2012 Lexus HS250h phone

SETUP
368
Editing the device name
U10012LI
1. Select “Edit” of “Device Name”.
U10192LC
2. Use the software keyboard to input
the device name.
INFORMATION
The device names are common Blue-
toothraudio and Bluetooth rphone.
If you change the device name of the
phone, the device name of the audio
will change at same time.
However, passcodes can be set sepa-
rately.
Editing the passcode
U10013LI
1. Select “Edit” of “Passcode”.
U10014LI
2. Input a passcode and select “OK”.
11 08.03HS250h_NAVI_U
75051U

SETUP
369
D
Initializing the Bluetooth
rsettings
You can initialize the settings.
U10015LI
1. Select “Default”.
U10196LC
2. Select “Yes”.
If “Handsfree Power” is changed from “Off”
into “On”, Bluetooth rconnection will be-
gin. If you connect a phone while
Bluetooth
raudio is playing
U10197LC
This screen is displayed, and the
Bluetooth raudio will stop temporarily.
11 08.03HS250h_NAVI_U
75051U
12

SETUP
370
You can do the detail settings.
1. Push the “MENU” button on the Re-
mote Touch. (See “—Remote Touch”
on page 10.)
2. Select “Setup”.
3. Select “Phone”.
U10198LC
4. Select “Details”.
U10199LC
5. Do each setting according to the fol-
lowing procedures.
6. When you complete each setting,
select “Save”.
DIncoming call display
U10271LC
You can select the method of the in-
coming call display.
U10201LC
1. Select “Incoming Call Display
Mode”.
11 08.03HS250h_NAVI_U
75051U
— Details

SETUP
371
U10202LC
2. Select “Full Screen” or “Drop
Down”.
“Full Screen”mode
When a call is received, the
....
Hands −free screen is dis-
played and you can operate it
on the screen.
“Drop Down” mode
The message is displayed on
....
the upper side of the screen.
You can only operate the
steering switch.
DThe Bluetooth rconnection status
at start up
U10203LC
When the “POWER” switch is in
ACCESSORY or ON mode and the
Bluetooth ris automatically connected,
the connection check is displayed.
When “Display Phone Status” is “On”,
this status is displayed.
When “Display Phone Status” is “Off”,
this status is not displayed.
11 08.03HS250h_NAVI_U
75051U
12

SETUP
372
U10204LC
1. Select “Display Phone Status”.
U10205LC
2. Select “On” or “Off”.
DInitializing the settings
You can initialize the settings.
U10206LC
1. Select “Default”.
U10207LC
2. Select “Yes”.
11 08.03HS250h_NAVI_U
75051U

SETUP
376
U10218LC
3. When this screen is displayed, enter
the passcode displayed on the screen
into the portable player.
For the operation of the portable player,
see the manual that comes with it.
If you want to cancel the entry, select “Can-
cel”.
U10219LC
4. When the connection is complete,
this screen is displayed.
You do not need to enter the portable play-
er in case of using the same one.
U10220LC
When this screen is displayed, follow the
guidance on the screen to try connection
again.When another Bluetooth
rdevice is
connected
If you want to disconnect it, select “Yes”.
INFORMATION
If the device corresponds with both
Bluetooth rphone and Bluetooth rau-
dio, register and connect the
Bluetooth rphone first or a connec-
tion failure may occur when register-
ing the Bluetooth raudio.
11 08.03HS250h_NAVI_U
75051U

SETUP
379
(c) Changing the passcode
The passcode for registering your por-
table player on the system. You can
change this to 4 to 8 digit number of
your choice. The default is “0000”.
U10227LC
1. Select “Edit” of “Passcode” on “BT
Audio Settings” screen.
U10228LC
2. Enter the new 4−8 digits passcode
and select “OK”.
Each time you select
, an input digit
is deleted. (d) Changing the device name
You can change a device name. Even if
you change a device name, the name
registered your portable player is not
changed.
U10229LC
1. Select “Edit” of “Device Name” on
“BT Audio Settings” screen.
U10230LC
2. Enter the new device name and se-
lect “OK”.
INFORMATION
The device names are common
Bluetooth
raudio and Bluetooth r
phone.
If you change the device name of the
audio, the device name of the phone
will change at same time.
However, passcodes can be set sepa-
rately.
11 08.03HS250h_NAVI_U
75051U
12

SETUP
383
(b) Dealer setting
It is possible to register a dealer in the sys-
tem. With dealer information registered,
route guidance to the dealer is available.
1. Push the “MENU” button on the Re-
mote Touch, then select “Setup”.
2. Select “Vehicle” on the “Setup”
screen.
3. Select “Maintenance” on the “Ve-
hicle Settings” screen.
U10272LC
4. Select “Set Dealer”.
U10238LC
5. If the dealer has not been registered,
enter the location of the dealer in the
same way as for a destination search.
(See “Destination search” on page 68.)
When “Set Dealer” registration is finished,
the “Dealer” screen will be displayed.
U10239LC
6. Select “Edit” for the item you want
to change.
“Dealer”: To enter the name of a dealer.
(See page 384.)
“Contact”: To enter the name of a dealer
member. (See page 384.)
“Location”: To set a location. (See page
384.)
“Phone #”: To set a telephone number.
(See page 385.)
“Delete Dealer”:To delete the dealer in-
formation displayed on the screen.
“Enter
”: To set the displayed dealer as
a destination. (See “Starting route guid-
ance” on page 89.)
11 08.03HS250h_NAVI_U
75051U
12