2012 RENAULT PULSE oil temperature


> (GLW    0RGHO .$2(0B5HQDXOW @
2-14Instruments and controls
CAUTION:
Do not continue driving if the alternator belt is
loose, broken or missing.
Door open warning light (if e\fuipped)
\bhen the ignition switch is in the “ON” position, the
door open warning light illuminates if any of the doors
are open or not closed securely.
Electric power steering warning light
\bhen the ignition switch is in the “ON” position, the
electric power steering warning light illuminates. After
starting the engine, the electric power steering warning
light turns off. This indicates the electric power
steering system is operational.
If the electric power steering warning light illuminates
while the engine is running, it may indicate the electric
power steering system is not functioning properly and
may need servicing. Have the electric power steering
system checked by a RENAULT dealer.
\bhen the electric power steering warning light
illuminates with the engine running, the power assist
to the steering will cease operation but you will still
have control of the vehicle. At this time, greater
steering efforts are re\fuired to operate the steering
wheel, especially in sharp turns and at low speeds.
(See “Electric power steering system” (P.5-35) .)
Engine oil pressure warning light
\bhen the ignition switch is in the “ON” position, the
engine oil pressure warning light illuminates. After
starting the engine, the engine oil pressure warning
light turns off. This indicates that the oil pressure
sensors in the engine are operational.
If the engine oil pressure warning light illuminates or
blinks while the engine is running, it may indicate that
the engine oil pressure is low.
Stop the vehicle safely as soon as possible. Stop the
engine immediately and call a RENAULT dealer.
CAUTION:
.Running the engine with the engine oil
pressure warning light illuminated could
cause serious damage to the engine.
. The engine oil pressure warning light is not
designed to indicate a low oil level. The oil
level should be checked using the dipstick.
(See “Engine oil” (P.8-10) .)
High temperature warning light (red)
\bhen the ignition switch is in the “ON” position, the
high temperature warning light illuminates and then
turns off. This indicates that the high temperature
sensor in the engine coolant system is operational.
CAUTION:
If the high temperature warning light illuminates
while the engine is running, it may indicate the
engine temperature is extremely high.
Stop the vehicle safely as soon as possible. If the vehicle is overheated, continuing vehicle
operation may seriously damage the engine.
(See “If your vehicle overheats” (P.6-10) for the
immediate action required.)
Intelligent Key system warning light (if
e\fuipped)
After the ignition switch is placed in the “ON” position,
this light comes on for about 2 seconds and then turns
off.
This light illuminates or blinks as follows:
. The light blinks in yellow when the door is closed
with the Intelligent Key left outside the vehicle and
the ignition switch in the “ACC” or “ON” position.
Make sure that the Intelligent Key is inside the
vehicle (for model without vehicle information
display) .
. The light blinks in green when the Intelligent Key
battery is running out of power. Replace the
battery with a new one (for model without vehicle
information display) . See “Battery” (P.8-23) .
. The light illuminates in yellow when it warns of a
malfunction with the electrical steering lock
system or the Intelligent Key system.
If the warning light illuminates in yellow while the
engine is stopped, it may be impossible to free the
steering lock or to start the engine. If the light comes
on while the engine is running, you can drive the
vehicle. However in these cases, contact a RENAULT
dealer for repair as soon as possible.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
UNDERBODY
In areas where road sal\f is used in \fhe win\fer, i\f is
ne\bessary \fo \blean \fhe vehi\ble’s underbody regularly in
order \fo preven\f dir\f and sal\f from building up and
\bausing \fhe a\b\belera\fion of \borrosion on \fhe under-
body and suspension.
Before \fhe win\fer and again in \fhe spring, \fhe under-
seal mus\f be \bhe\bked and, if ne\bessary, re-\frea\fed.
WHEELS
.Wash \fhe wheels when washing \fhe vehi\ble \fo
main\fain \fheir appearan\be.
. Clean \fhe inner side of \fhe wheels when \fhe wheel
is \bhanged or \fhe underside of \fhe vehi\ble is
washed.
. Do no\f use abrasive \bleaners when washing \fhe
wheels.
. Inspe\b\f wheel rims regularly for den\fs or \borrosion.
This may \bause loss of pressure or damage \fhe
\fire bead.
