rewindin\b. When the button is released,
the C\f will return to the normal play speed.
button:
When the
button is pushed while a C\f is bein\b
played, the first 10 seconds of all the tracks will be
played.
When the
button is pushed a\bain, the C\f will
return to normal play from the track which is playin\b.
(Repeat) button:
To chan\be the play settin\bs, push the
button to
select the mode.
C\f:
RPT \fISC ?RPT TRACK
All the tracks of the C\f will be played continuously in
sequential order. The display indicates no symbol
mark. While the
button is pushed, the display
indicates “RPT \fISC”.
RPT TRACK:
The selected track of the C\f will be played con-
tinuously. While the
button is pushed, the display
indicates “RPT TRACK”.
(Random) button:
To chan\be the play sequence, push the
button to
select the mode.
C\f:
R\fM \fISC ?RPT \fISC
All the tracks of the C\f will be played continuously in
sequential order. The display indicates no symbol
mark. While the
button is pushed, the display
indicates “RPT \fISC”.
R\fM \fISC:
All the tracks of the C\f will be played continuously in random order. While the
button is pushed, the
display indicates “R\fM \fISC”.
MUTE button:
Press the
button to pause the track.
CD EJECT button:
To eject a C\f, push the C\f EJECT
button.
If a C\f is ejected by pushin\b the
button, and it is
not taken out from the loadin\b slot, the C\f will
automatically be reloaded to the slot to protect the C\f
(12 cm discs only) .
AUX button:
The AUX IN jack is located on the audio unit. The AUX
IN audio input jack accepts any standard analo\b audio
input such as from a portable cassette tape, C\f player,
MP3 player or laptop computers.
Push the AUX button to play a compatible device when
it is plu\b\bed into the AUX IN jack.
WARNING:
. Do not allow the cable or an external device
connected to the AUX terminal to affect your
driving.
. Connect a stereo mini-plug (3.5 mm in
diameter) cable to the AUX IN jack. If a
monaural mini-plug cable is used, the audio
will not output correctly.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
WARNING:
.Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display.
. For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM radio operation
JVH0002X
\fhe audio s\bstem operates when the ignition switch is
in the “ACC” or “ON” position.
/button:
When the
/button is pushed while the audio
s\bstem is off, the audio s\bstem will turn on and the
radio will turn on.
When the
/button is pushed while another
audio source is pla\bing, the another audio source will
turn off and the radio will turn on.
\fo change the radio bands, push the
/button
until the desired band (FM1, FM2, or AM) is displa\bed.
\fhe FM stereo indicator, “S\f” will displa\b during FM
stereo reception. When the stereo broadcast signal is
weak, the radio will automaticall\b change from stereo
to monaural reception.
TUNE/FF·REW/FOLDER button:
When adjusting the broadcasting station frequenc\b
manuall\b, push the
orbutton until the desired
frequenc\b is achieved.
When adjusting the broadcasting station frequenc\b
automaticall\b, push the
orbutton. When the
s\bstem detects a broadcasting station, it will stop at
the station.
SEEK UP/DOWN button:
When adjusting the broadcasting station frequenc\b
automaticall\b, push the
button. When the
s\bstem detects a broadcasting station, it will stop at
the station.
button:
When the
button is pushed, the s\bstem will seek
and stop at the detected broadcasting station for 5
seconds, and then it will start to seek for the next
broadcasting station.
Push the
button in this 5-second period to stop
seeking.
Radio memory button:
\fhe audio s\bstem can store up to 12 FM station
frequencies (for FM1 and FM2) and 6 AM station
frequencies.
\fo store the station frequenc\b:
1. \fune to the desired broadcasting station fre- quenc\b b\b using the
orbutton.
2. Push and hold a memor\b button (1 - 6) until a beep sounds.
3. \fhe switch number and frequenc\b will appear on the displa\b when the memor\b is stored properl\b.
4. Perform steps 1 - 3 for all other memor\b buttons.
Push a memor\b button (1 - 6) to select a desired
memor\b.
If the batter\b cable is disconnected, or if the audio fuse
blows, the radio memor\b will be erased. In such a case,
reset the desired stations.
(Automatic Preset) button:
\fhe audio s\bstem can store up to 6 FM station
frequencies and 6 AM station frequencies.
\fo store the station frequenc\b automaticall\b, push and
hold the
button until a beep sounds. \fhe station
will be automaticall\b stored in the “AU\fO.P” memor\b.
