2012 Lexus LFA lexus LFA 2012 Owner's Manual / LEXUS 2012 LFA OWNERS MANUAL (OM77006U)

127
2-2. Instrument cluster
2
When driving
Select the desired memory and
press right on the control pad.
To turn off the “Speed Ind” function,
select “OFF” and press left on the
control pad. (The screen will return
to the menu display.)
Select the desired speed by press-
ing up and down on the control
pad.
Selectable speed range:
In mph reading 20 mph to 160
mph*
In km/h reading 30 km/h to
250 km/h*
Press: Changes in 1 mph or 1 km/h
intervals
Press and hold: Changes in 10 mph
or 10 km/h intervals
*: Always observe the legal speed limit when driving on public
roads.
STEP2
STEP3

128
2-2. Instrument cluster
Press left on the control pad to
enter the desired speed.
Press left on the control pad again
to confirm the desired memory and
speed. (The screen will return to
the menu display.)
STEP4

129
2-2. Instrument cluster
2
When driving
“Rev Ind” (rev indicator)When the engine reaches a set speed and the driving mode is set to
SPORT, NORMAL or WET mode, a buzzer will sound and the tachome-
ter will show a ring-shaped indicato r in green or amber. (Some settings
cannot be changed while the vehicle is in motion.)
If the engine speed enters the red zone, the over-rev warning will be
shown in red regardless of the set speed. ( P. 1 5 6 )
■ Indicator
■ Set up procedure
Select “Rev Ind” and press right on
the control pad.
STEP1

130
2-2. Instrument cluster
Select “ON” and press right on the
control pad.
To turn off the “Rev Ind” function,
select “OFF” or set it to “----” (as
shown) and then press left on the
control pad. (The screen will return
to the menu display.)
Select engine speeds for the green
and amber sections.Right: Switches between the
green and amber sections
Up and down: Engine speed
selection
Selectable engine speed range:
4000 rpm to 9000 rpm
The speed can be changed in 100
rpm intervals.
Either green or amber, or both
green and amber can be selected.
STEP2
STEP3

131
2-2. Instrument cluster
2
When driving
Press left on the control pad to
enter the desired engine speed.The settings are shown as fol-
lows: : Set in both green andamber
: Set in green
: Set in amber
Press left on the control pad again
to confirm the “Rev Ind” function.
(The screen will return to the menu
display.)
STEP4

132
2-2. Instrument cluster
“Status” (vehicle status)“Trip Info”, “Oil Level”, “Oil Maintenance” and “Tire Pressure” information
can be checked. Select “Status” and press right on
the control pad.
Select the desired menu item and
press right on the control pad.
“Trip Info” (P. 133)
“Oil Level” ( P. 135)
“Oil Maintenance” ( P. 1 3 8 )
“Tire Pressure” ( P. 140)
STEP1
STEP2

133
2-2. Instrument cluster
2
When driving
■“Trip Info” (trip information)
Displays current fuel consumption, average fuel consumption, average
vehicle speed and driving range.
Select “Trip Info” and press right on
the control pad.
STEP1

134
2-2. Instrument cluster
Current fuel consumption
Displays the current rate of fuel
consumption.
Average fuel consumption
Displays the average fuel con-
sumption since the function was
reset.
This function can be reset from
the normal display. (P. 118)
Average vehicle speed
Displays the average vehicle
speed since the function was
reset.
This function can be reset from
the normal display. ( P. 1 1 9 )
Driving range
Displays the estimated maxi-
mum distance that can be
driven with the remaining fuel.
This distance is computed based
on your average fuel consump-
tion. As a result, the actual dis-
tance that can be driven may
differ from that displayed.
When only a small amount of
fuel is added to the tank, the dis-
play may not be updated.
STEP2