. RENAULT re\bommends \fha\f \fhe road wheels be
waxed \fo pro\fe\b\f agains\f road sal\f in areas where
i\f is used during win\fer.
ALUMINUM ALLOY WHEELS
Wash \fhe wheels regularly wi\fh a sponge dampened in
a mild solu\fion, espe\bially during win\fer in areas where
road sal\f is used.
The sal\f residue from road sal\f \bould dis\bolor \fhe
wheels if i\f is no\f washed off regularly.
CAUTION:
Follow the directions below to avoid staining or
discoloring the wheels: .
Do not use a cleaner that uses strong acid or
alkali contents to clean the wheels.
. Do not apply wheel cleaners to the wheels
when they are hot. The wheel temperature
should be the same as ambient temperature.
. Rinse the wheel to completely remove the
cleaner within 15 minutes after the cleaner is
applied.
CHROME PARTS
Clean all \bhrome par\fs regularly wi\fh a nonabrasive
\bhrome polish \fo main\fain \fhe finish. O\b\basionally remove loose dus\f from \fhe in\ferior \frim,
plas\fi\b par\fs and sea\fs using a va\buum \bleaner or sof\f
bris\fled brush. Wipe \fhe vinyl and lea\fher surfa\bes wi\fh
a \blean, sof\f \blo\fh dampened in mild soap solu\fion,
\fhen wipe \blean wi\fh a dry, sof\f \blo\fh.
Regular \bare and \bleaning is required in order \fo
main\fain \fhe appearan\be of \fhe lea\fher.
Before using any fabri\b pro\fe\b\for, read \fhe manufa\b-
\furer’s re\bommenda\fions. Some fabri\b pro\fe\b\fors
\bon\fain \bhemi\bals \fha\f may s\fain or blea\bh \fhe sea\f
ma\ferial.
Use a sof\f \blo\fh dampened only wi\fh wa\fer \fo \blean \fhe
me\fer and gauge lens \bovers.
CAUTION:
.
Never use benzine, thinner or any similar
material.
. Small dirt particles can be abrasive and
damaging to leather surfaces and should be
removed promptly. Do not use saddle soap,
car waxes, polishes, oils, cleaning fluids,
solvents, detergents or ammonia-based
cleaners as they may damage the leather
natural finish.
. Never use fabric protectors unless recom-
mended by the manufacturer.
. Do not use glass or plastic cleaner on meter
or gauge lens covers. It may damage the
lens covers.
Appearance and care7-3
CLEANING INTERIOR
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Tires*:
Check the pressure with a gauge often and alwa\fs
prior to long distance trips. If necessar\f, ad\bust the
pressure in all tires, including the spare, to the
pressure specified. Check carefull\f for damage, cuts
or excessive wear.
Tire rotation*:
Tires should be rotated ever\f 10,000 km (6,000
miles) . However, the timing for tire rotation ma\f var\f
according to \four driving habits and the road surface
conditions.
Wheel alignment and balance (for Europe):
If the vehicle should pull to either side while driving on
a straight and level road, or if \fou detect uneven or
abnormal tire wear, there ma\f be a need for wheel
alignment.
If the steering wheel or seat vibrates at normal highwa\f
speeds, wheel balancing ma\f be needed.
Windshield:
Clean the windshield on a regular basis. Check the
windshield at least ever\f six months for cracks or other
damage. Have a damaged windshield repaired b\f a
qualified repair facilit\f.
Wiper blades*:
Check for cracks or wear if the\f do not wipe properl\f.
Inside vehicle
The maintenance items listed here should be checked
on a regular basis, such as when performing periodic
maintenance, cleaning the vehicle, etc.Accelerator pedal:
Check the pedal for smooth operation and make sure
that the pedal does not catch or require uneven effort.
Keep the floor mats awa\f from the pedal.
Brake pedal*:
Check the pedal for smooth operation and make sure
that it has the proper distance under it when
depressed full\f. Check the brake booster function.
Keep the floor mats awa\f from the pedal.
Parking brake*:
Check that the pedal/lever has the proper distance of
travel.
Seat belts:
Check that all parts of the seat belt s\fstem (for
example, buckles, anchors, ad\busters and retractors)
operate properl\f and smoothl\f, and that the\f are
installed securel\f. Check the belt webbing for cuts,
fra\fing, wear or damage.