\fhe displa\b indicates “AP-**”.
Heater and air conditioner, and audio system4-23
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
RPT TRACK: The CD player plays the curre\ft track
co\fti\fuously\b
RPT ALL: All the tracks o\f the CD will be played i\f
seque\ftial order\b
MIX DISC: All the tracks o\f the CD will be played i\f a
ra\fdom order\b
CD EJECT button:
Whe\f the
butto\f is pushed while a CD is loaded,
the CD will be ejected\b
Whe\f the
butto\f is pushed twice, the CD will be
ejected further, a\fd the CD ca\f be removed with ease\b
If a CD is ejected by pushi\fg the
butto\f, a\fd it is
\fot take\f out from the loadi\fg slot, the CD will
automatically be reloaded to the slot to protect the CD\b
AUX button:
The AUX IN jack is located o\f the audio u\fit\b The AUX
IN audio i\fput jack accepts a\fy sta\fdard a\falog audio
i\fput such as from a portable cassette tape/CD player,
MP3 player, laptop computers, etc\b
Push the AUX butto\f to play a compatible device whe\f
it is plugged i\fto the AUX IN jack\b
CAUTION:
. Do not allow the cable or an external device
connected to the AUX terminal to affect your
driving.
. Connect a stereo mini-plug (3.5 mm in
diameter) cable to the AUX IN jack. If a
monaural mini-plug cable is used, the audio
will not output correctly.
WARNING:
.Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display.
. For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM radio operatio\f
JVH0004X
The audio system operates whe\f the ig\fitio\f switch is
i\f the “ACC” or “ON” positio\f\b
FM-AM button:
Whe\f the
butto\f is pushed while the audio
system is off, the audio system will tur\f o\f a\fd the
radio will tur\f o\f\b Whe\f the
butto\f is pushed
while CD is already operati\fg, it will automatically tur\f
off, a\fd the radio will tur\f o\f\b
To cha\fge the radio ba\fds, push the
butto\f u\ftil
the desired ba\fd appears\b
FM 1 ?FM 2 ?FM T ?MW ?LW
Duri\fg FM receptio\f, whe\f the
butto\f is pushed
for lo\fger tha\f 1\b5 seco\fds, statio\fs are searched for
a\fd the 6 statio\fs of the FM T ba\fd\b The sou\fd is
muted u\ftil the auto store operatio\f is completed,
upo\f which preset cha\f\fel 1 is automatically tu\fed i\f\b
TUNE button:
Whe\f adjusti\fg the broadcasti\fg statio\f freque\fcy
ma\fually, push the
butto\f u\ftil the desired
freque\fcy is achieved\b
The freque\fcy cha\fges i\f steps of 100 kHz o\f the FM
ba\fd, 9 kHz o\f the MW ba\fd, a\fd 3 kHz o\f the LW
ba\fd\b
SEEK button:
Whe\f adjusti\fg the broadcasti\fg statio\f freque\fcy
automatically, push the
butto\f\b Whe\f the
system detects a broadcasti\fg statio\f, it will stop at
the statio\f\b
Heater and air conditioner, and audio system4-27
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
MUTE button:
Press the
button to pause the track.
CD EJECT button:
To eject a CD\f push the CD EJECT
button.
When the
button \bs pushed tw\bce\f the CD w\bll be
ejected further\f and the CD can be removed w\bth ease.
If a CD \bs ejected by push\bng the
button\f and \bt \bs
not taken out from the load\bng slot\f the CD w\bll
automat\bcally be reloaded to the slot to protect the CD
(12 cm d\bscs only) .
AUX button:
The AUX IN jack \bs located on the aud\bo un\bt. The AUX
IN aud\bo \bnput jack accepts any standard analog aud\bo
\bnput such as from a portable cassette tape\f CD player\f
MP3 player or laptop computers.
Push the AUX button to play a compat\bble dev\bce when
\bt \bs plugged \bnto the AUX IN jack.
RENAULT strongly recommends us\bng a stereo m\bn\b
plug cable when connect\bng your mus\bc dev\bce to the
aud\bo system. Mus\bc may not play properly when a
monaural cable \bs used.
CAUTION:
Do not allow the cable or an external device
connected to the AUX terminal to affect your
driving.
WARNING:
. Depending on the external device, please
note that the volume may be louder or
quieter than that of the external device.
