Page 127 of 284
9
Driving
125
Parking brake
Applying
)Pull the parking brake lever fully up toimmobilise your vehicle.
When the vehicle is being driven, if this warning lampand the STOPwarning lamp come on, accompanied by an audible signal and a message on the
multifunction screen, this indicates that the parkingbrake is still on or has not been properly released.
Releasing
)Pull the parking brake lever gently, press
the release button then lower the lever fully.
6-speed manual
gearbox
Engaging 5th or 6th gear
) Move the lever fully to the right to engage 5th or 6th gear.
Engaging reverse gear
)
Raise the ring under the knob and move
the gear lever to the left then for wards.
When parking on a slope, direct your wheels against the pavement, apply the parking brake and engage a gear.
Only engage reverse gear when thevehicle is stationary with the engine at idle.
As a safety precaution and to facilitate starting of the engine:
- always select neutral,
- press the clutch pedal.
Page 139 of 284
9
Driving
137
System which automatically maintains thespeed of the vehicle at the value programmed
by the driver, without any action on the
accelerator pedal.
The controls of this s
ystem are grouped
together on control stalk A. The programmed information is grouped
together in the instrument panel screen.
Steering mounted controls Displays in the instrument panel
The cruise control is switched on
manually: it
requires a minimum vehicle speed of 25 mph
(40 km/h) and the engaging of at least 4th gear.
Th
e cruise control is switched off
manually for by pressing the brake or clutch pedal or
on triggering of the ESP system for safety
reasons.
It is possible to exceed the programmed speed
temporaril
y by pressing the accelerator pedal.
To return to the programmed speed, simply
release the accelerator pedal.
Switchin
g off the ignition cancels any programmed speed value. 1
.Cruise control mode selection dial
2. Speed programming / value decreasebutton 3.
Speed programming / value increasebutton 4.
Cruise control off / resume button5
. Cruise control off / resume indication
6. Cruise control mode selection indication
7. Programmed speed value
The cruise control cannot, in any circumstances, replace the need to respect speed limits, nor can it replace the need for vigilance and responsibility on the par t of the driver.
Cruise control
Page 175 of 284
11
Practical information
173
Dashboard fuses
The fusebox is located in the glove box.
Access to the fuses
)
refer to the paragraph "Access to the tools".
Fuse tables
Fuse N°RatingFunctions
FH36 5
A Tr a i l e r r e l ay unit.
FH3
715 A Trailer accessories socket supply.
FH3
820 A Navigation.
FH39
- Not used.
FH4
030 A Tr a i l e r r e l ay unit.
Fuse N°RatingFunctions
F115 A Rear wiper.
F2
- Not used.
F3
5 A Airbags and pretensioners control unit.
F410 A Steering wheel angle sensor, air conditioning, clutch switch,
par ticle filter pump, diagnostic socket, air flow meter.
F530 A Electric windows panel, passenger's electric window control,
front electric windows motor.
F
630 A Rear electric windows motor and driver's electric window motor.
F7
5 A Courtesy and front map reading lamps, torch, rear reading lamps.
