2012 MITSUBISHI iMiEV warning light

3
Features and controls
Break-in recommendations . . . . . . . . . . . . . . . . . .3- 2
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3- 2
Electronic immobilizer
(Anti-theft starting system). . . . . . . . . . . . . . . . .3- 3
Keyless entry system . . . . . . . . . . . . . . . . . . . . . . .3- 7
Door locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3- 12
Power door locks . . . . . . . . . . . . . . . . . . . . . . . . . .3- 14
Child safety locks for rear door . . . . . . . . . . . . . . .3- 15
Liftgate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3- 16
Theft-alarm system . . . . . . . . . . . . . . . . . . . . . . . .3- 18
Power window control . . . . . . . . . . . . . . . . . . . . . .3- 22
Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3- 25
Inside rearview mirror . . . . . . . . . . . . . . . . . . . . . .3- 26
Outside rearview mirrors . . . . . . . . . . . . . . . . . . . .3- 28
Electric motor switch . . . . . . . . . . . . . . . . . . . . . . .3- 30
Steering wheel lock . . . . . . . . . . . . . . . . . . . . . . . .3- 32
Starting the electric motor unit. . . . . . . . . . . . . . . .3- 33
Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3- 33
Acoustic vehicle alerting system (AVAS) . . . . . . .3- 38
Service brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3- 39
Brake assist system . . . . . . . . . . . . . . . . . . . . . . . .3- 40
Anti-lock braking system . . . . . . . . . . . . . . . . . . . .3- 41
Electric power steering system (EPS) . . . . . . . . . .3- 44Active stability control (ASC). . . . . . . . . . . . . . . . 3- 46
Tire pressure monitoring system . . . . . . . . . . . . . . 3- 49
Rear-view camera (if so equipped) . . . . . . . . . . . . 3- 55
Instrument cluster . . . . . . . . . . . . . . . . . . . . . . . . . 3- 58
Indicator and warning light package . . . . . . . . . . . 3- 71
Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3- 72
Warning lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3- 73
Combination headlights and dimmer switch . . . . . 3- 76
Turn signal lever . . . . . . . . . . . . . . . . . . . . . . . . . . 3- 82
Hazard warning flasher switch . . . . . . . . . . . . . . . 3- 83
Front fog light switch (if so equipped) . . . . . . . . . 3- 83
Wiper and washer switch . . . . . . . . . . . . . . . . . . . 3- 84
Electric rear window defogger switch. . . . . . . . . . 3- 89
Horn switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3- 90
Link System (if so equipped) . . . . . . . . . . . . . . . . 3- 90
Bluetooth
® 2.0 interface (if so equipped) . . . . . . . 3- 91
USB input terminal (if so equipped) . . . . . . . . . . . 3- 117
Sun visors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3- 122
12 V power outlet . . . . . . . . . . . . . . . . . . . . . . . . . 3- 123
Interior lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3- 124
Storage spaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3- 128
Cup holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3- 130
Assist grip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3- 131
BK0140800US.book 1 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Features and controls
3-25
3 Parking brake
N00511400386
To park the vehicle, first bring it to a complete stop, fully
engage the parking brake, and set the selector lever to “P”
(PARK) position.To apply To release
When parking on a hill, apply the parking brake and turn the
front wheels toward the curb on a downhill grade, away from
the curb on an uphill grade.
1- Pull the lever up without pushing the button at the end of
hand grip.
When the parking brake is set and the electric motor switch
is in the “ON” position, the brake warning light in the instru-
ment cluster will come on.
Before driving, be sure to release the parking brake.
1- Pull the lever up slightly.
2- Press and hold the button at the end of the hand grip.
3- Push the lever downward.
CAUTION
!
Before driving, be sure that the parking brake is
fully released and brake warning light is off.
If a vehicle is driven without releasing the parking
brake, the brakes will be overheated, resulting in
ineffective braking and possible brake failure.
BK0140800US.book 25 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Features and controls
3-33
3 Starting the electric motor unit
N00571800014
1. Make sure all occupants are properly seated with seat
belts fastened.
2. Insert the key.
3. Make sure the parking brake is applied.
4. Press and hold the brake pedal down with your right foot.
5. Make sure the selector lever is in the “P” (PARK) posi-
tion.
6. Turn the key to the “ON” position and make certain that
all warning lights are functioning properly before starting
the electric motor unit.
7. Turn the key to the “START” position for one to two sec-
onds, and slowly return it to its original position. When
you hear the startup sound and the ready indicator comes
on, startup of the electric motor unit is complete.Electric motor reminderIf the driver’s door is opened while the key is in the “ON” posi-
tion, the electric motor reminder buzzer sounds intermittently
to remind the key is in the electric motor switch.
Transmission
N00513200203
Selector lever operation
N00513800371
CAUTION
!
Never attempt to start the electric motor unit by
pushing or pulling the vehicle.
While depressing the brake pedal, move the selector
lever through the gate.
Move the selector lever through the gate.
BK0140800US.book 33 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Features and controls
3-39
3 Service brake
N00517500305
Brake pedalOveruse of the brake can cause poor brake response and pre-
mature wear of the brake pads.
Power brakes
N00517600410
Your vehicle is equipped with power brakes for more braking
force with reduced brake pedal effort.
Your brakes are designed to operate at full capacity, even if the
power assist is lost.
If the power assist is lost, the effort needed to press the brake
pedal is greater.
If you should lose the power assist for some reason, the brakes
will still work.
If the power brake unit or either of the two brake hydraulic sys-
tems stop working properly, the rest of the brake system will
still work, but the vehicle will not slow down as quickly.
You will know this has happened if you find you need to
depress the brake pedal down further, or harder when slowing
down or stopping, or if the brake warning light comes on.
WA R N I N G
!
Do not leave any objects near the brake pedal or let
a floor mat slide under it; doing so could prevent the
full pedal stroke that would be necessary in an emer-
gency. Make sure that the pedal can be operated
freely at all times. Make sure the floor mat is
securely held in place.
CAUTION
!
It is important not to drive the vehicle with your foot
resting on the brake pedal when braking is not
required. This practice can result in very high brake
temperatures, premature pad wear, and possible
damage to the brakes.
WA R N I N G
!
Never turn off the electric motor switch while driv-
ing. Doing so will result in a loss of power assist for
the brakes and steering, increasing the effort
required to steer and brake the vehicle.
BK0140800US.book 39 ページ ２０１１年９月２９日　木曜日　午後３時２８分