Steering wheel:
Check for changes in the steering conditions, such as
excessive free pla\f, hard steering or strange noises.
Warning lights and chimes:
Make sure that all warning lights and chimes are
operating properl\f.
Windshield defogger:
Check that the air comes out of the defogger outlets
properl\f and in good quantit\f when operating the
heater or air conditioner.
Windshield wiper and washer*:
Check that the wipers and washer operate properl\f
and that the wipers do not streak.
Under hood and vehicle
The maintenance items listed here should be checked
periodicall\f (for example, each time \fou check the
engine oil or refuel) .
Battery*:
Check the fluid level in each cell. It should be between
the UPPER and LOWER levels. Vehicles operated in
high temperatures or under severe conditions require
frequent checks of the batter\f fluid level.
Brake and clutch fluid level*:
Make sure that the brake and clutch fluid level is
between the MAX and MIN lines on the reservoir.
Engine coolant level*:
Check the coolant level when the engine is cold.
Engine drive belts*:
Make sure the drive belts are not fra\fed, worn, cracked
or oil\f.
Engine oil level*:
Check the level on the dipstick after parking the vehicle
on a level surface and turning off the engine.
Fluid leaks:
Check under the vehicle for fuel, oil, water or other fluid
leaks after the vehicle has been parked for a while.
Water dripping from the air conditioner after use is
normal. If \fou should notice an\f leaks or if fuel fumes
are evident, check for the cause and have it corrected
immediatel\f.
Maintenance and do-it-yourself8-3
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
8-12Maintenance and do-it-yourself
JVM0001XHR15DE engine model1. Oil filler cap
2. Oil \frain plug
\b. Oil filter
1. Park the vehicle on a level surface an\f apply the parking brake.
2. Start the engine an\f warm it up until the engine temperature reaches the normal operating tem-
perature (approximately 5 minutes) .
\b. Stop the engine.
4. Wait at least 10 minutes for the engine oil to \frain back to the oil pan. 5. Place a large \frain pan un\fer the \frain plug.
6. Remove the \frain plug with a wrench.
7. Remove the oil filler cap an\f completely \frain the
oil.
If the oil filter is to be change\f, remove an\f
replace it at this time. (See “Engine oil filter
replacement (HR12DDR, HR12DE an\f HR15DE
engine mo\fels)” (P.8-12) .)
8. Clean an\f reinstall the \frain plug an\f new washer. Securely tighten the \frain plug with a wrench. Do
not use excessive force.
Drain plug tightening torque:29 to 39 N·m
(3.0 to 4.0 kg-m, 22 to 29 ft-lb)
9. Refill the recommen\fe\f engine oil an\f quantity. (See “Recommen\fe\f fuel/lubricants an\f capaci-
ties” (P.9-2) .)
When filling the engine oil, do not remove
the dipstick.
10. Securely install the oil filler cap.
11. Start the engine.
12. Check the \frain plug for any sign of leakage.
1\b. Check the engine oil level accor\fing to the proper proce\fure. (See “Checking engine oil level” (P.8-
10) .)
Engine oil filter replacement (HR12DDR,
HR12DE an\f HR15DE engine mo\fels)
JVM0059XHR12DDR engine model
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
FUEL RECOMMENDATION
Gasoli\fe e\fgi\fe (\bodel with three–way
catalyst)
CAUTION:
Do not use leaded gasoline. Using leaded gaso-
line will damage the three-way catalyst.
Except for Europe, Thaila\fd a\fd Chi\fa: Use UN-
LEADED REGULAR gasoli\fe of at least 91 octa\fe
(RON) .
For Europe: Use UNLEADED PREMIUM gasoli\fe of at
least 95 octa\fe (RON) .
If u\fleaded pre\biu\b gasoli\fe is \fot used, UNLEADED
REGULAR gasoli\fe with a\f octa\fe rati\fg of at least 91
(RON) \bay be used at slightly reduced perfor\ba\fce.
However, for \baxi\bu\b vehicle perfor\ba\fce a\fd the
best driveability, the use of u\fleaded pre\biu\b gasoli\fe
is reco\b\be\fded.
For Thaila\fd: Use UNLEADED REGULAR gasoli\fe or
gasohol (up to E20*) of at least 91 octa\fe (RON) .
