2012 MERCEDES-BENZ SLK-CLASS ROADSTER fuel consumption

[x] Cancel search: fuel consumption

Page 11 of 336

MERCEDES-BENZ SLK-CLASS ROADSTER 2012  Owners Manual Switching off .................................. 150
Tow-starting (vehicle) ..................... 289
Engine electronics
Problem (malfunction)  ...................138
Engine oil
Adding  ..............

Page 137 of 336

MERCEDES-BENZ SLK-CLASS ROADSTER 2012  Owners Manual ECO start/stop function
Important safety notesGWARNING
If the ECO symbol appears in the
multifunction display when the engine is
switched off, the engine was switched off
automatically. However, all v

Page 144 of 336

MERCEDES-BENZ SLK-CLASS ROADSTER 2012  Owners Manual Kickdown
Use kickdown for maximum acceleration.
XVehicles for USA (except AMG 
vehicles):  fully depress the accelerator
pedal.
The transmission shifts to a lower gear
depending on the engine speed.XV

Page 145 of 336

MERCEDES-BENZ SLK-CLASS ROADSTER 2012  Owners Manual In the automatic drive program, you can
restrict or derestrict the shift range by using
the steering wheel paddle shifters
( Y  page 143).
In the manual drive program, you can change
gear using the st

Page 154 of 336

MERCEDES-BENZ SLK-CLASS ROADSTER 2012  Owners Manual Driving tips
General driving tips
Important safety notes
GWARNING
Always remember that you must concentrate
primarily on driving the vehicle. The driver's
concentration must always be directed
pri

Page 187 of 336

MERCEDES-BENZ SLK-CLASS ROADSTER 2012  Owners Manual Trip menu
Standard displayXPress and hold the  % button on the
steering wheel until the  Trip : menu
with trip odometer 1 and odometer 2 is
shown.  ;
Trip computer "From start" or "From
re

Page 302 of 336

MERCEDES-BENZ SLK-CLASS ROADSTER 2012  Owners Manual changes by 18 ‡ (10 †), the tire pressure
changes by approximately 10 kPa (0.1 bar/
1.5 psi). Take this into account when
checking the pressure of warm tires and only
correct the tire pressure if

Page 318 of 336

MERCEDES-BENZ SLK-CLASS ROADSTER 2012  Owners Manual ! On vehicles equipped with a tire pressure
monitor, electronic components are
located in the wheel.
Tire-mounting tools should not be used
near the valve. This could damage the
electronic components.