2012 HONDA PILOT audio

µµ µ
µ´µ
To switch between the
category mode and channel mode,
push the interf ace selector down to
display AUDIO MENU, then turn
the interf ace dial to select Mode, and
press ENTER on the interf ace
selector.
Turn the interf ace dial to select CH
or CAT, then press ENTER on the
interface selector. Move the
interfaceselectoruptogoback.
You can also switch the mode by
pressing the TITLE button for 3seconds.
In the category mode, such as Jazz,
Rock, Classical, etc., you can
navigate through all of the channels
within that category. In the channel
mode, you can select all of the
available channels. Each time you press and release the
TITLE button, the center display
changes in the f ollowing sequence:
CATEGORY, NAME (artist name),
TITLE (music title), and CHANNEL
NAME (channel name).
You may experience periods when
XM Radio does not transmit the
artist

µ
µ
µ
µ Press the button. Either
XM1 or XM2 will be shown on the
display.
To store a channel: Youcanstoreupto12
preset channels using the six preset
buttons. Each button stores one
channel f rom the XM1 band and one
channel f rom the XM2 band.
This
f unction samples the stations in the
selected category. Push down the
interf ace selector to select AUDIO
MENU,thenturntheinterfacedial
to select Category Scan and press
ENTER on the interf ace selector.
The scan f unction gives
you a sampling of all channels while
in the channel mode. In the category
mode, only the channels within that
category are scanned. To activate
scan, press the SCAN button. The
system plays each channel in
numerical order f or a f ew seconds,
then selects the next channel. When
you hear a channel you want to
continue listening to, press the
button again.
This f unction
samples all channels. Push down the
interf ace selector to select AUDIO
MENU,thenturntheinterfacedial
to select Channel Scan and press
ENTER on the interf ace selector.
1.
CONT INUED
Preset
CAT EGORY SCAN
SCAN
CHA NNEL SCA N
Playing t he XMRadio (Models with navigation system)
Features
315
XM BAND
Main MenuTable of Contents

µµ
µ
µ
µ
µ µ
Once a channel is stored, press
and release the proper preset
button to tune to it.
Press the button or scroll
up again. The other XM band will
be shown. Store the next six
channels using steps 2 and 3.
Repeat steps 2 and 3 to store the
f irst six channels.
Pick the preset button you want
f or that channel. Press and hold
the preset button until you hear a
beep. You can also pick the
number with the interf ace dial.
Select your desired number and
press and hold ENTER on the
interf ace selector.
In category mode, only channels
within that category can be
selected. In channel mode, all
channels can be selected.
Use the tune, list, or scan f unction
to tune to a desired channel.
The selected
channel has no artist or title
inf ormation at this time.
There is
a problem with the XM antenna.
Please consult your dealer.
The signal is
currently too weak. Move the vehicle
to an area away from tall buildings,
and with an unobstructed view of the
southern horizon. XM is loading the
audio or program inf ormation. The channel
currently selected is no longer
broadcasting.
The
encryption code is being updated.
Wait until the encryption code is
f ully updated. Channels 0 and 1
should still work normally. The selected
channel number does not exist, is
not part of your subscription, or this
channel has no artist or title
inf ormation at this time.
5.
3. 4.
2.
XM Radio Display Messages‘‘NO INFO

Af ter you have registered with XM
Radio, keep your audio system in the
XM Radio mode while you wait f or
activation. This should take about 30
minutes.
If your XM Radio service has expired
or you purchased your vehicle f rom
a previous owner, you can listen to a
sampling of the broadcasts
available
on XM Radio. With the ignition
switch in the ACCESSORY (I) or the
ON (II) position, push the power/
volume knob to turn on the audio
system, and press the button.
A variety of music types and styles
will play. While waiting f or activation, make
sure your vehicle remains in an open
area with good reception. XM Radio
will continue to send an activation
signal to your vehicle f or at least 12
hours from the activation request. If
the service has not been activated
af ter 36 hours, contact XM
Radio.
In Canada, contact XM CANADA
.
Theremaybeothergeographic
situations that could af f ect XM Radio
reception.
If you decide to purchase XM Radio
service, contact XM Radio at
,orat
1-800-852-9696. In Canada, contact
XM Canada at , or at
1-877-209-0079. You will need to give
them your radio I.D. number and
your credit card number. To get your
radio I.D. number, turn the TUNE
knob until ‘‘0

CONT INUED
Playing a Disc (Models with navigation syst em)
Features
Wit hout rear ent ert ainment syst em Wit h rear ent ert ainment syst em
319
POWER/
VOLUMEKNOB
AUDIO
BUTTON CD
BUTTON
TITLE
BUTTON EJECT
BUTTON
CATEGORY
BAR
SCAN
BUTTON
SKIP BAR AUDIO SCREEN
DISC SLOT
INTERFACE DIAL
POWER/
VOLUME KNOB
AUDIO
BUTTON TITLE
BUTTON
EJECT
BUTTON
SKIP BAR
INTERFACE DIAL
DISCSLOT
SCAN
BUTTON
CATEGORY
BAR CD BUTTON
Main MenuTable of Contents

The disc packages or jackets should
have one of these marks.
To load or play a disc, the ignition
switch must be in the ACCESSORY
(I) or ON (II) position.
The disc player can play these disc
f ormats:
If a f ile on WMA or AAC disc is
protected by digital rights
management (DRM), the audio
system skips to the next f ile.
Video CDs and DVD discs will not
work in this unit.
Some CD-DA and CD-ROM mixed
discs are not playable.
CD (CD-DA, CD-TEXT)
CD-R/RW
MP3/WMA The disc player can also play CD-Rs
andCD-RWscompressedinMP3,
WMA or AAC formats.
Playing a Disc (Models with navigation syst em)
320
NOTE:
Main MenuTable of Contents

To replay the current track
continuously, push the interf ace
selector down while playing a disc.
Turn the interf ace dial to select
Repeat on the AUDIO MENU, and
press ENTER on the interf ace
selector. Turn the interf ace dial to
select Repeat icon, and press
ENTER on the interf ace selector.
You can also choose a track directly
from a track list. If there are no track
names, you will see ‘‘No Title

Turn the interface dial to select the
track random icon, and press
ENTER on the interf ace selector.
This f eature plays the tracks within a
disc in random order. When playing
MP3, WMA or AAC f ormat discs, all
the tracks within the disc are played
in random order, regardless of the
conf iguration of the f older.
Push the interf ace selector down
while playing a disc. Turn the
interf ace dial to select Random on
the AUDIO MENU, and press
ENTER on the interf ace selector.
To turn this feature off, turn the
interf ace dial to select the OFF icon,
andpressENTERontheinterface
selector.
To turn this feature off, turn the
interf ace dial to select the OFF icon,
andpressENTERontheinterface
selector.
Random Play
Playing a Disc (Models with navigation syst em)
324
TRACK RANDOM INDICATOR
TRACK RANDOM ICON
Main MenuTable of Contents