*: Gasohol is alcohol ble\fded gasoli\fe. For exa\bple,
“E20” is a \bixture of approxi\bately 20% fuel etha\fol
a\fd 80% u\fleaded gasoli\fe.
For Chi\fa: Use UNLEADED REGULAR gasoli\fe of at
least 93 octa\fe (RON) .
Your vehicle co\bplies with GB18352.3-2005. Use
u\fleaded gasoli\fe with a\f octa\fe rati\fg 93 (RON) or
above a\fd \fatio\fal III or IV e\bissio\f sta\fdard
co\bplia\ft. If other types of gasoli\fe are used, it will
reduce the perfor\ba\fce of the vehicle’s e\bissio\f
co\ftrol syste\b a\fd the Malfu\fctio\f I\fdicator Light
(MIL) will illu\bi\fate.
Diesel e\fgi\fe*
Diesel fuel of at least 50 ceta\fe*
If two types of diesel fuel are available, use su\b\ber or wi\fter
fuel properly accordi\fg to the followi\fg te\bperature co\fdi-
tio\fs.
. Above í78C (208F) ... Su\b\ber type diesel fuel.
. Below í78C (208F) ... Wi\fter type diesel fuel.
CAUTION:
.Do not use home heating oil, gasoline or
other alternate fuels in your diesel engine.
The use of those or adding those to diesel
fuel can cause engine damage.
. Do not use summer fuel at temperatures
below í78C (208F) . The cold temperatures
will cause wax to form in the fuel. As a
result, it may prevent the engine from
running smoothly.
RECOMMENDED SAE VISCOSITY NUM-
BER
Gasoli\fe e\fgi\fe oil
STI0732
For Europe (HR12DDR engine model):
5W-30 is preferable.
If 5W-30 is not available, select the viscosity,
from the chart, that is suitable for the outside
temperature range.
Technical information9-3
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
9-4Technical information
For Europe (HR12DE engine model) and Thai-
land:
0W-20 is preferable.
If 0W-20 is not available, select the viscosity,
from the chart, that is suitable for the outside
temperature range.
Except for Europe and Thailand:
10W-30 is preferable.
If 10W-30 is not available, select the viscosity,
from the chart, that is suitable for the outside
temperature range.Diesel engine oil
JVT0029X
5W-30 is preferable.
If 5W-30 is not available, select the viscosity,
from the chart, that is suitable for the outside
temperature range.
AI\f CONDITION\b\f SYST\bM \f\bF\fIG\b\f-
ANT AND LUB\fICANT
The air conditioner system of your vehicle must be
charged with the refrigerant HFC-134a (\f134a) and
the lubricant approved by our technical department or
equivalents. Use of any other refrigerants or lubricants
will cause severe damage, and you may need to
replace your vehicle’s entire air conditioner system.
The release of refrigerants into the atmosphere is
prohibited in many countries and regions. The refrig-
erant HFC-134a (\f-134a) in your vehicle will not harm
the \barth’s ozone layer. However, it may contribute in a
small part to the global warming effect. \f\bNAULT
recommends that the refrigerant be appropriately
recovered and recycled. Contact a \f\bNAULT dealer
when servicing the air conditioner system.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
RECOMMENDED FUEL
Gasoline engine \fmodel wi\bh \bhree–way
ca\balys\b)
CAUTION:
Do not use leaded gasoline. Using leaded gaso-
line will damage the three-way catalyst.
Excep\b for Europe, Thailand and China: Use UN-
LEADED REGULAR gasoline of a\b leas\b 91 oc\bane
\fRON) .
For Europe: Use UNLEADED PREMIUM gasoline of a\b
leas\b 95 oc\bane \fRON) .
If unleaded premium gasoline is no\b used, UNLEADED
REGULAR gasoline wi\bh an oc\bane ra\bing of a\b leas\b 91
\fRON) may be used a\b sligh\bly reduced performance.
However, for maximum vehicle performance and \bhe
bes\b driveabili\by, \bhe use of unleaded premium gasoline
is recommended.
For Thailand: Use UNLEADED REGULAR gasoline or
gasohol \fup \bo E20*) of a\b leas\b 91 oc\bane \fRON) .
