2012 RENAULT PULSE lock


> (GLW    0RGHO .$2(0B5HQDXOW @
3-12Pre-driving checks and adjustments
.When the Intelligent Key is placed inside of
the glove box.
. When the Intelligent Key is placed inside of
the door pockets.
. When the Intelligent Key is placed on or
under the spare tire area.
. When the Intelligent Key is placed inside or
near metallic materials.
The lockout protection may function when the
Intelligent Key is outside the vehicle but is too
close to the vehicle.
Unlocking doors
All door unlock:
1. Carry \fhe In\felligen\f \bey wi\fh you.
2. Push \fhe door handle reques\f swi\fch
*Aor back
door reques\f swi\fch*B.
3. All doors and \fhe back door will be unlocked.
4. The hazard indica\for flashes \fwice.
If a door handle is pulled while unlocking \fhe doors,
\fha\f door may no\f be unlocked. Re\furning \fhe door
handle \fo i\fs original posi\fion will unlock \fhe door. If \fhe
door does no\f unlock, af\fer re\furning \fhe door handle,
push \fhe door handle reques\f swi\fch \fo unlock \fhe
door.
Selective door unlock mode:
1. Carry \fhe In\felligen\f \bey wi\fh you.
2. Push \fhe door handle reques\f swi\fch (driver’s or fron\f passenger’s)
*Aor back door reques\f
swi\fch*B.
3. The corresponding door will be unlocked. 4. Push \fhe door handle reques\f swi\fch (driver’s or
fron\f passenger’s)
*Aor back door reques\f
swi\fch*Bagain wi\fhin 5 seconds.
5. All doors will be unlocked.
Switching door unlock mode (if equipped) :
To swi\fch \fhe door unlock mode from one \fo ano\fher,
see “Using remo\fe keyless en\fry sys\fem” (P.3-7) .
Automatic relock:
All doors will be locked au\foma\fically unless one of \fhe
following opera\fions is performed wi\fhin 30 seconds
af\fer pushing \fhe reques\f swi\fch while \fhe doors are
locked.
. Opening any doors.
. Pushing \fhe igni\fion swi\fch.
If during \fhe prese\f \fime period \fhe “UNLOC\b”
bu\f\fon on \fhe In\felligen\f \bey is pushed, all doors will be
locked au\foma\fically af\fer \fhe nex\f prese\f \fime.
BATTERY SAVER SYSTEM
When all \fhe following condi\fions are me\f for a period
of \fime, \fhe ba\f\fery saver sys\fem will cu\f off \fhe power
supply \fo preven\f ba\f\fery discharge.
. The igni\fion swi\fch is in \fhe “ACC” posi\fion, and
. All doors are closed, and
. The selec\for lever is in \fhe “P” (Park) posi\fion
(Au\foma\fic \fransmission/Con\finuously Variable
Transmission model) .
WARNING AND AUDIBLE REMINDERS
The In\felligen\f \bey sys\fem is equipped wi\fh a func\fion
\fha\f is designed \fo minimize improper opera\fions of \fhe
In\felligen\f \bey and \fo help preven\f \fhe vehicle from
being s\folen.
Type A (model wi\fh vehicle informa\fion dis-
play)
The warning buzzer sounds and \fhe warning display
appears on \fhe do\f ma\frix display (in \fhe vehicle
informa\fion display) when improper opera\fions are
de\fec\fed. See \fhe \froubleshoo\fing guide on \fhe nex\f
page. For warning and indica\fors on \fhe vehicle
informa\fion display, see “Vehicle informa\fion display”
(P.2-20) .
CAUTION:
When the buzzer sounds and the warning
display appears, be sure to check both the
vehicle and the Intelligent Key.
Type B (model wi\fhou\f do\f ma\frix display)
A chime or beep sounds inside and ou\fside \fhe vehicle
and a warning ligh\f illumina\fes or blinks.
See \fhe \froubleshoo\fing guide on \fhe nex\f page and
“Warning/indica\for ligh\fs and audible reminders” (P.2-
12) .
In\felligen\f \bey sys\fem warning ligh\f:
P posi\fion selec\fing warning ligh\f:
CAUTION:
When the chime or beep sounds or the warning
light illuminates or blinks, be sure to check both
the vehicle and the Intelligent Key.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-14Pre-driving checks and adjustments
SymptomPossible cause\fction to take
W\ben pus\bing t\be request switc\b or t\be
“LOCK”
button on t\be Intelligent
Key to lock t\be door T\be outside c\bime sounds for a few
seconds and all t\be doors unlock.T\be Intelligent Key is inside t\be ve\bicle. Carry t\be Intelligent Key wit\b you.
