2012 HONDA ACCORD COUPE Owners Manual

To remove f og f rom the inside of the
windows, set as follows:Select . The system
automatically switches to f resh air
mode and turns on the A/C.
Adjust the temperature with the
driver’s side temperature control
so the airf low f eels warm.
Select to help clear the
rear window.
To increase airf low to the
windshield, close the corner vents.
For f aster def ogging, manually set
the fan speed to high.
For your saf ety, make sure you have
a clear view through all the windows
bef ore driving.
When the indicator in the button is on, the SYNC
indicator also comes on. The f ront
passenger’s temperature cannot be
set separately f rom the driver’s.
Use the mode control button to
select the vents the air flows from.
Some air will flow from the
dashboard vents in all modes.
Airf low is divided between
the f loor and corner vents and the
defroster vents at the base of the
windshield.
Air f lows f rom the f loor
vents.
Airf low is divided between
the vents in the dashboard and the
f loor vents.
Air flows from the center
and corner vents in the dashboard. This button directs the main airflow
to the windshield for faster
def rosting. It also overrides any
mode selection you may have made.
When you select , the system
automatically switches to f resh air
mode and turns on the A/C. For
f aster def rosting, manually set the
fanspeedtohigh.Youcanalso
increase airf low to the windshield by
closing the corner vents on the
dashboard. To close the vents, rotate
the wheel under each corner vent.
When you turn of f by
pressing the button again, the
system returns to its former settings.
1.
2.
3.
4.Mode Cont rol
Windshield Def rost er But t on
Climate Control System
134

Features
2012 Accord Coupe

Your vehicle has two temperature
control switches, one f or the driver,
and one f or the f ront passenger.
The temperatures of the driver’s side
and the front passenger’s side are
controlled independently.
CONT INUED
Dual Temperature Control
Climate Control System
Without navigation systemWith navigation system
135
DRIVER’S SIDE TEMPERATURE
CONTROL SWITCH PASSENGER’S SIDE TEMPERATURE
CONTROL SWITCH
SYNC BUTTON
DRIVER’S SIDE TEMPERATURE
CONTROL SWITCH
PASSENGER’S SIDE TEMPERATURE
CONTROL SWITCH
SYNC BUTTON

Features
2012 Accord Coupe

The selected temperatures appear in
the display (in the center display on
models with navigation system).
When the indicator in the SYNC
button is on, you can adjust both
sides to the same temperature by
pushing the driver’s side
temperature control switch up or
down.
When you set the temperature to its
upper or lower limit, it is displayed asor .
Synchronized Cont rol
Climate Control System
136
DRIVER’S SIDE PASSENGER’S SIDE

Features
2012 Accord Coupe

Theclimatecontrolsystemhastwo
sensors: a sunlight sensor on top of
the dashboard, and a temperature
sensor next to the steering column.
Do not cover the sensors or spill any
liquidonthem. Sunlight Sensor/T emperature
Sensor
Climate Control System
137
SUNLIGHT SENSORTEMPERATURE SENSOR

Features
2012 Accord Coupe

Î
ÎAn audio system is standard on all
models. Read the appropriate pages
(as shown below) to use your
vehicle’s audio system.
For vehicles without navigation
system, see pages through .
For vehicles with navigation system,
see pages through .139 180
181 231
Audio System
138
EX-L and all V6 models without
navigation system
With navigation system
: EX model has premium audio system. U.S. models are shown.
LX and EX models

Features
2012 Accord Coupe

Most audio system f unctions can be
controlled by standard buttons, bars,
and knobs. In addition, you can
access some f unctions by using the
selector knob on the audio system.The knob turns lef t and right. Use it
to scroll through lists, or to make
selections or adjustments to a list or
menu item on the display. When you
make a selection, push the center of
the selector (ENTER) to go to that
selection.
When the audio system is in XM
Radio mode or playing discs, pushing
the selector (ENTER) knob switches
the display between the normal
display and the extended display.
The extended display has three
segments to display the detailed
inf ormation.
To select any setting such as the
clock, sound adjusting, or the
compass (if equipped), press the
MENU button. To use any audio
system f unction, the ignition switch
must be in the ACCESSORY (I) or
ON (II) position. You can select the
item by turning the selector knob.
To go back to the previous display,
press the RETURN button.
Pressing the MENU button again
will also cancel the menu display
mode.
Selector K nob
Menu Display
Audio System(Models without navigation system)
139
SELECTOR
KNOBMENU
BUTTON
RETURN
BUTTON

Features
2012 Accord Coupe

Playing the FM/A M Radio(Models without navigation system)
Without XMRadio With XMRadio
140
MENU BUTTONPRESET
BUTTONS
TITLE
BUTTON
TITLE
BUTTON
FM
BUTTON
SCAN
BUTTON AM
BUTTON AM
BUTTON
FM
BUTTON
U.S. models are shown. RETURN BUTTON
FOLDER BAR
MENU BUTTON SELECTOR KNOB
SELECTOR KNOB RETURN BUTTON
CATEGORY BAR
A.SEL (AUTO SELECT)
BUTTON SKIP BAR
SKIP BAR
A.SEL (AUTO SELECT)
BUTTON
POWER/VOLUME KNOB
POWER/VOLUME KNOB
SCAN
BUTTON
PRESET
BUTTONS

Features
2012 Accord Coupe

µµ µ
The band and f requency that the
radio was last tuned to are displayed.
To change bands, press the AM or
FM button. On the FM band, ST will
be displayed if the station is
broadcasting in stereo. Stereo
reproduction in AM is not available.
On the AM band, AM noise
reduction turns on automatically. The ignition switch must be in the
ACCESSORY (I) or ON (II) position.
Turn the system on by pushing the
power/volume knob or the AM or
FM button. Adjust the volume by
turning the power/volume knob. You can use any of f ive methods to
f ind radio stations on the selected
band: tune, skip, scan, the preset
buttons, and auto select.
The skip f unction searches
up and down f rom the current
f requency to f ind a station with a
strong signal. To activate it, press
and hold the or side of the
SKIP bar until you hear a beep, then
release it. On the FM band, you can also use
the f eatures provided by the radio
data system (RDS). For more
inf ormation on the RDS, see page .
Use the selector knob to
tune the radio to a desired f requency.
Turn the knob right to tune to a
higher f requency, or lef t to tune to a
lower f requency. The scan f unction samples
all stations with strong signals on the
selected band. To activate it, press
the SCAN button, then release it.
You will see SCAN in the display.
When the system finds a strong
signal, it will stop and play that
station f or about 10 seconds.
If you do nothing, the system will
scan f or the next strong station and
play it f or 10 seconds. When it plays
a station that you want to listen to,
press the SCAN button again.
143
CONT INUED
To Select a Station
To Play the Radio
SK IP TUNESCAN
Playing the FM/A M Radio
(Models without navigation system)
141

Features
2012 Accord Coupe