front seat adjustmentmanual controls .............................. (up to the end of the DU)
1.16
ENG_UD1743_1
Sièges avant à commandes manuelles (X81 - Renault)
ENG_NU_932-3_X81ph3_Renault_1
frOnT sea Ts WITH ManUaL cOnTrOL
To move forwards or backwards
Lift lever 1 to unlock the seat. When the
seat is in the required position, release
the lever and ensure that the seat is
locked in place.
To tilt the seatback
Lift lever 4 and tilt the seatback to the
desired position.
To adjust the lumbar support on the
driver’s seat:
Pull handle 2.To adjust the driver’s seat height:
Move lever 3 as many times as neces-
sary:
– upwards to raise the seat,
– downwards to lower the seat.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
We would advise you not
to recline the seatbacks too
far to ensure that the effec-
tiveness of the seat belts is
not reduced.
Make sure that the seatbacks are
locked in place correctly.
Nothing should be placed on the
floor (area in front of driver) as such
objects may slide under the pedal
during braking manoeuvres, thus
obstructing its use.
1
2
34
front seat adjustmentelectric controls ............................... (up to the end of the DU)
1.17
ENG_UD1744_1
Sièges avant à commandes électriques (X81 - Renault)
ENG_NU_932-3_X81ph3_Renault_1
frOnT sea Ts WITH eLecTrIc cOnTrOL
Switches 1 and 3 are the same shape
as the seat squab and seatback:
switch 1 is used for adjusting the seat
squab and switch 3 is used for adjust -
ing the seatback.
On equipped vehicles, button 2 is used
to store the chosen driving position. It
is possible to store a driving position
using the RENAULT Card.
The system operates:
– hands-free RENAULT card de -
tected or, depending on the vehicle,
RENAULT remote control in ‘acces-
sories’ position in the card reader;
– for vehicles with button 2 , this also
operates for about 40 minutes when
the driver’s door is opened and the
ignition is switched off.
adjusting the seat squab:
switch 1
– To move forwards
Move it forwards.
– To move backwards
Move it backwards.
– To raise
Lift the rear of the switch.
– To lower
Lower the rear of the switch.
adjusting the seatback:
switch 3
To tilt the seatback
Move the switch forward or backwards.
adjusting the lumbar support on the
driver’s seat
Pull handle 4.
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
We would advise you not
to recline the seatbacks too
far to ensure that the effec-
tiveness of the seat belts is
not reduced.
Make sure that the seatbacks are
locked in place correctly.
Nothing should be placed on the
floor (area in front of driver) as such
objects may slide under the pedal
during braking manoeuvres, thus
obstructing its use.
4
2
1
3