T\be ignition switc\b is in t\be “\fCC” or
“ON” position.
Pus\b t\be ignition switc\b to t\be “OFF”
position.
\f door is not closed securely. Close t\be door securely.
W\ben pus\bing t\be door \bandle request
switc\b to lock t\be door T\be outside c\bime sounds for a few
seconds.T\be Intelligent Key is inside t\be ve\bicle. Carry t\be Intelligent Key wit\b you.
\f door is not closed securely.
Close t\be door securely.
W\ben pus\bing t\be ignition switc\b to start
t\be engine Type \f: T\be Intelligent Key battery
indicator appears on t\be display.
Type B: T\be Intelligent Key system
warning lig\bt in t\be meter blinks in green.
T\be battery c\barge is low.
Replace t\be battery wit\b a new one. (See
“Battery” (P.8-23) .)
Type \f: T\be NO KEY warning appears on
t\be display and t\be inside warning c\bime
sounds for a few seconds.
Type B: T\be Intelligent Key system
warning lig\bt in t\be meter blinks in yellow
and t\be inside warning c\bime sounds for
a few seconds. T\be Intelligent Key is not in t\be ve\bicle.
Carry t\be Intelligent Key wit\b you.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
USING REMOTE KEYLESS ENTRY FUNC-
TION
Oper\ftin\b r\fn\be
SPA2252Type A (with panic alarm)
SPA2045Type B (without panic alarm)It is possible to lock/unlock \fll doors includin\b the b\fck
door usin\b the remote keyless entry system. The
oper\ftin\b dist\fnce depends upon the conditions
\fround the vehicle. To securely oper\fte the lock \fnd
unlock buttons, \fppro\fch the vehicle to \fbout 1 m (3.3
ft) from the door.
The remote keyless entry system will not function under
the followin\b conditions:.
When the Intelli\bent Key is not within the
oper\ftion\fl r\fn\be.
. When the Intelli\bent Key b\fttery is disch\fr\bed.
For inform\ftion re\b\frdin\b the repl\fcement of \f b\fttery,
see “B\fttery” (P.8-23) .
Lockin\b doors
When you lock or unlock the doors includin\b the b\fck
door, the h\fz\frd indic\ftor will fl\fsh \fs \f confirm\ftion.
1. Pl\fce the i\bnition switch in the “OFF” position \fnd c\frry the Intelli\bent Key.
2. Close \fll doors (includin\b the b\fck door) .
3. Push the “LOCK”
button*1on the
Intelli\bent Key.
4. All doors will be locked.
5. Oper\fte the door h\fndles to confirm th\ft the doors h\fve been securely locked.
CAUTION:
After locking the doors using the Intelligent Key,
be sure that the doors have been securely
locked by operating the door handles.
Unlockin\b doors
1. Push the “UNLOCK”button*2on the
Intelli\bent Key.
2. All doors (includin\b the b\fck door) will be unlocked.
All doors will be locked \futom\ftic\flly unless one of the
followin\b oper\ftions is performed within 30 seconds
\ffter pushin\b the “UNLOCK”
button on the
Intelli\bent Key while the doors \fre locked. If durin\b this
30-second time period, the “UNLOCK”
button on
the Intelli\bent Key is pushed, \fll doors will be locked
\futom\ftic\flly \ffter \fnother 30 seconds. .
Openin\b \fny door or b\fck door.
. Pushin\b the i\bnition switch.
Selecting door unlock mode (if equipped) :
When you first receive the vehicle, the door unlock
mode is set to unlock \fll the doors with one push of the
“UNLOCK”
button*2. The door unlock mode
c\fn be switched to the selective door unlock mode,
which unlocks the p\fssen\ber’s doors \ft the second
push of the “UNLOCK”
button*2
Selective door unlock mode:
1. Push the “UNLOCK”
button*2on the
Intelli\bent Key.
2. The driver’s door unlocks.
3. Push the “UNLOCK”
button*2on the
Intelli\bent Key \f\b\fin.
4. All doors will be unlocked.
To switch to the selective door unlock mode, perform
the followin\b procedure.
Push the “LOCK”
\fnd “UNLOCK”buttons
simult\fneously for more th\fn 5 seconds. Perform the
s\fme procedure to de\fctiv\fte the selective door
unlock mode.
. When the selective door unlock mode is set, the
h\fz\frd indic\ftor fl\fshes 3 times.
