2012 MITSUBISHI iMiEV headlights

Features and controls
3-45
3

If you turn the steering wheel while the vehicle is station-
ary with the headlights on, the headlights may become
dim. This behavior is not abnormal. The headlights will
return to their original brightness after a short while.Electric power steering system warning light
N00574400011
If there is a malfunction in the system, the warning light will
come on.
Under normal conditions, the warning light comes on when the
electric motor switch is turned to the “ON” position and goes
off a few seconds later.
If the warning light appears while driving
N00574500012
1. Stop the vehicle in a safe place, put the selector lever to
the “P” (PARK) position and turn off the electric motor
unit.
2. Restart the electric motor unit to check whether the warn-
ing light goes out; if it then remains off, there is no prob-
lem.
If the warning light does not go out, or it appears again
while driving, we recommend you to have your vehicle
inspected.
CAUTION
!
If the warning light appears during driving, it may
become harder to turn the steering wheel.
BK0140800US.book 45 ページ ２０１１年９月２９日　木曜日　午後３時２８分

3-58 Features and controls
3
NOTE
Mirror image is displayed on the screen.

Monitor brightness is adjusted automatically by sensors.

It is possible to change the display language of the screen.
For details, please refer to the separate owner’s manual for
“Mitsubishi Multi-Communication System”.

Under certain circumstances, it may become difficult to
see an image on the screen, even when the system is func-
tioning correctly.
• In a dark area, such as at night.
• When water drops or condensation are on the lens.
• When sunlight or headlights shine directly into the lens.
Instrument cluster
N00519000375
1- Energy level gauge
2- Energy usage indicator
3- Odometer/Trip odometer/Dash lights brightness indica-
tor/Service reminder/Cruising range indicator/Outside
temperature display
4- Speedometer
5- Reset button/Dash lights illumination button/Selector
button
BK0140800US.book 58 ページ ２０１１年９月２９日　木曜日　午後３時２８分

3-66 Features and controls
3
Dash lights brightness indicator
N00572600019
Each time you press the dash lights illumination button (B), the
brightness of the instruments changes.
NOTE
You can adjust to 4 different levels for when the parking
lights or headlights are illuminated and 4 for when they
are not.

If you press and hold the button for longer than about 1
second, the brightness automatically scrolls through its
different levels, and stops scrolling when you release the
button. Select your desired level of brightness.

When the combination headlights and dimmer switch is in
the “AUTO” position, the meter illumination switches
automatically to the adjusted brightness, depending on the
brightness outside the vehicle.

The brightness level of the instruments is stored when the
electric motor switch is turned off.

If the 12V starter battery is disconnected for a long time,
these level of brightness will be reset.
A- Brightness display
B- Dash lights illumination button
Bright Dim
BK0140800US.book 66 ページ ２０１１年９月２９日　木曜日　午後３時２８分

3-72 Features and controls
3Indicators
N00519900127
Turn signal indicators/Hazard warning lights
N00520000232
The arrows will flash in time with the corresponding exterior
turn signals when the turn signal lever is used.
Both arrows will flash when the hazard warning flasher switch
is pressed.NOTE
If the indicator flashes faster than usual or if the indicator
stays on without flashing, check for a malfunctioning turn
signal light bulb or turn signal connection.High beam indicator
N00520100086
A blue light comes on when the headlights are on high beam.Front fog light indicator
(if so equipped)
N00520200221
This indicator comes on while the front fog lights are on.Position indicator
N00551300039
This indicator turns on while the position lights are on.Ready indicator
N00573200012
This indicator comes on when the electric motor switch is
turned to “START” and driving becomes possible.
Charging indicator
N00573300013
This indicator flashes when the regular charging cable or quick
charging cable is connected.
After that, the light switches to being illuminated when charg-
ing starts and goes out when charging is completed.Regenerative brake system indicator
N00573400014
The indicator comes on when the regenerative brake perfor-
mance may be weakened. In this case, drive the vehicle at a
lower speed.
BK0140800US.book 72 ページ ２０１１年９月２９日　木曜日　午後３時２８分

3-76 Features and controls
3Combination headlights and dimmer switch
N00522500710
HeadlightsNOTE
Do not leave the headlights and other lights on for a long
period of time while the ready indicator is not illuminated.
A run down 12V starter battery could result.

