2012 Lancia Voyager ad blue

 VEHICLE INFO (CUSTOMERINFORMATION FEATURES) . . . . . . . . . . . . . . 180
 MESSAGES . . . . . . . . . . . . . . . . . . . . . . . . . . 180
 UNITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
 KEYLESS ENTER-N-GO DISPLAY (for versions/markets, where provided) . . . . . . . . 180
 COMPASS / TEMPERATURE DISPLAY . . . . . 180
 CUSTOMER-PROGRAMMABLE FEATURES (SYSTEM SETUP) . . . . . . . . . . . . . . . . . . . . . 183
 SOUND SYSTEMS . . . . . . . . . . . . . . . . . . . . . . . 187
 NAVIGATION SYSTEM (for versions/markets, where provided) . . . . . . . . . . . . . . . . . . . . . . . . . 187
 iPod®/USB/MP3 CONTROL (for versions/ markets, where equipped) . . . . . . . . . . . . . . . . . 187
 Connecting The iPod® Or External USB Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
 Using This Feature . . . . . . . . . . . . . . . . . . . . . 188
 Controlling The iPod® Or External USB Device Using Radio Buttons . . . . . . . . . . . . . . 188
 Play Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
 List Or Browse Mode . . . . . . . . . . . . . . . . . . . 189
 Bluetooth Streaming Audio (BTSA) . . . . . . . . 191
 UCONNECT™ MULTIMEDIA VIDEO ENTERTAINMENT SYSTEM (VES)™ (for
versions/markets, where provided) . . . . . . . . . . 191
 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . 191
 Play Video Games . . . . . . . . . . . . . . . . . . . . . 192
158

Bluetooth Streaming Audio
(BTSA)
Music can be streamed from your cel-
lular phone to the Uconnect™ phone
system.
Controlling BTSA Using Radio
Buttons
To get into the BTSA mode, press
either “AUX” button on the radio or
press the VR button and say
“Bluetooth Streaming Audio”.
Play Mode
When switched to BTSA mode, some
audio devices can start playing music
over the vehicle’s audio system, but
some devices require the music to be
initiated on the device first, then it
will get streamed to the Uconnect™
phone system. Seven devices can be
paired to the Uconnect™ phone sys-
tem, but just one can be selected and
played.Selecting Different Audio Device
1. Press PHONE button to begin.
2. After the "Ready" prompt and the
following beep, say "Setup", then
"Select Audio Devices".
3. Say the name of the audio device
or ask the Uconnect™ phone system
to list audio devices.
Next Track
Use the SEEK UP button, or press the
VR button on the radio and say “Next
Track” to jump to the next track mu-
sic on your cellular phone.
Previous Track
Use the SEEK DOWN button, or press
the VR button on the radio and say
“Previous Track” to jump to the pre-
vious track music on your cellular
phone.
Browse
Browsing is not available on a BTSA
device. Only the current song that is
playing will display info.UCONNECT™
MULTIMEDIA VIDEO
ENTERTAINMENT
SYSTEM (VES)™ (for
versions/markets, where
provided)
Getting Started

Screen(s) located in the over-
head console: Unfold the over-
head LCD screen(s) by pushing the
button on the overhead console be-
hind the screen(s).
 Cycle the ignition to the ON or ACC position.
191

Towing Requirements – Trailer
Lights And Wiring
Whenever you pull a trailer, regard-
less of the trailer size, stop lights and
turn signals on the trailer are required
for motoring safety.
The Trailer Tow Package may include
a seven-pin or a thirteen-pin wiring
harness. Use a factory approved
trailer harness and connector.
NOTE:
Do not cut or splice wiring into the
vehicles wiring harness.
The electrical connections are all
complete to the vehicle but you must
mate the harness to a trailer connec-
tor.
Seven - Pin Connector DetailsPin Function Wire
Color
1 Left Turn Signal Yellow
2 Rear Fog Light Blue
3 Ground/
Common Re-
turn White
4 Right Turn Sig- nal Green
5 Right Rear Posi- tion, Side
Marker Lights,
and Rear Regis-
tration Plate
Illumination
Device
1
Brown
6 Stop Lights Red
7 Left Rear Posi- tion, Side
Marker Lights,
and Rear Regis-
tration Plate
Illumination
Device
1
Black
1The rear position registration
plate illumination device shall be
connected such that no light of the
device has a common connection
with both pins 5 and 7.
Thirteen - Pin Connector Details Pin Function Wire
Color
1 Left Turn Signal Yellow
2 Rear Fog Light Blue
3 Ground/
Common Re-
turn for Con-
tacts (Pins) 1
and 2 and 4 to
8
2
White
4 Right Turn Sig- nal Green
5 Right Rear Posi- tion, Side
Marker Lights,
and Rear Regis-
tration Plate
Illumination
Device.
b
Brown
Seven - Pin Connector
Thirteen - Pin Connector
264