. When the \fll door unlock mode is set, the h\fz\frd
indic\ftor fl\fshes once.
Pre-driving checks and adjustments3-15
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-16Pre-driving checks and adjustments
Using panic alarm (if eq\fipped)
If \bo\f are near \bo\fr vehicle and feel threatened, \bo\f
ma\b activate the alarm to call attention as follows:
1. P\fsh the “PANIC”
b\ftton*3on the
Intelligent Ke\b for more than 0.5 second.
2. The theft warning alarm will sta\b on for 25 seconds.
3. The panic alarm stops when:
. It has r\fn for 25 seconds, or
. An\b of the b\fttons on the Intelligent Ke\b are
p\fshed. (Note: Panic b\ftton sho\fld be p\fshed for
more than 0.5 second.)
Hazard indicator operation
When \bo\f lock or \fnlock the doors, the hazard
indicator will flash as a confirmation.
.“LOCK”: The hazard indicator flashes once.
. “UNLOCK”: The hazard indicator flashes twice. Yo\fr vehicle is eq\fipped with either or both of the
following sec\frit\b s\bstems:
.
Theft warning s\bstem
. Anti-Theft S\bstem*
(* immobilizer)
The sec\frit\b condition will be shown b\b the sec\frit\b
indicator light.
THEFT WARNING SYSTEM
The theft warning s\bstem provides vis\fal and a\fdio
alarm signals if parts of the vehicle are dist\frbed.
Sec\frit\b indicator light
SIC2045
The sec\frit\b indicator light is located in the meter
panel.
This light operates whenever the ignition switch is in
the “ACC”, “OFF” or “LOCK” position. This is normal.
How to activate the system:
1. Close all windows and p\fsh the ignition switch to the “OFF” position.
The system can be activated even if the
windows are open. 2. Carr\b the Intelligent Ke\b with \bo\f and get o\ft of
the vehicle.
3. Make s\fre the hood is closed. Close and lock all doors with the door handle req\fest switch, LOCK
b\ftton*1on the Intelligent Ke\b (If the door
is locked \fsing the inside lock knob, the s\bstem
will not be activated) or power door lock switch (If
the door is locked \fsing the power door lock
switch with all the doors closed, the s\bstem will
not be activated. To activate the s\bstem, lock the
door \fsing the power door lock switch with an\b of
the doors open, then close all the doors) .
4. Confirm that the sec\frit\b indicator light comes on. The sec\frit\b indicator light sta\bs on for approxi-
matel\b 30 seconds. The vehicle sec\frit\b s\bstem is
now pre-armed. After approximatel\b 30 seconds
the vehicle sec\frit\b s\bstem a\ftomaticall\b shifts
into the armed phase. The sec\frit\b light begins to
flash once ever\b approximatel\b 3 seconds.
If, d\fring this 30-second pre-arm time period, the
door is \fnlocked with the door handle req\fest
switch, the “UNLOCK”
b\ftton*2on the
Intelligent Ke\b, the power door lock switch, or the
ignition switch is p\fshed to the “ACC” or “ON”
position, the s\bstem will not arm.
Even when the driver and/or passengers are in
the vehicle, the system will activate with all
doors locked and ignition switch in the “LOCK”
position. Push the ignition switch to the “ACC” or
“ON” position to turn the system off.
Theft warning system operation:
The warning s\bstem will give the following alarm:
. The hazard indicator blinks and the horn so\fnds
intermittentl\b for approximatel\b 30 seconds.
SECURITY SYSTEM (if equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
.The alarm automatically turns off after approxi-
mately \f0 seconds. \bowever, the alarm reacti-
vates if the vehicle is tampered with again.
The alarm is activated by:
. Operating the door without using the Intelligent
Key system.
. Opening the hood.
How to stop alarm:
. The alarm will stop by unlocking a door with the
door handle request switch or “UNLOCK”
button*2on the Intelligent Key.
. The alarm will stop when the ignition switch is
pushed to the “ACC” or “ON” position.
If the system does not operate as described
above, have it checked by a RENAULT dealer.
ANTI-T\bEFT SYSTEM
The Anti-Theft System will not allow the engine to start
without the use of the registered Anti-Theft System
key.
If the engine does not start using the registered Anti-
Theft System key, it may be due to interference caused
by:
. Another Anti-Theft System key.
. Automated toll road device.
. Automated payment device.
. Other devices that transmit similar signals.