. When the AUX contacts with the plug of the
connector cable, noise may be heard.
. The connected exterior device cannot be
operated with the main audio system. The
volume and sound quality can be adjusted.
. The song title in the external device cannot
be displayed on the audio display.
. For the power source of the external device,
use the special battery. The external device
cannot be charged with the AUX terminal.
Noise may be heard if the CD, radio etc. is
operated while charging the battery with the
power socket of the vehicle.
FM-AM rad\bo operat\bon
JVH0012X
The aud\bo system operates when the \bgn\bt\bon sw\btch \bs
\bn the “ACC” or “ON” pos\bt\bon. Frequency range and step change (for Central/
South America):
To change the frequency range and step spec\bf\bcat\bon
of the rad\bo\f perform the follow\bng operat\bons.
1. Turn the aud\bo un\bt off by push\bng the POWER
button.
2. Turn the aud\bo un\bt on by push\bng the POWER button wh\ble push\bng the rad\bo memory buttons
and thebutton.
For Central/South Amer\bca spec\bf\bcat\bon\f the d\bsplay
\bnd\bcates “AM 530 kHz”.
For the other spec\bf\bcat\bon\f the d\bsplay \bnd\bcates “AM
531 kHz”.
If you exper\bence d\bff\bcult\bes \bn chang\bng rad\bo spec\b-
f\bcat\bon\f contact a RENAULT dealer.
button:
When the
button \bs pushed wh\ble the aud\bo
system \bs off\f the aud\bo system w\bll turn on and the
rad\bo w\bll turn on.
When the
button \bs pushed wh\ble another aud\bo
source \bs play\bng\f the another aud\bo source w\bll turn off
and the rad\bo w\bll turn on.
To change the rad\bo bands\f push the
button unt\bl
the des\bred band \bs d\bsplayed.
. AM?FM1 ?FM2
The FM stereo \bnd\bcator\f “ST” w\bll d\bsplay dur\bng FM
stereo recept\bon. When the stereo broadcast s\bgnal \bs
weak\f the rad\bo w\bll automat\bcally change from stereo
to monaural recept\bon.
Heater and air conditioner, and audio system4-33
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-50Heater and air conditioner, and audio system
2. Push and hold a radio memor\f button*1-*6until a beep sounds. \bThe radio mutes when the
memor\f button is pushed.)
3. The channel indicator will displa\f and the radio mute disengages, indicating that the memor\f is
stored properl\f.
4. Perform steps 1 - 3 for all other memor\f buttons.
If the batter\f cable is disconnected, or if the audio fuse
blows, the radio memor\f will be erased. If this occurs,
reset the desired stations.
USB memor\f device operation
Audio main operation:
The USB connector is located on the instrument panel.
For details, see “USB/AUX connector” \bP.4-55) .
Open the lid and connect a USB memor\f device into
the connector. The s\fstem will switch to the USB
memor\f device mode automaticall\f.
If the s\fstem is turned off while the USB memor\f
device is pla\fing, pushing the
dial will start the
USB memor\f device.
If the USB memor\f device cannot be pla\fed, one of the
following messages will be displa\fed.
. “USB memor\f device not supported”
. “No audio file detected”
WARNING:
Do not connect, disconnect or operate the USB
device while driving. Doing so can be a distrac-
tion. If distracted you could lose control of your
vehicle and cause an accident or serious injury.
CAUTION:
.Do not force the USB device into the USB
port. Inserting the USB device tilted or up-
side-down into the port may damage the
port. Make sure that the USB device is
connected correctly into the USB port.
(Some USB devices come with a
mark as a guide. Make sure that the mark
is facing the correct direction before insert-
ing the device.)
. Do not grab the USB port cover (if equipped)
when pulling the USB device out of the port.
This could damage the port and the cover.
. Do not leave the USB cable in a place where
it can be pulled unintentionally. Pulling the
cable may damage the port.
Refer to \four device manufacturer’s owner information
regarding the proper use and care of the device.
AUX button:
To operate the USB memor\f device use one of the
following methods:
. Push the
button then turn the TUNE/MENU/
ENTER dial to select the USB item. Once high-
lighted, push the TUNE/MENU/ENTER dial.
. Push the
button repeatedl\f until USB is
highlighted, and then push the TUNE/MENU/
ENTER dial.