Thirteen - Pin Connector DetailsPin Function Wire
Color
6 Stop Lights Red
7 Left Rear Posi-
tion, Side
Marker Lights,
and Rear Regis-
tration Plate
Illumination
Device
1
Black
8 Reverse Lights Red/ Black
9 Permanent
Power Supply
(+12V) Brown/
White
10 Power Supply Controlled by
Ignition Switch
(+12V) Red
11
a
Return for Con-
tact (Pin) 10
2
White
12 Reserve for Fu- ture Allocation
3
Red/
Blue
13 Return for Con-
tact (Pin) 9
2
White
Thirteen - Pin Connector DetailsPin Function Wire
Color1The rear position registration
plate illumination device shall be
connected such that no light of the
device has a common connection
with both pins 5 and 7.2The three return circuits shall not
be connected electrically in the
trailer.3The allocation pin 12 has been
changed from “Coding for coupled
Trailer” to “Reserve for Future Al-
location.”
TOWING TIPS
Before setting out on a trip, practice
turning, stopping and backing the
trailer in an area away from heavy
traffic.
Automatic Transmission
The DRIVE gear can be selected when
towing. However, if frequent shifting
occurs while in DRIVE, select a lower
gear range using the Electronic Range
Select (ERS) shift control. NOTE:
Using a lower gear range while op-
erating the vehicle under heavy
operating conditions will improve
performance and extend transmis-
sion life by reducing excessive
shifting and heat build up. This
action will also provide better en-
gine braking.
The automatic transmission fluid and
filter should be changed if you REGU-
LARLY tow a trailer for more than
45 minutes of continuous operation.
Refer to the “Maintenance Schedule”
for the proper maintenance intervals.
Electronic Speed Control (for
versions/markets, where
provided)
 Do not use in hilly terrain or with
heavy loads.
 When using the speed control, if you experience speed drops greater
than 16 km/h, disengage until you
can get back to cruising speed.
 Use speed control in flat terrain and with light loads to maximize fuel
efficiency.
265

FUSES/TIPM
Cavity Cartridge Fuse Mini-Fuse Description
J1 40 Amp Green — Power Folding Seat
J2 30 Amp Pink — Power Liftgate Module
J3 30 Amp Pink — Rear Door Module (RR Door Node)
J4 25 Amp Natural — Driver Door Node
J5 25 Amp Natural — Passenger Door Node
J6 40 Amp Green — Antilock Brakes Pump/Stability Control System
J7 30 Amp Pink — Antilock Brakes Valve/Stability Control System
J8 40 Amp Green — Power Memory Seat (for versions/markets, where provided)
J9 40 Amp Green — Partial Zero Emissions Vehicle Motor/Flex Fuel
J10 30 Amp Pink — Headlamp Wash Relay/Manifold Tuning Valve
J11 30 Amp Pink — Power Sliding Door Module/Anti–Theft Module Relay Lock
Feed
J12 30 Amp Pink Rear Blower Motor/ RAD Fan
J13 60 Amp Yellow — Ignition Off Draw (IOD) – Main
J14 40 Amp Green — Rear Window Defogger
J15 40 Amp Green — Front Blower
J17 40 Amp Green — Starter Solenoid
J18 20 Amp Blue — Powertrain Control Module Trans Range
J19 60 Amp Yellow — Radiator Fan
J20 30 Amp Pink — Front Wiper LO/HI
J21 20 Amp Blue — Front/Rear Washer
J22 25 Amp Natural — Sunroof Module
M1 — 15 Amp Blue Rear Center Brake Lamp/Brake Switch
M2 — 20 Amp Yellow Trailer Lighting/Fog Lamps
M3 — 20 Amp Yellow Front/Rear Axle Locker/Vacuum Pump Motor
M4 — 10 Amp Red Trailer Tow
M5 — 25 Amp Natural Inverter
M6 — 20 Amp Yellow Power Outlet #1 (ACC), Rain Sensor
M7 — 20 Amp Yellow Power Outlet #2 (BATT/ACC SELECT)
M8 — 20 Amp Yellow Front Heated Seat (for versions/markets, where provided)
305

FUSES/TIPM
Cavity Cartridge Fuse Mini-Fuse Description
M9 — 20 Amp Yellow Rear Heated Seat (for versions/markets, where provided)
M10 — 15 Amp Blue Ignition Off Draw — Video System, Satellite Radio, DVD,
Hands-Free Module, Universal Garage Door Opener, Vanity
Lamp, Streaming Video Module
M11 — 10 Amp Red Ignition Off Draw – Climate Control System
M12 — 30 Amp Green Amplifier (AMP)/Radio
M13 — 20 Amp Yellow Ignition Off Draw— Instrument Cluster, SIREN, Clock Mod-
ule, Multi-Function Control Switch/ITM
M14 — 20 Amp Yellow Spare Fuse
M15 — 20 Amp Yellow Rear View Mirror, Instrument Cluster, Multi-Function Con-
trol Switch, Tire Pressure Monitor, Glow Plug Module – Ex-
port Diesel Only, Assy-Shifter (Hall Effect), Acoustic Noise
Cancellation
M16 — 10 Amp Red Airbag Module/Occupant Classification Module
M17 — 15 Amp Blue Left Tail/License/Park Lamp, Running Lamps
M18 — 15 Amp Blue Right Tail/Park/Run Lamp
M19 — 25 Amp Natural Automatic Shutdown #1 and #2
M20 — 15 Amp Blue Instrument Cluster Interior Light, Switch Bank, Steering
Column Module, Switch Steering Wheel
M21 — 20 Amp Yellow Automatic Shutdown #3
M22 — 10 Amp Red Right Horn (HI/LOW)
M23 — 10 Amp Red Left Horn (HI/LOW)
M24 — 25 Amp Natural Rear Wiper
M25 — 20 Amp Yellow Fuel Pump, Diesel Lift Pump – Export Only
M26 — 10 Amp Red Power Mirror Switch, Driver Window Switch
M27 — 10 Amp Red Ignition Switch, Wireless Control Module, Keyless Entry
Module, Steering Column Lock
M28 — 10 Amp Red Powertrain Control Module, Transmission Feed, Transmis-
sion Control Module
306