3-42 Features and controls
3

An operation noise may be emitted from under the hood in
the following situations. The sound is associated with
checking the operations of the anti-lock braking system.
At this time, you may feel a shock from the brake pedal if
you depress it. These do not indicate a malfunction.
• When the electric motor switch is set to the “ON” posi-
tion.
• When the vehicle is driven for a while after the electric
motor is turned on.

The ABS can be used after the vehicle has reached a speed
over approximately 6 mph (10 km/h). It stops working
when the vehicle slows below approximately 3 mph (5
km/h).
Anti-lock braking system warning light
N00531600661
This light comes on in the event of a malfunction in the anti-
lock braking system. It will also come on as a self-check for a
few seconds when the electric motor switch is turned to the
“ON” position. Always make sure that the light goes out before
beginning to drive.
CAUTION
!
The anti-lock braking system cannot prevent acci-
dents. It is your responsibility to take safety precau-
tions and to drive carefully.
Be sure to use the specified type and size of tire on
all four wheels. Otherwise, the ABS may not work
properly.
Do not install any aftermarket limited slip differen-
tial (LSD) on your vehicle. The ABS may stop func-
tioning properly.
CAUTION
!
If the anti-lock braking system warning light comes
on and stays on after starting the electric motor unit
or while driving, it means that the anti-lock braking
system is not working and that only the standard
brake system is available. (The standard brake sys-
tem will still work properly.) If this happens, take
your vehicle to a certified i-MiEV dealer as soon as
possible.
BK0140800US.book 42 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Features and controls
3-43
3
If the warning light illuminates while driving
N00531700590
If only the ABS warning light illuminateAvoid hard braking and high-speed driving. Stop the vehicle in
a safe place, put the selector lever to the “P” (PARK) position
and turn off the electric motor unit.
Restart the electric motor unit and check to see whether the
light goes out after a few minutes driving; if it then remains off
during driving, there is no problem.
However, if the warning light does not disappear, or if it comes
on again when the vehicle is driven, we recommend you to
have the vehicle checked.If the ABS warning light and brake warning light illu-
minate at the same timeThe ABS and brake force distribution function may not work,
so hard braking could make the vehicle unstable.
Avoid hard braking and high-speed driving. Stop the vehicle in
a safe place and we recommend you to have the vehicle
checked.NOTE
The warning light may be illuminated when the electric
motor unit is started while the 12V starter battery voltage
is low, but this is not an ABS malfunction.
When the main drive lithium-ion battery is charged, the
12V starter battery is charged at the same time, and the
warning light will go out.
If the warning light does not go out or illuminates from
time to time even after the battery is charged, take your
vehicle to a certified i-MiEV dealer and have the system
checked as soon as possible.
After driving on snow or icy roads, remove any snow and
ice which may have been left around the wheels. On vehi-
cles that have an anti-lock braking system, be careful not
to damage the wheel speed sensors (A) or the cables
located at each wheel.
Front
BK0140800US.book 43 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Features and controls
3-45
3

