Page 73 of 128
71
Using the meter
■
■Rev Peak
An afterimage of the tachometer needle at the highest engine speed attained prior
to an upshift or deceleration will be retained for approximately 0.5 seconds. This
function simulates the “telltale needle” used in traditional analog racing tachometers to
help the driver time their upshifts and check over-revs on downshifting etc.
The Rev Peak function can be turned on or off from “Settings” on the menu display.
The color of the tachometer needle afterimage will change in accordance with that of
the actual tachometer needle.
Tachometer needle colorTachometer afterimage needle color
Blue Red
Red Blue
White Blue
Page 74 of 128
72
■
■Lap Timer
The stopwatch function is available by selecting “Lap
Timer” from the menu.
In addition to the stopwatch function, lap time list,
fastest lap time and total time can also be displayed.
Measurement of time to destination, section time, etc.
is also available.
Page 75 of 128
Page 76 of 128
Page 77 of 128
Page 78 of 128
Page 79 of 128
Section 02
Maintaining the vehicle’s
exterior
Maintaining the vehicle’s interior
Page 80 of 128
78
■
■Washing the vehicle
To prevent paint deterioration and corrosion on the body and components (wheels
etc.), wash the vehicle immediately if it becomes dirty. Hand washing is recommended
to preserve the paint finish.
1 Working from top to bottom, liberally apply water to the vehicle body, wheel wells
and underside of the vehicle to remove any dirt and dust.
2 Wash the vehicle body using a sponge or soft cloth, such as a chamois.
3 For hard-to-remove marks, use a neutral detergent and rinse thoroughly with
water.
4 Wipe away any water.
Maintaining the vehicle’s exterior