Operation buttons:
The following operations are identical to the audio main
operation of the Compact Disc \bCD) operation. For
details, see “CD pla\fer operation” \bP.4-48) . .
List view
. Quick search
.
. MIX \bRandom pla\f)
. RPT \bRepeat track)
. Folder browsing
DISP button:
While a track with recorded music information tags
\bID3-tags) is being pla\fed, the title of the pla\fed track
is displa\fed. If the tags are not provided, a notification
message is displa\fed.
When the
button is pushed repeatedl\f, further
information about the track can be displa\fed along
with the track title as follows:
Track time ?Artist ?Album ?Folder name ?Track
time
Track details:
B\f pushing and holding the
button the displa\f will
show a detailed overview and after a few seconds it
will return to the main displa\f. Push the
button
briefl\f to return to the main displa\f immediatel\f.
iPod pla\fer operation
Connecting iPod:
The USB connector is located on the instrument panel.
For details, see “USB/AUX connector” \bP.4-55) . Open
the USB connector lid and connect the iPod cable to
the USB connector. The batter\f of the iPod is charged
while the device is connected to the vehicle.
Depending on the version of the iPod, the displa\f on
the iPod shows a RENAULT or Accessor\f Attached
screen when the connection is completed. When the
iPod is connected to the vehicle, the iPod music librar\f
can onl\f be operated b\f the vehicle audio controls.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
* iPod and iPhone are trademarks of Apple In\f.,
registered in the \b.S. and other \fountries.
WARNING:
Do not connect, disconnect or operate the USB
device while driving. Doing so can be a distrac-
tion. If distracted you could lose control of your
vehicle and cause an accident or serious injury.
CAUTION:
.Do not force the USB device into the USB
port. Inserting the USB device tilted or up-
side-down into the port may damage the
port. Make sure that the USB device is
connected correctly into the USB port.
(Some USB devices come with a
mark as a guide. Make sure that the mark
is facing the correct direction before insert-
ing the device.)
. Do not grab the USB port cover (if equipped)
when pulling the USB device out of the port.
This could damage the port and the cover.
. Do not leave the USB cable in a place where
it can be pulled unintentionally. Pulling the
cable may damage the port.
Refer to your devi\fe manufa\fturer’s owner information
regarding the proper use and \fare of the devi\fe.
Compatibility:
The following models are supported:
. Third generation iPhone (Firmware version
IOS4/4.0)
. Fourth generation iPhone (Firmware version
IOS4/4.0) .
Fifth generation iPod (Firmware version 1.3)
. First generation iPod Classi\f (Firmware version
1.1.1 or 1.1.2PC)
. Se\fond generation iPod Classi\f (Firmware ver-
sion 2.0.1)
. First generation iPod tou\fh (Firmware version
1.1.5 or 2.2.1)
. Se\fond and third generation iPod tou\fh (Firm-
ware version 2.2.1 or IOS4/4.0.0)
. First generation iPod nano (Firmware version
1.3.1)
. Se\fond generation iPod nano (Firmware version
1.1.3)
. Third generation iPod nano (Firmware version
1.1.2PC or 1.1.3PC)
. Fourth generation iPod nano (Firmware version
1.0.2 or 1.0.4)
. Fifth generation iPod nano (Firmware version 1.0.1
or 1.0.2)
The iPod tou\fh may not respond qui\fkly to the system
in some \fases.
Make sure that the iPod firmware is updated.
Operating tips:
. iPod Shuffle and iPod mini are not supported.
. Some iPod operations may not be available with
this system.
AUX button:
To operate the iPod use one of the following methods:
. Push the
button and then turn the T\bNE/
MEN\b/ENTER dial for the \bSB item. On\fe
highlighted, push the T\bNE/MEN\b/ENTER dial. .
Push the
button repeatedly until \bSB is
highlighted and then push the T\bNE/MEN\b/
ENTER dial.
Operation buttons:
Interfa\fe:
The interfa\fe for iPod operation shown on the audio
system display is similar to the iPod interfa\fe. \bse the
T\bNE/MEN\b/ENTER dial to play a tra\fk on the iPod.
The following items \fan be \fhosen from the menu list
s\freen.
. Playlists
. Artists
. Albums
. Tra\fks
. Genres
For further information about ea\fh item, see the iPod
owner’s manual.
The following operations are identi\fal to the audio main
operation of the Compa\ft Dis\f (CD) operation. For
details, see “CD player operation” (P.4-48) .
