2012 MITSUBISHI iMiEV display

Comfort controls
5-23
5
CD control panel and display
N00735300743
1- Disc loading slot
2- Eject button
3- CD (CD mode changeover) button
4- TRACK (Fast-forward/Track up) button
5- TRACK (Fast-reverse/Track down) button
6- CD indicator
7- SEL (Select mode) indicator
8- FOLDER indicator
9- TRACK indicator
10- Display
11- RDM/F-RDM indicator
1 2 - R PT / F - R PT i n d i c a t o r
13- SELECT knob
14- POWER (On-Off) button/PAGE (Title scroll) button
15- DISP (Title display) button
16- MENU button
17- SCAN button
18- SEEK (Up-seek) button/ (Return) button
19- SEEK (Down-seek) button/ (Select) button
BK0140800US.book 23 ページ ２０１１年９月２９日　木曜日　午後３時２８分

5-24 Comfort controls
5
To listen to a CD
N00735501074
To set a disc1. Press the POWER button until it beeps to turn the audio
system ON and OFF. The system turns on in the last mode
used.
2. Insert the disc with the label facing up.
When a disc is inserted, the CD indicator will come on
and the CD player will begin playing even if the radio is
being used. The CD player will also begin playing when
the CD button is pressed with a disc set in the CD player
or in the disc loading slot, even if the radio is being used.NOTE
For information concerning the adjustment of volume and
tone, refer to “To adjust the volume” on page 5-19 and
“To adjust the tone” on page 5-20.

8 cm compact disc cannot be played on this CD player.

For information concerning the handing of the compact
discs, refer to “Handling of compact discs” on page 5-38.To eject a discWhen the eject button is pressed, the disc automatically stops
and is ejected. The system automatically switches to radio
mode.NOTE
If you do not remove an ejected disc before 15 seconds
have elapsed, the disc will be reloaded.
To listen to a music CDPush the CD button if a disc is already in the CD player. The
audio system will enter CD mode and start playback. The track
number and the playing time will appear on the display. The
tracks in the disc will be played consecutively and continu-
ously.
BK0140800US.book 24 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Comfort controls
5-25
5
To listen to an MP3 CDThis CD player allows you to play MP3 (MPEG Audio Layer-
3) files recorded on CD-ROMs, CD-Rs (recordable CDs), and
CD-RWs (rewritable CDs) in ISO9660 Level 1/Level 2, Joliet,
and Romeo formats. Each disc may have a maximum of 16
trees, 100 folders and 255 files. During MP3 playback, the unit
can display ID3 tag information. For information concerning
ID3 tag, refer to “CD text and MP3 title display” on page 5-29.
Push the CD button if a disc is already in the CD player.
The display shows “READING”, then playback begins. The
folder number, the track number and the playing time will
appear on the display.
NOTE
While listening to a disc on which CD-DA (CD-Digital
Audio) and MP3 files have both been recorded, you can
switch between reading of the CD-DA, reading of the
MP3 files, and the external audio input mode by pressing
the CD button for 2 seconds or longer (until you hear a
beep).

With a disc that contains both CD-DA and MP3 files, the
CD-DA files are automatically played first.

The playback sound quality differs depending on the
encoding software and the bit rate. For details, refer to the
user manual of your encoding software.

Depending on file/folder configurations on a disc, it may
take some time before playback starts.

MP3 encode software and writing software are not sup-
plied with this unit.

You may encounter trouble in playing an MP3 or display-
ing the information of MP3 files recorded with certain
writing software or CD recorders (CD-R/RW drivers).

If you record too many folders or files other than MP3
onto a disc, it may take some time before playback starts.

This unit does not record MP3 files.

For information concerning CD-Rs/RWs, refer to “Notes
on CD-Rs/RWs” on page 5-40.
CAUTION
!
Attempting to play a file not in the MP3 format
which has the “.mp3” file name may produce noise
from the speakers and speaker damage, and can
damage your hearing.
BK0140800US.book 25 ページ ２０１１年９月２９日　木曜日　午後３時２８分

5-26 Comfort controls
5
Folder selection order/MP3 file playback order (Example)
To fast forward/reverse the discTo fast forward or fast reverse the disc, press the TRACK
button or the TRACK button.
Fast forward
You can fast-forward the disc by pressing the TRACK but-
ton. While the button is kept pressed, the disc will be fast-for-
warded.
Fast reverse
You can fast reverse the disc by pressing the TRACK but-
ton. While the button is kept pressed, the disc will be fast-
reversed.To select a desired trackYou can select your desired track by using the TRACK button.
Track up
Press the TRACK button repeatedly until the desired track
number appears on the display.
When listening to a MP3 CD, keep pressing the button to con-
tinue to move up tracks.
Track down
Press the TRACK button repeatedly until the desired track
number appears on the display.
When listening to a MP3 CD, keep pressing the button to con-
tinue to move down tracks.NOTE
Pressing the TRACK button once during the song will
cause the CD player to restart playback from the begin-
ning of the song.
Folder selection
In the order
File selection
In the order
Root folder (Root directory)
Tree 1 Tree 2 Tree 3 Tree 4
BK0140800US.book 26 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Comfort controls
5-27
5
To find a file (MP3 CDs only)Operate the following buttons or the SELECT knob to select
desired file.
When this mode is activated by pressing the button, the
SEL indicator will be displayed in the display.NOTE
If no operation is performed for 10 seconds or more or
other button is operated after the SELECT knob has been
turned, searching of the desired file is canceled.

