Features and controls
3-7
3
General information
N00562300084
Your electronic immobilizer operates on a radio frequency sub-
ject to Federal Communications Commission (FCC) Rules
(For vehicles sold in U.S.A.) and Industry Canada Rules (For
vehicles sold in Canada). This device complies with Part 15 of
the FCC Rules and RSS-Gen of the Industry Canada Rules.
Operation is subject to the following two conditions.
This device may not cause harmful interference.
This device must accept any interference received, includ-
ing interference that may cause undesired operation.
This digital apparatus does not exceed the Class A limits for
radio noise emissions from digital apparatus set out in the
Radio Interference Regulations of the Canadian Department of
Communications.
Keyless entry system
N00509000907
Press the remote control transmitter buttons to lock or unlock
the doors and to open the liftgate.
It can also help you signal for attention by setting off the panic
alarm.
CAUTION
!Changes or modifications not expressly approved by
the manufacturer for compliance could void the
user’s authority to operate the equipment.
1-
LOCK ( ) button
2-
UNLOCK ( ) button
3- PANIC button
4- Indicator light
BK0140800US.book 7 ページ 2011年9月29日 木曜日 午後3時28分
3-8 Features and controls
3
To l o c k Press the LOCK button (1) to lock all the doors and the liftgate.
If the dome light switch is in the door position, the dome light
will blink once. The turn signal lights will also blink once. NOTEIf you press the LOCK button (1) after locking the doors
and the liftgate, the horn will sound once to confirm that
they are locked.To unlock Press the UNLOCK button (2) to unlock the driver’s door only.
Within about 2 seconds, press the UNLOCK button one more
time to unlock all the doors and the liftgate.
If the dome light switch is in the door position, the dome light
will turn on for about 30 seconds. The turn signal lights will
also blink twice.NOTEIf the UNLOCK button (2) is pressed and no door or
liftgate is opened within about 30 seconds, relocking will
automatically occur.
The door and liftgate unlock function can be set so that all
doors and liftgate unlock when the UNLOCK button (2) is
pressed once.
For details, please contact a certified i-MiEV dealer.Answerback function The keyless entry system answerback functions from the horn
can each be turned on or off as desired.
Horn deactivation/reactivationThe horn answerback function can be set to the following three
conditions.
Each time the horn answerback function is set, a chime will
sound to tell you the condition of the answerback function.
1. Remove the key from the electric motor switch.
2. Open the driver’s door and turn the combination head-
lights and dimmer switch to the “OFF” position.
3. Press the LOCK button (1) for 4 to 10 seconds and press
the UNLOCK button (2) during this time.
4. Release in sequence the UNLOCK and LOCK buttons
within 10 seconds of pressing the UNLOCK button in step
3.Changing the setting of the turn signal lights answer-
back functionThe turn signal lights answerback function can be changed.
If you want to change the answerback function, please contact
a certified i-MiEV dealer for details.Number of
chimes
Condition
One chime The horn will not sound.
Two chimes The horn will sound.
Three chimesThe horn will sound if the auto light switch is
ON (if so equipped).
Four chimesThe horn will sound if the LOCK button is
pressed twice quickly.
BK0140800US.book 8 ページ 2011年9月29日 木曜日 午後3時28分
3-10 Features and controls
3
Additional remote control transmitters
N00543900065
To add a remote control transmitter, you must already have one
registered remote control transmitter.
Registering the ID code can be done by yourself or by a certi-
fied i-MiEV dealer. For you to register the ID code yourself,
follow the “Customer remote control transmitter program-
ming” procedure below.
If you choose to have a certified i-MiEV dealer register the ID
code, take your vehicle and all remaining keys to a certified i-
MiEV dealer.NOTEYou are provided with 2 remote control transmitters, but
you may register up to 4 remote control transmitters.General information
N00546100101
Your keyless entry system operates on a radio frequency sub-
ject to Federal Communications Commission (FCC) Rules
(For vehicles sold in U.S.A.) and Industry Canada Rules (For
vehicles sold in Canada). This device complies with Part 15 of
the FCC Rules and RSS-Gen of the Industry Canada Rules.
Operation is subject to the following two conditions.
This device may not cause harmful interference.
