96
!
Comfort
   
 
 
 
 
 
 
 
Mats Removable carpet protection. 
When 
fitting the mat for the first time, on the 
driver's side use only the fixings provided in the 
wallet attached.
The other mats are simply placed on the carpet.  
Fitting
Removal
To remove the mat on the driver's side: )move the seat as far back as possible, )unclip the fixings,  )remove the mat.
 
 
Refitting 
 
To refit the mat on the driver's side: ) 
  position the mat correctly,  ) 
  refit the fixings by pressing, ) 
  check that the mat is secured correctly.
To  a v o i d  a ny risk of jamming of thepedals:-  only use mats which are suited to the fixings already present in the vehicle; these fixings must be used, -   never fit one mat on top of another. The use of mats not approved byPEUGEOT may inter fere with access to the pedals and hinder the operation of the cruise control/speed limiter.
 )Lower the rear armrest for a more comfortable position.  
  It may be fitted with cup holders and also gives 
access to the ski flap. 
   
 
 
 
 
 
 
 
Rear armrest  
         
        
        3
99
!
Comfort
   
 
 
 
 
 
Fan cooling of the high voltage battery 
 
 
This system does not work continuously, 
but adapts the force of the fan cooling to the 
requirements of the battery. 
  Its operation can be heard at the rear, even if 
the vehicle is stopped after a run.
  If the air intake is blocked, the battery mayoverheat, damaging the battery and causing a 
loss of per formance of the hybrid system. The hi
gh voltage battery has an air coolingsystem, comprising an air intake (located on 
the rear shelf) and a fan (located behind the
boot trim).  
For the best use of the high voltage battery, please follow these recommendations: -  do not obstruct the air intake with loose ar ticles, other wise, thebattery may overheat, causing a loss of per formance of the hybrid system,-   do not spill fluids, as this may cause damage to the battery.