If no operation is performed for 5 seconds or more after
the file is displayed, playback starts.

When the SEL indicator is not shown on the display and
the SELECT knob is operated, the volume adjustment is
effective.
To select the playing mode
N00771500013
1. Press the MENU button until beeps.
2. Press the SEEK / button repeatedly to select the
mode.
3. Press the MENU button until you hear a beep. The
selected mode will operate.
button: Press the button to start this mode or cancel
the selection.
SELECT knob : Turn the knob to show the folder or file.
button: Press the button to select the folder or file.
(MP3 CDs only)
(MP3 CDs only)
BK0140800US.book 27 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Comfort controls
5-29
5
To find the start of each track on a disc for playback
N00771900017
Press the SCAN button. “SCAN” will appear on the display
and the CD player will play back the first 10 seconds of each
track on the selected disc (music CDs only) or the currently
selected folder (MP3 CDs only).
The track number will blink while the scan mode is selected.
To stop the scan mode, press the SCAN button again.NOTE
Once all tracks on the disc (music CDs only) or the cur-
rently selected folder (MP3 CDs only) have been scanned,
playback of the disc will restart from the beginning of the
track that was playing when scanning started.

With a disc that contains both CD-DA and MP3 files, the
scan mode causes only files of the same format (CD-DA
only or MP3 files only) to be played.
CD text and MP3 title display
N00752100166
This audio system can display CD text and MP3 titles includ-
ing ID3 tag information.
CD text
The audio system can display disc and track titles for discs
with converted disc and track title information. Press the DISP
button repeatedly to make selections in the following sequence:
disc name → track name → normal display mode.NOTE
The display can show up to 11 characters. If a disc name
or track name has more than 11 characters, press the
PAGE button to view the next 11 characters.

When there is no title information to be displayed, the dis-
play shows “NO TITLE”.

Characters that the audio system cannot display are shown
as “ ”.
MP3 title
The audio system can display folder and track titles for discs
with converted folder and track information. Press the DISP
button repeatedly to make selections in the following sequence:
folder name → track name → normal display mode.
BK0140800US.book 29 ページ ２０１１年９月２９日　木曜日　午後３時２８分

5-30 Comfort controls
5
ID3 tag information
The audio system can display ID3 tag information for files that
have been recorded with ID3 tag information.
1. Press the DISP button for 2 seconds or longer to switch to
the ID3 tag information. “TAG” will appear on the dis-
play.
2. Press the DISP button repeatedly to make selections in the
following sequence: album name → track name → artist
name → normal display mode.NOTE
To return from ID3 tag information to the folder name,
press the DISP button again for 2 seconds or longer.

When there is no title information to be displayed, the dis-
play shows “NO TITLE”.

The display can show up to 11 characters. If a folder
name, track name, or item of ID3 tag information has
more than 11 characters, press the PAGE button to view
the next 11 characters.

Folder names, track names and ID3 tag information can
each be displayed up to a length of 32 characters.

Characters that the audio system cannot display are shown
as “ ”.
To play iPod/USB memory device tracks via
voice operation (vehicles with Bluetooth
®
2.0 interface)
N00772000015
Desired tracks can be selected and played from your iPod by
“Artist”, “Album”, “Playlist” and “Genre” using voice com-
mands.
For information concerning the voice recognition function or
speaker registration function, refer to “Bluetooth
® 2.0 inter-
face” on page 3-91.
The following explains how to prepare for voice operation and
play the tracks.
Preparation for voice operation
N00772100016
To use the voice operation, press the SPEECH button (1) first.
BK0140800US.book 30 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Comfort controls
5-35
5
To turn on the powerPress the power switch to turn on the power. When the power is
turned on, the last mode used before turning off is displayed.
To turn off the power, press and hold down the power switch
for about 2 seconds until you hear a beep.Vo l u m e c o n t r o lVolume up buttonWhile the button is pressed, the volume will continue to
increase.Volume down buttonWhile the button is pressed, the volume will continue to
decrease.Mode selectionPress the mode selector button to select the desired mode.
The mode changes in the following order.
AM → FM1 → FM2 → CD → USB or iPod* → Bluetooth
®*
→ AM
*: If you connect these devices.
To listen to the radioPress the mode selector button and select AM or FM mode.Automatic tuningSeek up button/Seek down button
After pressing one of these buttons, a receivable station will be
automatically selected and reception of the station will begin.
To listen to a CDPress the mode selector button and select CD mode.To fast forward/reverse the disc (music CDs only)To fast forward or fast reverse the disc, press the fast-forward
button or the fast-reverse button.
Fast forward
You can fast forward the disc by holding down the fast-forward
button. While the button is kept pressed, the disc will be fast-
forwarded.
Fast reverse
You can fast reverse the disc by holding down the fast-reverse
button. While the button is kept pressed, the disc will be fast-
reversed.NOTE
With an MP3 CD, you can fast forward and fast reverse
tracks in the same folder.
BK0140800US.book 35 ページ ２０１１年９月２９日　木曜日　午後３時２８分