Start the engine using the following procedure:
1. Remove any items that may be causing the interference away from the Anti-Theft System key.
2. Leave the ignition switch in the “ON” position for approximately 5 seconds.
\f. Turn the ignition switch to the “OFF” or “LOCK” position, and wait approximately 10 seconds. 4. Repeat steps 2 and \f again.
5. Start the engine.
6. Repeat the steps above until all possible inter-
ferences are eliminated.
If this procedure allows the engine to start, RENAULT
recommends placing the registered Anti-Theft System
key separate from other devices to avoid interference.
FCC WARNING:
Changes or modifications not expressly ap-
proved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions; (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation of the
device.
Security indicator light
SIC2045
The security indicator light is located on the meter
panel. It indicates the status of Anti-Theft System.
The light operates whenever the ignition switch is in the “LOCK”, “OFF” or “ACC” position. The security
indicator light indicates that the security systems on
the vehicle are operational.
If Anti-Theft System is malfunctioning, this light will
remain on while the ignition switch is in the “ON”
position.
If the light remains on and/or the engine does
not start, contact a RENAULT dealer for Anti-
Theft System service as soon as possible. Be
sure to bring all Anti-Theft System keys that you
have when visiting a RENAULT dealer for service.
For Right-Hand Drive (RHD) model (for Europe):
If Anti-Theft System is malfunctioning, the security
indicator light will illuminate when the ignition switch is
in the “ON” position. \bowever, if the security indicator
light turns off after 15 minutes, you can start the engine
once. See a RENAULT dealer for Anti-Theft System
service as soon as possible.
Pre-driving checks and adjustments\f-17
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
WARNING:
Make sure the back door has been closed
securely to prevent it from opening while driving.
Do not drive with the back door open. This could
allow dangerous exhaust gases to be drawn into
the vehicle.
OPENING BACK DOOR
JVP0091X
F\fr m\fd\bl with th\b d\f\fr k\by cylind\br
Th\b back d\f\fr can b\b \fp\bn\bd by pulling th\b \fp\bn\br
handl\b and pulling up th\b back d\f\fr.
T\f cl\fs\b th\b back d\f\fr, pull d\fwn until it s\bcur\bly
l\fcks.
F\fr m\fd\bl with\fut th\b d\f\fr k\by cylind\br
T\f \fp\bn th\b back d\f\fr, unl\fck it with \fn\b \ff th\b
f\fll\fwing \fp\brati\fns, th\bn pull th\b handl\b.
.Push th\b back d\f\fr r\bqu\bst switch (if \bquipp\bd) .
(S\b\b “Int\bllig\bnt K\by syst\bm” (P.3-9) .)
. Push th\b “UNLOCK” butt\fn \fn th\b Int\bllig\bnt K\by
(if \bquipp\bd) . (S\b\b “Int\bllig\bnt K\by syst\bm” (P.3-
9) .) .
Push th\b “UNLOCK” butt\fn \fn th\b r\bm\ft\b
c\fntr\fll\br (if \bquipp\bd) . (S\b\b “R\bm\ft\b k\byl\bss
\bntry syst\bm” (P.3-7) .)
. Push th\b p\fw\br d\f\fr l\fck switch t\f th\b “UN-
LOCK” p\fsiti\fn.
L\fcking with k\by (f\fr m\fd\bl with th\b d\f\fr k\by
cylind\br)
JVP0096X
T\f l\fck th\b back d\f\fr, push it d\fwn firmly, ins\brt th\b
k\by t\f th\b d\f\fr k\by cylind\br and turn th\b k\by cl\fckwis\b
*1. T\f unl\fck th\b back d\f\fr, turn th\b k\by c\funt\br-
cl\fckwis\b*2.
WARNING:
. Fuel is extremely flammable and highly
explosive under certain conditions. You
could be burned or seriously injured if it is
misused or mishandled. Always stop the
engine and do not smoke or allow open
flames or sparks near the vehicle when
refueling.
. Fuel may be under pressure. Turn the cap a
half of a turn, and wait for any “hissing”
sound to stop to prevent fuel from spraying
out and possibly causing personal injury.
Then remove the cap.
. Use only an original equipment type fuel
filler cap as a replacement. It has a built-in
safety valve needed for proper operation of
the fuel system and emission control sys-
tem. An incorrect cap can result in a serious
malfunction and possible injury.
OPENING FUEL FILLER LID
SPA2336
T\f \fp\bn th\b fu\bl fill\br lid, pull th\b fu\bl fill\br lid r\bl\bas\b
handl\b.
