2012 Citroen C5 ad blue

7
FAMILIARISATION



127

INTERIOR


Electric parking brake

The electric parking brake combines automatic application when the
engine is switched off, and automatic release when the vehicle is set in
motion (automatic function activated by default).
Manual application/release is possible.
Parking space sensor

The "Parking space sensor" sys-
tem assists you in fi nding a park-
ing space.
Dual-zone digital air conditioning

This air conditioning system provides inde-
pendent adjustment of the comfort levels for
the driver and front passenger.
Audio and communication systems

These systems benefi t from the latest techno-
logy: MP3 compatible audio system, Bluetooth
®
system, eMyWay.



52


225, 279



155

II
43
MULTIFUNCTION SCREENS
MONOCHROME SCREEN C
Main Menu

Press on the button A
to view the
Main Menu of the multifunction
screen. This menu gives you access
to the following functions:

Displays in the screen

Radio-CD

(see "Audio and Telematics"
section)


Bluetooth ®
system

(see "Audio and Telematics"
section)


Controls

Displays according to context:


- time

- date,

- ambient temperature with air
conditioning (the value displayed
fl ashes if there is a risk of ice),

- parking sensor information,

- audio functions

- alert messages,

- settings menus for the screen
and vehicle systems.
It is recommended that the driver
should not operate the controls
while the vehicle is in motion.


Personalisation -
Configuration
This permits activation / deactivation of the:



- brightness and contrast of the
multifunction screen,

- date and time,

- units of the ambient temperature
displayed.



A.
Access to the "Main Menu"

B.
Cancel the operation or return to
the previous display

C.
Scroll through the screen menus
Confi rmation at the steering wheel

D.
Confi rmation at the audio system
control panel

IX
158
DRIVING

Reactivation

In bad weather or in winter, ensure
that the sensors are not covered
with mud, ice or snow. When re-
verse gear is engaged, an audible
signal (long beep) indicates that the
sensors may be dirty.
When the speed of the vehicle is
below about 6 mph (10 km/h), some
sources of noise (motorcycle, lorry,
pneumatic drill, ...) may trigger the
audible parking sensor signals.


)
Press button A
again, the warning
lamp switches off, the system is
reactivated.
REVERSING CAMERA (TOURER)


A reversing camera is activated au-
tomatically when reverse gear is en-
gaged.
The colour image is provided in the
navigation screen.

The space between the blue lines
represents the width of your vehicle
except for the door mirrors.
The blue lines represent the general
direction of the vehicle.
The red lines represent a distance
of about 30 cm beyond the edge
of your vehicle's rear bumper. The
audible signal becomes continuous
from this limit.
The green lines represent distances
of about 1 and 2 metres beyond the
edge of your vehicle's rear bumper.

Clean the reversing camera regu-
larly using a sponge and a soft
cloth.

XI
193
PRACTICAL INFORMATION
FUSEBOX C



Fuse N°



Rating



Function




F1



15 A

Rear screen wipe (Tourer)


F2



30 A

Locking and deadlocking relay


F3



5 A

Airbags


F4



10 A

Automatic gearbox - additional heater unit (Diesel) - electrochrome rear view mirror


F5



30 A

Front window - sunroof - passenger door lighting - passenger door mirror adjustment


F6



30 A

Rear window


F7



5 A

Vanity mirror lighting - Glove box lighting - interior lamps - torch (tourer)


F8



20 A

Radio - CD changer - Steering mounted controls - Screen - Under-infl ation detection -
Electric boot ECU


F9



30 A

Cigar lighter - front 12 V socket


F10



15 A

Alarm - Steering mounted controls, signalling and wiper controls


F11



15 A

Low current ignition switch


F12



15 A

Driver’s electric seat - instrument panel - seat belt not fastened warning lamps - air
conditioning controls


F13



5 A

Engine relay unit - Hydraulic suspension pump cut-off relay - airbag ECU supply


F14



15 A

Rain and sunshine sensor - parking sensors - passenger’s electric seat - trailer relay unit -
HIFI amplifi er ECU - Bluetooth system - Lane Departure Warning System