If you turn the steering wheel while the vehicle is station-
ary with the headlights on, the headlights may become
dim. This behavior is not abnormal. The headlights will
return to their original brightness after a short while.Electric power steering system warning light
N00574400011
If there is a malfunction in the system, the warning light will
come on.
Under normal conditions, the warning light comes on when the
electric motor switch is turned to the “ON” position and goes
off a few seconds later.
If the warning light appears while driving
N00574500012
1. Stop the vehicle in a safe place, put the selector lever to
the “P” (PARK) position and turn off the electric motor
unit.
2. Restart the electric motor unit to check whether the warn-
ing light goes out; if it then remains off, there is no prob-
lem.
If the warning light does not go out, or it appears again
while driving, we recommend you to have your vehicle
inspected.
CAUTION
!
If the warning light appears during driving, it may
become harder to turn the steering wheel.
BK0140800US.book 45 ページ ２０１１年９月２９日　木曜日　午後３時２８分

3-46 Features and controls
3Active stability control (ASC)
N00559100163
The active stability control (ASC) takes overall control of the
anti-lock braking system, traction control function and skid
control function to help maintain the vehicle’s control. Also
refer to the following pages on the anti-lock braking system,
traction control function and skid control function.
Anti-lock braking system (ABS) → P. 3 - 4 1
Traction control function → P. 3 - 4 6
Skid control function → P. 3 - 4 7
NOTE
An operation noise may be emitted from under the hood in
the following situations. The sound is associated with
checking the operations of the ASC. At this time, you may
feel a shock from the brake pedal if you depress it. These
do not indicate a malfunction.
• When the electric motor switch is set to the “ON” posi-
tion.
• When the vehicle is driven for a while after the electric
motor unit is turned on.

When the ASC is activated, you may feel a vibration in
the vehicle body or hear a whining sound from under the
hood.
This indicates that the system is operating normally. It
does not indicate a malfunction.

When the anti-lock braking system warning light is illu-
minated, the ASC is not active.Traction control function
N00559200050
On slippery surfaces, the traction control function prevents the
drive wheels from spinning excessively, thus helping the vehi-
cle to start moving from a stopped condition. It also provides
sufficient driving force and steering performance as the vehicle
turns while pressing the acceleration pedal.
CAUTION
!
Do not over-rely on the ASC. Even the ASC cannot
prevent the natural laws of physics from acting on
the vehicle. This system, like any other system, has
limits and cannot help you to maintain traction and
control of the vehicle in all circumstances. Reckless
driving can lead to accidents. It is the driver’s
responsibility to drive carefully. This means taking
into account the traffic, road and environmental
conditions.
Be sure to use the specified type and size of tire on
all four wheels. Otherwise, the ASC may not work
properly.
Do not install any aftermarket limited slip differen-
tial (LSD) on your vehicle. The ASC may stop func-
tioning properly.
CAUTION
!
When driving a vehicle on a snowy or icy road, be
sure to install snow tires and drive the vehicle at
moderate speeds.
BK0140800US.book 46 ページ ２０１１年９月２９日　木曜日　午後３時２８分