Pre-driving checks and adjustments3-19
BACK DOOR
FUEL FILLER LID
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-20Pre-driving checks and adjustments
FUEL FILLER CAP
SPA1755
Th\f fu\fl f\bll\fr cap \bs a ratch\ft\bng typ\f. Turn th\f cap
count\frclockw\bs\f*1to r\fmov\f. T\bght\fn th\f cap
clockw\bs\f*2unt\bl ratch\ft cl\bcks, mor\f than tw\bc\f,
aft\fr r\ffu\fl\bng.
CAUTION:
If fuel is spilled on the vehicle body, flush it away
with water to avoid paint damage.
WARNING:
Never adjust the steering wheel while driving so
that full attention may be given to vehicle
operation.
JVP0092X
Wh\bl\f push\bng th\f lock l\fv\fr down*1, adjust th\f
st\f\fr\bng wh\f\fl up or down*2unt\bl th\f d\fs\br\fd
pos\bt\bon \bs ach\b\fv\fd.
Pull th\f lock l\fv\fr up
*3f\brmly to lock th\f st\f\fr\bng
wh\f\fl \bn plac\f.
WARNING:
Adjust the position of all mirrors before driving.
Do not adjust the mirror positions while driving
so that full attention may be given to vehicle
operation.
INSIDE REARVIEW MIRROR
SPA2447
Wh\bl\f hold\bng th\f \bns\bd\f r\farv\b\fw m\brror, adjust th\f
m\brror angl\fs unt\bl th\f d\fs\br\fd pos\bt\bon \bs ach\b\fv\fd.
SPA2143
Pull th\f adjust\bng l\fv\fr*1(\bf \fqu\bpp\fd) wh\fn th\f
glar\f from th\f h\fadl\bghts of th\f v\fh\bcl\f b\fh\bnd you
obstructs your v\bs\bon at n\bght.
STEERING WHEEL MIRRORS
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-22Pre-driving checks and adjustments
Remote control type (if equipped) :
The outside rearview mirror remote contro\f operates
when the ignition switch is in the “\bCC” or “ON”
position.
The outside rearview mirrors automatica\f\fy fo\fd when
the outside rearview mirror fo\fding switch is pushed to
the “CLOSE” position
*1. To unfo\fd, push to the
“OPEN” position*2.
CAUTION:
. Continuously performing the fold/unfold
operation of the outside rearview mirror
may cause the switch to stop the operation.
. Do not touch the mirrors while they are
moving. Your hand may be pinched, and the
mirror may malfunction.
. Do not drive with the mirrors stored. You will
be unable to see behind the vehicle.
. If the mirrors were folded or unfolded by
hand, there is a chance that the mirror will
move forward or backward during driving. If
the mirrors were folded or unfolded by hand,
be sure to adjust them again electrically
before driving.
JVC0025X
Automatic folding function with interlocking
door lock (if equipped):
The outside rearview mirrors fo\fd automatica\f\fy by
inter\focking door \fock. The function can be used whi\fe
the switch is in the “\bUTO” position
*2.
. The outside rearview mirrors fo\fd automatica\f\fy
when the door is \focked by the door hand\fe
request switch or the remote key\fess entry system.
. The outside rearview mirrors unfo\fd when the
ignition switch is p\faced in the “\bCC” or “ON”
position.
CAUTION:
When the outside rearview mirror is folded/
unfolded manually, the mirror may fold/unfold
accidentally while driving. Be sure to fold/unfold
the outside rearview mirror by an electrical
operation after folding/unfolding manually.
WARNING:
.When the outside rearview mirror is folded/
unfolded manually, depending on the switch
position, the outside rearview mirror may
start operation by turning the ignition switch
to the “ACC” or“ON” position.
. When unfolding the outside rearview mirror
with the switch being in the “AUTO” position,
the mirror will be unfolded further by turning
the ignition switch to the “ACC” or“ON”
position.
To return its original position, fold the out-
side rearview mirror once.
The outside rearview mirror remote contro\f operates
when the ignition switch is in the "\bCC" or "ON" position.
The outside rearview mirrors automatica\f\fy fo\fd when
the outside rearview mirror fo\fding switch is pushed to
the "CLOSE" position
*1. To unfo\fd, push to the
"\bUTO" position*2.
CAUTION:
Continuously performing the fold/unfold opera-
tion of the outside rearview mirror may cause
the switch to stop the operation.
Manual control type (if equipped) :
SP\b1829
Fo\fd the outside rearview mirror by pushing it toward
the rear of the vehic\fe.
&RQGLWLRQ