. List view
. Qui\fk sear\fh
.
. MIX (Random play)
. RPT (Repeat tra\fk)
. Folder browsing
DISP button:
While a tra\fk with re\forded musi\f information tags
(ID3-tags) is being played, the title of the played tra\fk
is displayed. If the tags are not provided then a
notifi\fation message is displayed.
When the
button is pushed repeatedly, further
Heater and air conditioner, and audio system4-51
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
4-56Heater and air conditioner, and audio system
When installing a CB, ham ra\fio or a car phone in \bour
vehicle, be sure to observe the following cautions,
otherwise the new equipment ma\b a\fversel\b affect the
Engine Control S\bstem an\f other electronic parts.
CAUTION:
.Keep the antenna as far away as possible
from the Electronic Control Module.
. Keep the antenna wire at least 20 cm (8 in)
away from the Engine Control harnesses. Do
not route the antenna wire next to any
harnesses.
. Adjust the antenna standing wave ratio as
recommended by the manufacturer.
. Connect the ground wire from the radio
chassis to the body.
. For details, consult a RENAULT dealer.
WARNING:
.Use a phone after stopping your vehicle in a
safe location. If you have to use a phone
while driving, exercise extreme caution at all
times so full attention may be given to
vehicle operation.
. If a conversation in a moving vehicle re-
quires you to take notes, pull off the road to
a safe location and stop your vehicle before
doing so.
CAUTION:
To avoid draining the vehicle battery, use a
phone after starting the engine.
For mo\fel with navigation s\bstem, see the separatel\b
provi\fe\f Navigation Owner’s Manual.
Your vehicle is equippe\f with the Bluetooth
ŠHan\fs-
Free Phone S\bstem. If \bou are an owner of a
Bluetooth
Šenable\f cellular phone, \bou can set up
the wireless connection between \bour cellular phone
an\f the in-vehicle phone mo\fule. With Bluetooth
Š
wireless technolog\b, \bou can make or receive a han\fs-
free telephone call with \bour cellular phone in the
vehicle.
Once \bour cellular phone is paire\f to the in-vehicle
phone mo\fule, no other phone connecting proce\fure
is require\f. Your phone is automaticall\b connecte\f with
the in-vehicle phone mo\fule when the ignition switch
is place\f in the “ON” position with the paire\f cellular
phone turne\f on an\f carrie\f in the vehicle.
You can register up to 5 \fifferent Bluetooth
Šcellular
phones to the in-vehicle phone mo\fule. However, \bou
can talk on onl\b one cellular phone at a time.
Before using the Bluetooth
ŠHan\fs-Free Phone S\bstem, refer to the following notes.
.
Set up the wireless connection between a cellular
phone an\f the in-vehicle phone mo\fule before
using the s\bstem.
. Some Bluetooth
Šenable\f cellular phones ma\b not
be recognize\f b\b the in-vehicle phone mo\fule.
. You will not be able to use a han\fs-free phone
un\fer the following con\fitions.
— Your vehicle is outsi\fe of the telephone service
area.
— Your vehicle is in an area where it is \fifficult to receive ra\fio waves; such as in a tunnel, in an
un\fergroun\f parking garage, near a tall buil\f-
ing or in a mountainous area.
— Your cellular phone is locke\f to prevent it from being \fiale\f.
When the ra\fio wave con\fition is not i\feal or ambient
soun\f is too lou\f, it ma\b be \fifficult for the other part\b
to hear \bour voice \furing a call. Please close the
win\fows if possible.
Do not place the cellular phone in an area surroun\fe\f
b\b metal or far awa\b from the in-vehicle phone mo\fule
to prevent tone qualit\b \fegra\fation an\f wireless
connection \fisruption.
While a cellular phone is connecte\f through the
Bluetooth
Šwireless connection, the batter\b power of
the cellular phone ma\b \fischarge quicker than usual.
The Bluetooth
ŠHan\fs-Free Phone S\bstem cannot
charge cellular phones.
Refer to the cellular phone Owner’s Manual regar\fing
the telephone charges, cellular phone antenna an\f
bo\f\b, etc.
This wireless han\fs-free s\bstem is base\f on Blue-
tooth
Štechnolog\b.
CAR PHONE OR CB RADIO Bluetooth
ŠHANDS-FREE PHONE
SYSTEM (if equipped for model
without navigation system)
&RQGLWLRQ