2012 Citroen DS4 pad

15
Familiarisation
Instruments and controls
1.
Steering lock and ignition. 2.Steering mounted control paddles for the
6 -speed electronic gearbox system.
3.Wiper/screenwash/trip computercontrol stalk. 4. Speaker (tweeter).
5. Windscreen demisting vent.
6.Sunshine sensor. 7. Passenger's airbag.8.Glove box/Audio/video sockets/Passenger's airbag deactivation switch.9.
Heated seat control. 10.Lumbar massage control. 11.
Electric parking brake. 12.
Gear lever, 6 -speed electronic gearbox system.13.Large multifunctional storage unit.

29Familiarisation
Driving safely

This 6 -speed gearbox offers a choice between
the comfor t of fully automatic operation or thepleasure of manual gear changing.

6-speed electronic gearbox system
1.
Gear lever. 2.Steering mounted "-"control paddle.3.Steering mounted "+"control paddle.
Display in the instrument panel
The gear engaged or the driving mode selected appears in the instrument panel screen.
N:
Neutral.
R: Reverse.
1 to 6:Gears engaged.AUTO:Automated mode.

Moving off
)
Select position N
and press the brake pedal firmly while star ting the engine. )
Engage first gear by pulling the gear lever 1towards position A
or M,
or
Engage reverse by pushing the gear lever 1towards position R.) Release the parking brake. )
Ta k e y o u r foot off the brake pedal thenaccelerate.
205

Remote control key System which permits central unlocking or locking of the vehicle using the door lock or from a distance. It is also used to locate and star t the vehicle, as well as providing protection against theft.
Unlocking the vehicle
Unfolding the key
)Press this button to unfold the key.


Complete unlocking using the
remote control


Selective unlocking using theremote control
)Press the open padlock to unlockthe vehicle completely.
)Press the open padlock once to
unlock the driver's door only.
) Press the open padlock again to unlock the other doors and the boot.


Opening the windows using the
remote contro
l
) Maintain the press on the open
padlock until the desired position
is obtained. The windows stop as soon as you release the button.



Programming the unlocking
The complete or selective door
un
locking parameter is set via the
vehicle configuration menu.

101Access
Unlocking using the key
)Turn the key for wards in the driver's door lock to unlock the vehicle completely.

Selective unlocking of the boot
)
Press the central button on theremote control to unlock the boot. The doors remain locked.
If selective unlockin
g of the boot is deactivated, pressing this button also unlocks the doors.
Programming the unlocking
The complete or selective boot
unlocking parameter is set via the
vehicle configuration menu.
Selective unlocking of the boot is
activated by default.
Each unlockin
g is confirmed by rapid flashingof the direction indicators for approximatelytwo seconds.
According to the version of your vehicle, the door mirrors unfold at the same time.
In low light, unlocking also brings on the
welcome li
ghting, both interior and exterior (see "Visibility").
Don't forget to lock the boot again by pressing the closed padlock button.

Locking the vehicle
Normal locking using the remote
control
Normal locking using the key
)Turn the key towards the rear in the driver's door lock to lock the vehicle.
) Press the closed padlock to lockthe vehicle.If one of the doors or the boot is still open, the central locking does nottake place; the vehicle locks itself then unlocks straight away, identifiable by the sound of the locks rebounding. When the vehicle is locked, if it isunlocked inadvertently, it will lock itself again automatically after thir ty secondsunless a door or the boot is opened.
The folding and unfolding of the door mirrors using the remote control can be deactivated by a CITROËN dealer or aqualified workshop. Lockin
g is confirmed by fixed lighting of the
direction indicators for approximately two seconds.
According to version, the door mirrors fold at
the same time.
In low light, locking also brings on of
the guide-me-home lighting (see "Visibility").


Closing the windows using the
remote contro
l
) Press and hold down the closed padlock until the desired position
is obtained. The windows stop
when you release the button.

When closing the windows using the remote control you must ensure thatnothing prevents them from closingcorrectly.
If you want to leave the windowspartly open, you must deactivate thevolumetric alarm monitoring.

103Access
) Press the closed padlock on the remotecontrol. This will switch on the cour tesy lamps and the direction indicators will flash for a few seconds.
Locating your vehicle

This function allows you to identify
your vehicle from a distance,
particularly in poor light. Your vehicle
must be locked.
Anti-theft protection
Electronic engine immobiliser
The key contains an electronic chip which has
a special code. When the ignition is switched on, this code must be recognised in order for star ting to be possible.
This electronic engine immobiliser locks theengine management system a few minutes
after the ignition is switched off and preventsstarting of the engine by anyone who does not
have the key.
In the event o
f a fault, you are informed by illumination of this
warning lamp, an audible signal
and a message in the screen.
In this case, your vehicle will not start; contact
a CITROËN dealer as soon as possible.
Folding the key
)First press this button to fold the key.

If you do not press the button when folding the key, there is a risk of damage to the mechanism.

Keep safely the label attached to the keys given to you on acquisition of thevehicle.

105
Access
In the event of a malfunction with the remote control, you can no longer unlock, lock or
locate your vehicle.)First of all, use the key in the lock to unlock
or lock your vehicle. )Then, reinitialise the remote control.
Fault with the remote
control

Reinitialisation
)Switch off the ignition and remove the
ignition key.)Press the closed padlock immediately for a
few seconds. )Turn the key to position 2 (Ignition on).)Switch off the ignition and remove the keyfrom the ignition switch.
The remote control is fully operational again.
Changing the battery
Battery ref.: CR2032/3 volts.
)
Unclip the cover using a small screwdriver at the two cutouts. )
Lift off the cover.)
Remove the flat battery from its location. )
Fit the new battery into its location
observing the original direction of fitment. ) Clip the cover onto the casing.
If the batter
y is flat, you are
informed by illumination of this
warning lamp, an audible signal
and a message in the screen.

If the problem persists, contact a CITROËN dealer as soon as possible.

129Visibility
Welcome lighting
The remote switching on of the passenger compar tment lighting makes your access to the vehicle easier in poor light. It is activated depending on the light level detected by the sunshine sensor.


Switching on
Switchin
g off
On the outside, the welcome lighting switchesoff automatically after a set time, when the ignition is switched on or on locking the vehicle.
On the inside, the welcome lighting switches off
automatically after a pre-determined time or onopening one of the doors.
)
Press the open padlock on the
remote control; your vehicle isunlocked.

On the outside, the sidelamps and dippedbeam headlamps, as well as the side spotlamps, located under the door mirrors, come on.
On the inside, the footwell and courtesy lampscome on.
Activation or deactivation, as well as
the duration of the lighting duration for the exterior welcome lighting can
be set via the vehicle configuration menu.


Programming