2011 TOYOTA AYGO engine

OCCUPANT RESTRAINT SYSTEMS61
MS13089
This indicator comes on when the en-
gine switch is turned to the “ON” posi-
tion. It goes off after about 6 seconds.
This means the SRS front airbags are
operating properly.
This warning light system monitors the
airbag sensor assembly, side airbag
sensors, side and curtain shield airbag
sensors, airbag manual on−off switch, seat
belt pretensioner assemblies, inflators,
warning light, interconnecting wiring and
power sources. (For details, see “Service
reminder indicators and warning buzzers”
on page 127 in Section 1−6.)
If any of the following conditions occurs,
this indicates a malfunction of the airbags
or seat belt pretensioners. Contact any
authorized Toyota dealer or repairer, or
another duly qualified and equipped pro-
fessional, as soon as possible.
The airbag manual on−offswitchisinthe
“ON” position:
DWhen the engine switch is turned to
the “ON” position, the light comes on
for more than 6 seconds and then
flashes.
DWhen the engine switch is turned to
the “ON” position, the light either re-
mains off or flashes.
DWhile driving the vehicle, the light
flashes.The airbag manual on−offswitchisinthe
“OFF” position:
DWhen the engine switch is turned to
the “ON” position, the light comes on
for more than 6 seconds and then goes
off or flashes.
DWhen the engine switch is turned to
the “ON” position, the light remains off
or flashes without illuminating for more
than 6 seconds.
DWhile driving the vehicle, the light goes
off or flashes.
AYGO WE 99E37E11 02.18

OCCUPANT RESTRAINT SYSTEMS67
MS13089
This indicator comes on when the en-
gine switch is turned to the “ON” posi-
tion. It goes off after about 6 seconds.
This means the SRS side airbags are
operating properly.
This warning light system monitors the
airbag sensor assembly, side airbag
sensors, side and curtain shield airbag
sensors, airbag manual on−off switch, seat
belt pretensioner assemblies, inflators,
warning light, interconnecting wiring and
power sources. (For details, see “Service
reminder indicators and warning buzzers”
on page 127 in Section 1−6.)
If any of the following conditions occurs,
this indicates a malfunction of the airbags
or seat belt pretensioners. Contact any
authorized Toyota dealer or repairer, or
another duly qualified and equipped pro-
fessional, as soon as possible.
The airbag manual on−offswitchisinthe
“ON” position:
DWhen the engine switch is turned to
the “ON” position, the light comes on
for more than 6 seconds and then
flashes.
DWhen the engine switch is turned to
the “ON” position, the light either re-
mains off or flashes.
DWhile driving the vehicle, the light
flashes.The airbag manual on−offswitchisinthe
“OFF” position:
DWhen the engine switch is turned to
the “ON” position, the light comes on
for more than 6 seconds and then goes
off or flashes.
DWhen the engine switch is turned to
the “ON” position, the light remains off
or flashes without illuminating for more
than 6 seconds.
DWhile driving the vehicle, the light goes
off or flashes.
AYGO WE 99E37E11 02.18

76OCCUPANT RESTRAINT SYSTEMS
MS13089
This indicator comes on when the en-
gine switch is turned to the “ON” posi-
tion. It goes off after about 6 seconds.
This means the SRS side airbags and
curtain shield airbags are operating
properly.
This warning light system monitors the
airbag sensor assembly, side airbag
sensors, side and curtain shield airbag
sensors, airbag manual on−off switch, seat
belt pretensioner assemblies, inflators,
warning light, interconnecting wiring and
power sources. (For details, see “Service
reminder indicators and warning buzzers”
on page 127 in Section 1−6.)
If any of the following conditions occurs,
this indicates a malfunction of the airbags
or seat belt pretensioners. Contact any
authorized Toyota dealer or repairer, or
another duly qualified and equipped pro-
fessional, as soon as possible.
The airbag manual on−offswitchisinthe
“ON” position:
DWhen the engine switch is turned to
the “ON” position, the light comes on
for more than 6 seconds and then
flashes.
DWhen the engine switch is turned to
the “ON” position, the light either re-
mains off or flashes.
DWhile driving the vehicle, the light
flashes.The airbag manual on−offswitchisinthe
“OFF” position:
DWhen the engine switch is turned to
the “ON” position, the light comes on
for more than 6 seconds and then goes
off or flashes.
DWhen the engine switch is turned to
the “ON” position, the light remains off
or flashes without illuminating for more
than 6 seconds.
DWhile driving the vehicle, the light goes
off or flashes.
AYGO WE 99E37E11 02.18

78OCCUPANT RESTRAINT SYSTEMS
MS13026
The airbag manual on−off system con-
sists of an airbag manual on−off switch
and SRS warning light. The switch can
disable the front airbag on the front
passenger side only. The SRS warning
light comes on when the airbag is dis-
abled. Disable the airbag only when
installing a rear−facing child restraint
system on the front passenger seat is
unavoidable.
The airbag manual on−off switch is lo-
cated on the driver side instrument panel
and the SRS warning light is located on
the instrument cluster panel.
Before operating the airbag manual on−off
switch, stop the vehicle and turn the en-
gine off. Insert the key into the key cylin-
der and turn it. To disable the airbag, turn
the key to the “OFF” position. The SRS
warning light will come on to tell you that
the airbag is off when the engine is turned
on. (For details about the indicator light,
see the following descriptions.) Be sure to
remove the key from the key cylinder.
Vehicles with side and curtain shield air-
bags—Thissystem cannot turn off the
side airbags and curtain shield airbags.
MS13043
SRS warning light
This light comes on when the engine
switch is turned to the “ON” position. It
goes off after about 6 seconds or remains
on when the airbag manual on−off switch
is in the “OFF” position. This means the
airbag manual on−off system isoperating
properly.
Contact any authorized Toyota dealer or
repairer, or another duly qualified and
equipped professional if any of the follow-
ing occur.
DThe key cylinder cannot be turned.
The airbag manual on−offswitchisinthe
“ON” position:
DWhen the engine switch is turned to
the “ON” position, the light comes on
for more than 6 seconds and then
flashes.
DWhen the engine switch is turned to
the “ON” position, the light either re-
mains off or flashes.
DWhile driving the vehicle, the light
flashes.
The airbag manual on−offswitchisinthe
“OFF” position:
DWhen the engine switch is turned to
the “ON” position, the light comes on
for more than 6 seconds and then goes
off or flashes.
AYGO WE 99E37E11 02.18
Airbag manual on−off system
(for front passenger)