*: Gasohol is alcohol blended gasoline. For example,
“E20” is a mix\bure of approxima\bely 20% fuel e\bhanol
and 80% unleaded gasoline.
For China: Use UNLEADED REGULAR gasoline of a\b
leas\b 93 oc\bane \fRON) .
Your vehicle complies wi\bh GB18352.3-2005. Use
unleaded gasoline wi\bh an oc\bane ra\bing 93 \fRON) or
above and na\bional III or IV emission s\bandard
complian\b. If o\bher \bypes of gasoline are used, i\b will
reduce \bhe performance of \bhe vehicle’s emission
con\brol sys\bem and \bhe Malfunc\bion Indica\bor Ligh\b
\fMIL) will illumina\be.
Diesel engine*
Diesel fuel of a\b leas\b 50 ce\bane* If \bwo \bypes of diesel fuel are available, use summer or win\ber fuel properly according \bo \bhe
following \bempera\bure condi\bions.
. Above í78C \f208F) ... Summer \bype diesel fuel.
. Below í78C \f208F) ... Win\ber \bype diesel fuel.
CAUTION:
.Do not use home heating oil, gasoline or
other alternate fuels in your diesel engine.
The use of those or adding those to diesel
fuel can cause engine damage.
. Do not use summer fuel at temperatures
below í78C (208F) . The cold temperatures
will cause wax to form in the fuel. As a
result, it may prevent the engine from
running smoothly.
RECOMMENDED ENGINE OIL
See “Recommended fuel/lubrican\bs and capaci\bies”
\fP.9-2) .
Gasoline engine
For Europe and Sou\bh Africa:
. For engine oil, refer \bo \bhe main\benance service
documen\b for your vehicle.
. API grade SL or SM
. ILSAC grade GF-3 or GF-4
. ACEA A1/B1, A3/B3, A3/B4, A5/B5, C2 or C3
Excep\b for Europe and Sou\bh Africa:
. For engine oil, refer \bo \bhe main\benance service
documen\b for your vehicle. .
API grade SJ, SL or SM
. ILSAC grade GF-2, GF-3 or GF-4
Diesel engine
.For engine oil, refer \bo \bhe main\benance service
documen\b for your vehicle.
. ACEA B1/B5
TIRE COLD PRESSURE
See \bhe \bire placard affixed \bo \bhe driver’s side cen\ber
pillar.
GAS STATION INFORMATION
&RQGLWLRQ

- At least 30% of kilometers covered towing a trailer weighting more than 500 Kg,
- Driving in a dusty environment (building site, more than 1000 Km of trails per year,
OperationsFrequencyChange engine oil, oil filter, air filter, fuel filter, cabin filter, belts
and rollers (accessory and timing) (1) (2)Halve the kilometer frequency for recommended
replacement in normal conditions of use,
For the following certain condition of use:
At least 50% of journeys with the engine running at idle speed, halve, as well, the time frequency replacement for
oil and oil filter.
(1) The certain condition of use “driving in a dusty environment” does not modify the replacement frequency for belts
(accessories and timing) as recommended replacement in normal condition of use.
(2) The damper pulleys for certain engines must be replaced during this operation. For more information, please
consult your Renault representative.
B) – Use of engine oil* (for petrol and diesel engines without particles filter), which don’t correspond to
RENAULT recommendations, (check maintenance pages), – Prolonged use (+ 5000 Km / year) in temperatures bellow -15°C,
– Use of fuels that don’t correspond to RENAULT recommendations, (See User Manual booklet).
* For diesel engines with Particles Filter, the use of an other engine oil than the one recommended by RENAULT
may damage the Particles Filter
Operation Frequency
Change engine oil, oil filter Halve the kilometer frequency for recommended
replacement in normal conditions of use,
C) – Four wheels drive vehicles (4WD): Prolonged use in rough driving conditions (trails, heavy rains…), in very
For the following certain condition of use:
At least 50% of journeys with the engine running at idle speed, halve, as well, the time frequency replacement
for oil and oil filiter.
Operations Frequency
Change engine oil, oil filter, air filter, fuel filter, cabin
filter, belts and rollers (accessory and timing) (1) (2)Halve the kilometer frequency for recommended
replacement in normal conditions of use,
Operations Frequency
Change engine oil, oil filter Halve the kilometer frequency for recommended
replacement in normal conditions of use,