2012 Citroen DS4 height adjustment

Instruments and controls
1.
Cruise control/speed limiter controls. 2.
Controls for optional functions.3.
Steering wheel adjustment control.4.
Lighting and direction indicator control stalk.5.
Instrument panel.
6.Driver's airbag.
Horn. 7. Controls for audio and telematic system. 8.Controls for Bluetooth system or telephone. 9.
Bonnet release. 10.Door mirror controls.
Electric window controls.11. Fusebox.12.Manual headlamp height adjustment
Lower side switch panel.
13.Fuel filler flap opening switch.Upper side switch panel. 14 .Side adjustable air vent. 15. Front side window demisting vent.

17Familiarisation
Sitting comfortably
Manual adjustment88

Driver's seat


Forwards-backwards Height
Electric adjustment


Seat back angle
89

Sitting comfortably
Head restraint height and angle
Front seats
Other functions available...
Lumbar massage.Storing driving positions (driver's electric seat). Heated seats.
90
1.
Release the steering wheel. 2.Adjust for height and reach.3.Lock the steering wheel.


Steering wheel adjustment
94

As a safety precaution, these operations must only be carried outwhen stationary.


Lumbar
91

Sitting comfortably
Door mirrors
Adjustment
A.
Selection of the mirror to be adjusted. B. Adjustment of the position of the mirror in
th
e four directions.
C. De-selection of the mirror.
95

Other functions available...

Folding/Unfolding. Automatic tilting of the mirror in reversegear for parking.
Blind spot sensors.



Rear view mirror


Manual day/night model
1.Selection of the "day" position of the mirror.
2. Adjustment of the mirror.


Automatic day/night model
97
A.
Brightness detection in automatic day/night
mode. B. Adjustment of the mirror.1.
Fastening the buckle.2.Height adjustment.


Front seat belts
181

Front seats Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to adapt your position for ease of driving and comfort.
Manual adjustments
Forwards-backwards adjustment
)Raise the control and slide the seatforwards or backwards.


Driver's or passenger's seat
height adjustment
) Pull the control upwards to raise or push
it downwards to lower, as many times as
necessary, to obtain the position required.

Seat back angle adjustment
)Turn the control knob to adjust the seat
backrest angle.




As a safety measure, seat adjustmentsshould only be done when stationary.

89Comfort











Front seats Seat consisting of a seat cushion, a seat back and a head restraint which can all be adjusted to
adapt your position for ease of driving and comfort.


Driver's seat electric adjustments


Forwards-backwards adjustment
)Push the control forwards or rearwards toslide the seat.
Seat cushion height and angle adjustment
)
Tilt the rear par t of the control upwards or
downwards to obtain the required height.) Tilt the front part of the control upwards or
downwards to obtain the required an
gle.

Seat back angle adjustment
)
Tilt the control forwards or rearwards to
adjust the angle of the seat back.

The electrical functions of the driver's seat are deactivated approximately one minute after the ignition is switched off.

To reactivate them, switch on the ignition.

Heated seats control
With the engine running, the front seats can be heated separately.)Use the adjustment dial, placed on the side
of each front seat, to switch on and select
the level of heating required: 0:


Off.1:Low.2:Medium. 3:
High.
Additional adjustments
Head restraint height and angle adjustment
)To raise a head restraint, pull it upwards.)To remove the head restraint, press thelug A
and pull the head restraint upwards.)To put the head restraint back in place, engage
the head restraint stems in the openings
keeping them in line with the seat back.)To lower the head restraint, press the lug A
and the head restraint at the same time.)To a djust the angle of the head restraint, tilt its lower part forwards or rearwards.
The head restraint is fitted with a framewith notches which prevents it fromlowering; this is a safety device in caseof impact. The adjustment is correct when theupper edge of the head restraint is level with the top of the head.Never drive with the head restraintsremoved; they must be in place andadjusted correctly.

stowed position (down).
They can also be removed.
To remove a head restraint:)release the backrest using control 1,)tilt the backrest 2 slightly forwards, )pull the head restraint upwards to the stop, )then, press the lug A
.
Rear head restraints

Never drive with the head restraints removed; they must be in place and correctly adjusted.









Steering wheel adjustment
)When stationary, pull the control lever toyrelease the adjustment mechanism.)
Adjust the height and reach to suit your
driving position.) Push the control lever to lock the
adjustment mechanism.
As a safety precaution, these operations should only be carried outwhile the vehicle is stationary.