OCCUPANT RESTRAINT SYSTEMS79
DWhen the engine switch is turned to
the “ON” position, the light remains off
or flashes without illuminating for more
than 6 seconds.
DWhile driving the vehicle, the light goes
off or flashes.
CAUTION
DYou must turn off the front airbag
on the front passenger side when it
is unavoidable to install the rear−
facing child restraint system on the
front passenger seat.
DNever install a rear−facing child re-
straint system on the front passen-
ger seat with the airbag turned on.
Otherwise, the force of the rapid
inflation of the airbag could cause
death or serious injury to the child.
DUnless the rear−facing child re-
straint system is installed on the
front passenger seat, the airbag
should be turned on to avoid death
or serious injuries to the front pas-
senger. Make sure that the SRS
warning light is off.
DTurning off the airbag can reduce
the performance of the SRS system
in certain accidents and increase
the likelihood of death or serious
injuries to the front passenger.
For details, see “SRS driver airbag
and front passenger airbag” on page
55 in this Section.
AYGO WE 99E37E11 02.18

11 6LIGHTS, WIPERS AND DEFOGGER
Headlights and turn signals
MS14001b
HEADLIGHTS
To turn on the following lights: Twist
the headlight/turn signal lever knob.
Position 1—Position, tail, license plate and
instrument panel lights
Position 2—Headlights and all of the
above
However, on some models, all the lights
above also turn on when the engine is
started with the headlight switch off.
The headlight low beam indicator light
(green light) on the instrument cluster will
tell you that the low beams are on.
Adjust the headlight beam level before
turning on the headlights. (See “Headlight
beam level control” on page 117.)
Light reminder buzzer
A buzzer will remind you to turn the lights
off when the driver ’s door is opened if the
engine switch is turned to the “LOCK”
position with the headlights switch on.
NOTICE
To prevent the battery from being dis-
charged, do not leave the lights on
for a long period when the engine is
not running.
MS14002b
High−Low beams—For high beams, turn
the headlights on and push the lever away
from you (position 1). Pull the lever to-
ward you (position 2) for low beams.
The headlight low beam indicator light
(green light) on the instrument cluster will
tell you that the low beams are on.
The headlight high beam indicator light
(blue light) on the instrument cluster will
tell you that the high beams are on.
Flashing the high beam headlights
(position 3)—Pull the lever all the way
back. The high beam headlights turn off
when you release the lever.
You can flash the high beam headlights
with the knob turned to “OFF”.
AYGO WE 99E37E11 02.18

LIGHTS, WIPERS AND DEFOGGER11 7
MS14003b
TURN SIGNALS
To signal a turn, push the headlight/
turn signal lever up or down to position
1.
The engine switch must be in the “ON”
position.
The lever automatically returns after you
make a turn, but you may have to return
it by hand after you change lanes.
To signal a lane change, move the lever
up or down to the pressure point (position
2) and hold it.
If the turn signal indicator lights (green
lights) on the instrument cluster flash fast-
er than normal, a front or rear turn signal
bulb has burned out.
Headlight beam level control
MS14004a
To adjust the headlight beam level, turn
the switch.
The following list shows examples of prop-
er switch settings. For loading conditions
other than those listed, adjust the dial
position so that the beam level is the
same as the one obtained according to
the list when only the driver is in the
vehicle. The higher the number of the dial
position, the lower the headlight beam lev-
el.
CAUTION
Always keep the headlight beam at
the proper level, or your headlights
may dazzle other road users, causing
unexpected accidents.
AYGO WE 99E37E11 02.18

120LIGHTS, WIPERS AND DEFOGGER
Windshield wiper and washer
MS14008a
To turn on the windshield wiper, move
the lever to the desired setting.
The engine switch must be in the “ON”
position.
Lever position
Speed setting
Position 1Intermittent
Position 2Slow
Position 3Fast
For a single sweep of the windshield,
push the lever up and release it.
To squirt washer fluid, pull the lever
toward you.
For instructions on adding washer fluid,
see “Adding washer fluid” on page 282 in
Section 7−3.
In freezing weather, warm the windshield
with the defroster before using the washer.
This will help prevent the washer fluid
from freezing on your windshield, which
could block your vision.
NOTICE
Do not operate the wiper if the wind-
shield is dry. It may scratch the
glass.
MS14009a
To turn on the rear window wiper, twist
the lever knob upward. (Position 1)
The engine switch must be in the “ON”
position.
To squirt washer fluid on the rear window,
twist the knob upward or downward as far
as it will go (position 2 or 3). The knob
automatically returns from these positions
after you release it.
For instructions on adding washer fluid,
see “Adding washer fluid” on page 282 in
Section 7−3.
NOTICE
Do not operate the rear wiper if the
rear window is dry. It may scratch the
glass.
AYGO WE 99E37E11 02.18
Rear window wiper and
washer