This device must accept any interference received, includ-
ing interference that may cause undesired operation.
Procedure for replacing the remote control trans-
mitter battery
N00544100110
1. Before replacing the battery, remove static electricity from
your body by touching a metal grounded object.
2. With the Mitsubishi mark facing up, insert the cloth-cov-
ered tip of a flat blade screwdriver into the notch in the
remote control transmitter case and use it to open the case.NOTEBe sure to perform the procedure with the Mitsubishi
mark facing up. If the Mitsubishi mark is not facing up
when you open the remote control transmitter case, the
buttons may come out.
CAUTION
!Changes or modifications not expressly approved by
the manufacturer for compliance could void the
user’s authority to operate the equipment.
BK0140800US.book 10 ページ 2011年9月29日 木曜日 午後3時28分
Comfort controls
5-27
5
To find a file (MP3 CDs only)Operate the following buttons or the SELECT knob to select
desired file.
When this mode is activated by pressing the button, the
SEL indicator will be displayed in the display.NOTEIf no operation is performed for 10 seconds or more or
other button is operated after the SELECT knob has been
turned, searching of the desired file is canceled.
If no operation is performed for 5 seconds or more after
the file is displayed, playback starts.
When the SEL indicator is not shown on the display and
the SELECT knob is operated, the volume adjustment is
effective.
To select the playing mode
N00771500013
1. Press the MENU button until beeps.
2. Press the SEEK / button repeatedly to select the
mode.
3. Press the MENU button until you hear a beep. The
selected mode will operate.
button: Press the button to start this mode or cancel
the selection.
SELECT knob : Turn the knob to show the folder or file.
button: Press the button to select the folder or file.
(MP3 CDs only)
(MP3 CDs only)
BK0140800US.book 27 ページ 2011年9月29日 木曜日 午後3時28分
5-34 Comfort controls
5
6. After the voice guide says “Playing
creates an index for the genre.NOTEIf the confirmation function is active, the voice guide con-
firms if the genre is correct. If the genre is correct, say
“Yes”. If not, say “No”. After the voice guide says “Genre
not found, please try again,” the system returns to step 2.
Refer to “Confirmation function setting” on page 3-95.
7. The system exits the voice recognition mode and starts
playback.
Steering wheel audio remote control switch
(if so equipped)
N00714800471
The remote control switch is located on the left side of the
steering wheel.
It can be used when the electric motor switch is in the “ON” or
“ACC” position.NOTEDo not press multiple buttons at the same time when using
the steering wheel audio remote control switch.1- Volume up button
2- Volume down button
3- Power switch/Mode selector button
4- Seek up/Track up/File up/Fast-forward button
5- Seek down/Track down/File down/Fast-reverse button
BK0140800US.book 34 ページ 2011年9月29日 木曜日 午後3時28分
Comfort controls
5-35
5
To turn on the powerPress the power switch to turn on the power. When the power is
turned on, the last mode used before turning off is displayed.
To turn off the power, press and hold down the power switch
for about 2 seconds until you hear a beep.Vo l u m e c o n t r o lVolume up buttonWhile the button is pressed, the volume will continue to
increase.Volume down buttonWhile the button is pressed, the volume will continue to
decrease.Mode selectionPress the mode selector button to select the desired mode.
The mode changes in the following order.
AM → FM1 → FM2 → CD → USB or iPod* → Bluetooth
®*
→ AM
*: If you connect these devices.
To listen to the radioPress the mode selector button and select AM or FM mode.Automatic tuningSeek up button/Seek down button
After pressing one of these buttons, a receivable station will be
automatically selected and reception of the station will begin.
To listen to a CDPress the mode selector button and select CD mode.To fast forward/reverse the disc (music CDs only)To fast forward or fast reverse the disc, press the fast-forward
button or the fast-reverse button.
Fast forward
You can fast forward the disc by holding down the fast-forward
button. While the button is kept pressed, the disc will be fast-
forwarded.
Fast reverse
You can fast reverse the disc by holding down the fast-reverse
button. While the button is kept pressed, the disc will be fast-
reversed.NOTEWith an MP3 CD, you can fast forward and fast reverse
tracks in the same folder.
BK0140800US.book 35 ページ 2011年9月29日 木曜日 午後3時28分