2012 HONDA ACCORD COUPE Owners Manual

µµ
If you just
received your vehicle and have not
trained any of the buttons in
HomeLink bef ore, you should erase
any previously learned codes bef ore
training the f irst button. To do this,
press and hold the two outside
buttons on the HomeLink
transceiver for about 10 20 seconds,
until the red indicator f lashes.
Release the buttons, then proceed to
step 1.
Refer to the safety information that
came with your garage door opener
to test that the safety features are
f unctioning properly. If you do not
have this information, contact the
manuf acturer of the equipment.
Bef ore programming HomeLink to a
garage door or gate opener, make
sure that people and objects are out
of thewayof thedevicetoprevent
potential injury or damage.
When programming a garage door
opener, park just outside the garage.
HomeL inkUniversal Transceiver
T raining HomeL ink
Important Saf ety Precautions
Bef ore you begin
254

Features
2012 Accord Coupe

If you are training the second or third buttons, go directly to step 1.
CONT INUED
HomeL inkUniversal Transceiver
255

Features
2012 Accord Coupe

HomeLinkis a registered
trademark of Johnson Controls, Inc.As required by the FCC:
This device complies with Part 15 of theFCC rules. Operation is subject to thef ollowing two conditions: (1) This devicemay not cause harmf ul interf erence, and(2) this device must accept anyinterf erence received, includinginterf erence that may cause undesiredoperation.
Changes or modif ications not expresslyapproved by the party responsible f orcompliance could void the user’sauthority to operate the equipment.
This device complies with IndustryCanada Standard RSS-210.Operation is subject to the f ollowing twoconditions: (1) this device may not causeinterf erence, and (2) this device mustaccept any interf erence that may causeundesired operation of the device.
HomeL inkUniversal Transceiver
256

Features
2012 Accord Coupe

µµ
Bluetooth
If equipped
handsf reelink.honda.
com
www.handsfreelink.ca,HandsFreeLink(HFL)
allows you to place and receive
phone calls using voice commands,
without handling your cell phone.
To use HFL, you need a Bluetooth-
compatible cell phone. For a list of
compatible phones, pairing
procedures, and special f eature
capabilities:
In the U.S., visit or call (888) 528-7876.
Press and
release to give a command or answer
a call.
Press and
release to end a call, go back to the
previous command, or cancel the
command.
In Canada, visit
or call (888) 528-7876.
CONT INUED
Using HFL
HFL Talk button
HFL Back button
HFL Buttons
BluetoothHandsFreeL ink
257
HFL BACK BUTTON HFL TALK BUTTON
HFL TALK BUTTON
HFL BACK BUTTON
On models with navigation system On models without navigation system
NAVI VOICE
CONTROL
BUTTONS

Features
2012 Accord Coupe

ÌÌÌÌ
Try to reduce all background
noise. If the microphone picks up
voices other than yours,
commands may be misinterpreted. Many commands can be spoken
together. For example, you can
say ‘‘Call 123-456- ’’ or
‘‘Dial Peter.’’
Press and release the HFL Talk
button each time you want to
make a command. Af ter the beep,
speak in a clear, natural tone.
When HFL is in use, navigation
voice commands cannot be
recognized.
To change the volume level of
HFL, use the audio system volume
knob or the steering wheel volume
controls.
Airorwindnoisefromthe
dashboard and side vents,
windows and moonroof may
interf ere with the microphone.
Adjust or close them as necessary.
Voice Cont rol T ips
BluetoothHandsFreeL ink
258
MICROPHONE

Features
2012 Accord Coupe

To hear general HFL inf ormation,
including help on pairing a phone
or setting up the system, say
‘‘Tutorial.’’
For help at any time, including a
list of available commands, say
‘‘Hands f ree help.’’A notif ication that there is an
incoming call, or HFL is in use, will
appear on the navigation screen
when the audio system is on.
When there is an incoming call, or
HFL is in use, ‘‘HANDSFREELINK’’
will appear on the display.
‘‘ ’’ indicator will be displayed on
the audio display when a phone is
linked.
On models with navigation system
Help Feat ures
Inf ormation Display
BluetoothHandsFreeL ink
259
U.S. model with navigation system is
shown.
BLUETOOTH INDICATOR
BLUETOOTH INDICATOR
On models without navigation system PHONE NUMBER

Features
2012 Accord Coupe

ÌÌÌÌ
How to Use HFL
BluetoothHandsFreeL ink
260
‘‘Phone Setup’’
‘‘Call’’ or ‘‘Dial’’‘‘Edit’’
‘‘Delete’’
The ignition switch must be in the ACCESSORY (I) or ON (II) position.
Press HFL
Talk button
Press and release the HFL Talk button each time you give a command. Hear which paired phone is currently linked to the system
Once a phonebook entry is stored, you can say a name here. (See page
265)
(See page 266)
‘‘Status’’
‘‘List’’
‘‘Next Phone’’ ‘‘Pair’’
‘‘Jim Smith’’ ‘‘Set Pairing Code’’ Set the pairing code to a ‘‘Fixed’’ or ‘‘Random’’ number
(See page
265) (See page
263)
Pair a phone to the system
(See page264)
Edit the name of a paired phone
(See page264)
Delete a paired phone from the system
(See page264)
Hear a list of all phones paired to the system
(See page265)
Search for another previously paired phone to link to
(See page266)
Enter desired phone number
‘‘123-456- ’’

Features
2012 Accord Coupe

CONT INUED
BluetoothHandsFreeL ink
261
‘‘Redial’’
‘‘Transfer’’
‘‘Mute’’
‘‘Send’’‘‘Phonebook’’ ‘‘Store’’
‘‘Edit’’
‘‘Delete’’
‘‘Receive Contact’’
‘‘List’’
Press HFL
Talk button
Press and release the HFL Talk button each time you give a command. (See page
267)
Redial the last number called
(See page270)
Transfer a call from HFL to your phone, or from your phone to HFL
(See page271)
Mute your voice to the person at the other end of the call
(See page271)
Send numbers or names during a call
(See page272)
Store a phonebook entry
(See page272)
Edit the number of an existing phonebook entry
(See page273)
Delete a phonebook entry
(See page273)
If your phone supports this function, use this to transfer contacts from
your phone to HFL
(See page273)
Hear a list of all stored phonebook entries

Features
2012 Accord Coupe