3-10 Features and controls
3
Additional remote control transmitters
N00543900065
To add a remote control transmitter, you must already have one
registered remote control transmitter.
Registering the ID code can be done by yourself or by a certi-
fied i-MiEV dealer. For you to register the ID code yourself,
follow the “Customer remote control transmitter program-
ming” procedure below.
If you choose to have a certified i-MiEV dealer register the ID
code, take your vehicle and all remaining keys to a certified i-
MiEV dealer.NOTEYou are provided with 2 remote control transmitters, but
you may register up to 4 remote control transmitters.General information
N00546100101
Your keyless entry system operates on a radio frequency sub-
ject to Federal Communications Commission (FCC) Rules
(For vehicles sold in U.S.A.) and Industry Canada Rules (For
vehicles sold in Canada). This device complies with Part 15 of
the FCC Rules and RSS-Gen of the Industry Canada Rules.
Operation is subject to the following two conditions.
This device may not cause harmful interference.
This device must accept any interference received, includ-
ing interference that may cause undesired operation.
Procedure for replacing the remote control trans-
mitter battery
N00544100110
1. Before replacing the battery, remove static electricity from
your body by touching a metal grounded object.
2. With the Mitsubishi mark facing up, insert the cloth-cov-
ered tip of a flat blade screwdriver into the notch in the
remote control transmitter case and use it to open the case.NOTEBe sure to perform the procedure with the Mitsubishi
mark facing up. If the Mitsubishi mark is not facing up
when you open the remote control transmitter case, the
buttons may come out.
CAUTION
!Changes or modifications not expressly approved by
the manufacturer for compliance could void the
user’s authority to operate the equipment.
BK0140800US.book 10 ページ ２０１１年９月２９日 木曜日 午後３時２８分