FUSES/TIPM
Cavity Cartridge Fuse Mini-Fuse Description
M29 — 10 Amp Red Occupant Classification Module
M30 — 15 Amp Blue Rear Wiper Module, Power Folding Mirror, J1962 Diagnostic
Feed
M31 — 20 Amp Yellow Back-Up Lamps
M32 — 10 Amp Red Airbag Module, TT EUROPE
M33 — 10 Amp Red Powertrain Control Module, Transmission Control Module
M34 — 10 Amp Red Park Assist, Heater Climate Control System Module, Head-
lamp Wash, Compass , IR Sensor, Rear Camera, Lamp Door
FT Drv/Pass, Lamp Flashlight, AHLM, Relay Diesel Cabin
Heater, Rad Fan Diesel
M35 — 10 Amp Red Heated Mirrors
M36 — 20 Amp Yellow Power Outlet #3
M37 — 10 Amp Red Antilock Brakes, Stability Control System, Stop Lamp
Switch, Fuel Pump Rly Hi Control
M38 — 25 Amp Natural Door Lock/Unlock Motors, Liftgate Lock/Unlock Motors
The heated mirrors, lower instrument
panel power outlet and removable
floor console, when in the front posi-
tion are fused with self-resetting fuses
that are only serviceable by an autho-
rized dealer. The power seats are
fused by a 30 Amp circuit breaker
located under the driver's seat. The
power windows are fused by a
25 Amp circuit breaker located under
the instrument panel near the steering
column. If you experience temporary or permanent loss of these systems,
see your authorized dealer for service.
VEHICLE STORAGE
If you are leaving your vehicle dor-
mant for more than 21 days, you may
want to take steps to protect your
battery. You may do the following:
 Remove the 20 Amp mini-fuse in
the Totally Integrated Power Mod-
ule (TIPM) labeled Ignition-Off
Draw (IOD).  Or, disconnect the negative cable
from the battery.
 Anytime you store your vehicle, or keep it out of service for two weeks
or more, run the air conditioning
system at idle for about five min-
utes in the fresh air and high blower
setting. This will ensure adequate
system lubrication to minimize the
possibility of compressor damage
when the system is started again.
307

WARNING!A transient high voltage occurs at the
bulb sockets of High Intensity Dis-
charge (HID) headlamps when the
headlamp switch is turned ON. It may
cause serious electrical shock or elec-
trocution if not serviced properly. See
your authorized dealer for service.NOTE:On vehicles equipped with High In-
tensity Discharge (HID) headlamps,
when the headlamps are turned on,
there is a blue hue to the lamps. This
diminishes and becomes more
white after approximately 10 sec-
onds, as the system charges.QUAD HEADLAMPS (for
versions/markets, where
provided)CAUTION!
Where possible, it is advisable to
have bulbs changed at a LANCIA
Dealership. Proper operation and
orientation of the external lights are
essential for driving safety and com-
plying with the law.1. Raise the hood to access the high or
low beam bulbs at the rear of the
headlamp housing.
2. Release the two tabs on the side of
the connector and remove the connec-
tor from the bulb.
3. Twist the headlamp bulb and pull
the bulb from the headlamp housing.
4. Install the new headlamp bulb and
twist until locked into the headlamp
housing.
CAUTION!
Do not touch the new bulb with your
fingers. Oil contamination will se-
verely shorten bulb life. If the bulb
comes in contact with an oily sur-
face, clean the bulb with rubbing
alcohol.
5. Reconnect the wiring connector to
the bulb.
FRONT TURN SIGNAL AND
SIDE MARKER LAMPS
Access to change the turn signal or
side marker bulb is from the rear of
the headlamp housing. 1. Twist the turn signal or side
marker socket to remove the socket.
2. Pull bulb from the socket.
3. Replace the bulb and reinstall
socket.
SIDE REPEATER LAMPS
The side repeater lamps are located in
both front fenders.
1. Push the side repeater lamp to the
right and release retaining tab on the
left.
2. Pull side repeater lamp out and
disengage bulb socket from lamp.
3. Press, then rotate and pull bulb
from socket.
4. Install bulb to socket.
5. Push the lamp socket into the side
repeater lamp.
Side Repeater Bulb Replacement
309