F15



30 A

Locking and deadlocking relay


F17



40 A

Heated rear screen - heated door mirrors


FSH



SHUNT

PARK SHUNT

225

The system is protected in such a way that it will onlyoperate in your vehicle.
eMyWay


01 First steps - Control panel


For safety reasons, the driver must carry out operations
which require prolonged attention while the vehicle is stationary.
When the en
gine is switched off and to prevent
discharging of the battery, the system switches off following the activation of the energy economy mode.



CONTENTS

02 Steerin
g mounted controls

03 General o
peration

04 Navi
gation - Guidance

05 Traffic information

06 Usin
g the telephone

07 Radio

08 Music media pla
yers

09 Audio settin
gs

10 Confi
guration

11 Screen menu ma
p

Frequentl
y asked questions
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
226
228
229
231
244
247
257
2
60
2
66
267
2
68
272
SATELLITE NAVIGATION SYSTEM
MULTIMEDIA BLUETOOTH
TELEPHONE AUDIO SYSTEM

246
05TRAFFIC INFORMATION
PRINCIPAL TMC SYMBOLS

Red and yellow triangle: traffi c information, for example:
Black and blue trian
gle: general information, for example:
RECEIVING TA MESSAGES


The TA (Traffi c Announcement) function gives priority to TA alert messages. To operate, this function needs good reception of a radio station transmitting this type of message. When a traffi c report
is transmitted, the current audio source (Radio, CD, USB, ...) isinterrupted automatically to play the TA message. Normal playbackof the audio source resumes at the end of the transmission of themessage.
Pr
ess RADIO
to display the "FM / AM
band
" menu.
Select " Guidance options " then confi rm.
Select " Activate / Deactivate TA" thenconfi rm.

The volume settin
g for TA messages can be adjusted only during the
transmission of this type of alert.

Activate or deactivate the function at any time by pressing the button.
Durin
g a message, press the button to interrupt it.

248
06
PAIRING A BLUETOOTH TELEPHONE
FIRST CONNECTION For reasons of safety and because they require prolonged attention
on the part of the driver, the operations for pairing the Bluetoothmobile telephone to the hands-free system of the audio unit must be carried out with the vehicle stationary.
Activate the telephone's Bluetoothfunction and ensure that it is "shown to all" (telephone confi guration).
Pr
ess this button.
Select the name of the desired
peripheral from the list of devices detected then select "Connect
" and confi rm.
The s
ystem offers to connect the
telephone:
-
in"Hands-free mode" (telephoneonly),
-
in "Audio" mode (streaming: playingmusic fi les on the telephone),
-
or "All
" (for selection of both
modes).
Select " OK
" and confi rm.
Select " Bluetooth functions " and confi rm.
Select "Peripherals search" andconfi rm.
The list of peripherals detected is
displayed. Wait until the " Connect"button is available.
USING THE TELEPHONE

Visit www.citroen.co.uk for more information (compatibility,
additional help, ...).

249
06
Enter the same code on the telephone then accept
the connection.
Then accept automatic connection on the telephone to allow the
te
lephone to reconnect automatically every time the vehicle is started.

The abilit
y of the system to connect in only one mode depends on
the telephone. The two modes may both connect by default.
USING THE TELEPHONE

The "Hands-free mode
" should be used in preference if "Streaming" is not desired.
The services available depend on the network, the
SIM card and the compatibility of the Bluetooth telephone used. Check the telephone manual and with your network provider for details of the services available to you.
Select a code for the connection thenconfi rm "OK".


Depending on the type of telephone, the system will ask you to
accept or not the transfer of your contacts.

On return to the vehicle, the last telephone connected
automatically reconnects, within around 30 seconds after switching on the ignition (Bluetooth activated and visible).
To modi
fy the automatic connection mode, remove the pairingand pair the telephone again with the desired mode.