When it rains, or when the vehicle has been washed, the
inside of the lens sometimes becomes foggy. This is the
same as when window glass mists up on a humid day, and
does not indicate a problem. When the light is switched
on, the heat will dry out the fog. However, if water col-
lects inside the light, have it checked by a certified
i-MiEV dealer.
Type 1Rotate the switch to operate the lights.
The combinations of switch operations and illuminated lights
differ in accordance with the following conditions.
Except for vehicles equipped with daytime running lights
OFF All lights off
Parking, tail, front and rear side-marker lights, license
plate and instrument panel lights on
Headlights and other lights on
BK0140800US.book 76 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Features and controls
3-77
3
Vehicles equipped with daytime running lights
[When the ready indicator is illuminated, and the parking brake
is released]
The daytime running lights will be illuminated:NOTE
Once the daytime running light come on, they do not go
out until the electric motor switch is turned to the
“LOCK” or “ACC” position.
[When the ready indicator is not illuminated, or when the ready
indicator is illuminated but the parking brake is not released]
The electric motor unit starts when the lights are off.
Type 2Rotate the switch to operate the lights.
The combinations of switch operations and illuminated lights
differ in accordance with the following conditions.
Except for vehicles equipped with daytime running lights

OFF The daytime running lights illuminated
The daytime running lights illuminated
Parking, tail, front and rear side-marker lights, license
plate and instrument panel lights on
Headlights and other lights on
OFF All lights off
Parking, tail, front and rear side-marker lights, license
plate and instrument panel lights on
Headlights and other lights on
OFF All lights off
AUTOHeadlights and other lights turn on and off automati-
cally in accordance with outside light level.
Parking, tail, front and rear side-marker lights, license
plate and instrument panel lights on
Headlights and other lights on
BK0140800US.book 77 ページ ２０１１年９月２９日　木曜日　午後３時２８分

3-78 Features and controls
3
Vehicles equipped with daytime running lights
[When the ready indicator is illuminated, and the parking brake
is released]
The daytime running lights will be illuminated:NOTE
Once the daytime running light come on, they do not go
out until the electric motor switch is turned to the
“LOCK” or “ACC” position.[When the ready indicator is not illuminated, or when the ready
indicator is illuminated but the parking brake is not released]
The electric motor unit starts when the lights are off.OFF The daytime running lights illuminated
AUTOThe daytime running lights illuminated
Headlights and other lights turn on and off automati-
cally in accordance with outside light level.
The daytime running lights illuminated
Parking, tail, front and rear side-marker lights, license
plate and instrument panel lights on
Headlights and other lights on
OFF All lights off
AUTOHeadlights and other lights turn on and off automati-
cally in accordance with outside light level.
Parking, tail, front and rear side-marker lights, license
plate and instrument panel lights on
Headlights and other lights on
BK0140800US.book 78 ページ ２０１１年９月２９日　木曜日　午後３時２８分

Features and controls
3-79
3
NOTE
The sensitivity of the automatic on/off control can be
adjusted.
For further information, please contact a certified i-MiEV
dealer.

Do not place anything on the sensor (A), and do not clean
with a glass cleaner. Clean only with clear water.

If the lights do not turn on or off with the switch in the
“AUTO” position, manually operate the switch. Have the
system checked by a certified i-MiEV dealer.
Light auto-cutout function (headlights and other
lights)
N00532600554

If the key is turned to “LOCK” or “ACC” position or
removed from the electric motor switch and the driver’s
door is opened with the combination headlights and dim-
mer switch in the “ ” or “ ” position, the lights auto-
matically turn off.
• If the driver’s door is opened after the key is removed
from the electric motor switch, a buzzer will sound to
remind you to turn off the lights.
• If the driver’s door is opened with the key in the electric
motor switch, a buzzer will sound intermittently to
remind you to remove the key.

If the key is turned to “LOCK” or “ACC” position with
the driver’s door closed and the combination headlights
and dimmer switch in the “ ” or “ ” position, the
lights will stay on for about 3 minutes and then turn off
automatically. NOTE
The light auto-cutout function can be deactivated.
See a certified i-MiEV dealer for details.
BK0140800US.book 79 ページ ２０１１年９月２９日　木曜日　午後３時２８分