2011 PEUGEOT 207 CC Owners Manual

2
i
!
COMFORT
55
MIRRORS

Door mirrors

Adjustable mirror permitting the lateral
rearward vision necessary when over-
taking or parking.
Adjustment


)
Slide switch A
to the right or to the left
to select the corresponding mirror.

)
Move knob B
in all four directions to
adjust.

)
Return switch A
to the centre position.

The folding and unfolding of the
door mirrors can be deactivated by
a PEUGEOT dealer or a qualifi ed
workshop.
Folding


)
From outside: lock the vehicle using
the remote control or the key.

)
From inside: with the ignition on, pull
switch A
rearwards.


Unfolding


)
From outside: unlock the vehicle us-
ing the remote control or the key.

)
From inside: with the ignition on, pull
switch A
rearwards. The objects observed are, in reality,
closer than they appear.
Take this into account to correctly
judge the distance of vehicles ap-
proaching from behind.

2
!
i
COMFORT
56





Rear view mirror

Adjustable mirror providing a central
rearward view.
Equipped with an anti-dazzle system,
which darkens the mirror glass: this re-
duces the nuisance to the driver caused
by the headlamps from following vehi-
cles, low sun...

Adjustment


)
Adjust the mirror so that the glass is
directed correctly in the "day" position.


As a safety measure, the mirrors
should be adjusted to reduce the
"blind spot".

In order to ensure optimum vis-
ibility during your manoeuvres, the
mirror lightens automatically when
reverse gear is engaged.







Automatic day/night model


Manual day/night model

Day/night position


)
Pull the lever to change to the "night"
anti-dazzle position.

)
Push the lever to change to the normal
"day" position.

By means of a sensor, which measures
the light from the rear of the vehicle, this
system automatically and progressively
changes between the day and night
uses.

2
!
COMFORT
SUN VISOR
Component which protects against sunlight
from the front or the side, also equipped
with an illuminated courtesy mirror.


)
With the ignition on, raise the conceal-
ing fl ap; the mirror is lit automatically.
This sun visor is also equipped with a
ticket holder.
To avoid any risk of jamming of the
pedals:


- only use mats which are suited
to the fi xings already present in
the vehicle; these fi xings must
be used,

- never fi t one mat on top of an-
other.
The use of mats not approved by
PEUGEOT may interfere with ac-
cess to the pedals and hinder the
operation of the cruise control/
speed limiter.

MATS

Removable carpet protection.


Refitting

To refi t the mat on the driver's side:


)
position the mat correctly,

)
refi t the fi xings by pressing,

)
check that the mat is secured cor-
rectly.


Fitting

When fi tting the mat for the fi rst time,
on the driver's side use only the fi xings
provided in the wallet attached.
The other mats are simply placed on
the carpet.


Removal

To remove the mat on the driver's side:


)

move the seat as far back as possible,


)
unclip the fi xings,

)
remove the mat.

2COMFORT
58
INTERIOR FITTINGS


1.
Illuminated glove box

(see details on following page)

2.
Storage compartment with
non-slip mat


3.
Storage compartment


4.
Door tray


5.
Card/ticket holder


6.
Storage compartment with
non-slip mat


7.
USB port

(see details on following page)

8.
12 V accessories socket

(see details on following page)

9.
Cup holder

2COMFORT
59












Illuminated glove box

This has an upper open storage com-
partment and locations for storing a
small bottle of water, the vehicle’s hand-
book, ...
Its lid has locations for a pen, tokens,
cards, cans, ...






12 V accessory socket



)
To connect a 12 V accessory (max
power: 120 Watts), lift the cover and
connect a suitable adaptor.

The "AUX"
connection box, located in
the centre console, comprises an auxil-
iary JACK socket and/or a USB port.
It permits the connection of a portable
device, such as a digital audio player of
the iPod
® or USB memory stick type.
It reads certain audio fi le formats allow-
ing them to be heard via the vehicle's
speakers.
You can manage these fi les using the
steering mounted controls or the audio
system control panel and display them
in the multifunction screen.

Connected to the USB port, the port-
able device charges automatically while
in use.

For more information on the use of
this equipment, refer to the "Audio and
Telematics" section. It is fi tted with a lock.


)
To open the glove box, raise the
handle.
It is illuminated when the lid is opened.
It houses the front passenger airbag de-
activation switch A
.
If the vehicle is fi tted with air condi-
tioning, it provides access to the ven-
tilation nozzle B
, which can be opened
or closed, distributing the same condi-
tioned air as the vents in the passenger
compartment.
It also provides access to the dashboard
fusebox (refer to "Changing a fuse").

2COMFORT
60
BOOT FITTINGS


1.
Load space cover



net


(see details on following page)

2.
Windstop storage case


(see details on following page)

3.
Luggage retaining strap

2
i
!i
COMFORT
61
In the "cabriolet" confi guration, this de-
fi nes the luggage space in the boot.







Load space cover net

When it has been removed and folded,
the windstop should be stored in its pro-
tective case.
This case can be stored by means of a
strap on the right-hand side of the boot.









Windstop storage case

When the load space cover net is in place,
the following conditions must be observed:


- the luggage must not raise the cover net,

-
luggage must not be placed on top of
the cover net.

The load space cover net must
always be in place before a roof
opening operation is started (refer
to the "Familiarisation - § Opening"
section). For installation of the windstop, re-
fer to the following pages "Fitting/
removing the windstop".

2COMFORT
62

Windstop folded FITTING/REMOVING
THE WINDSTOP
In the "cabriolet" confi guration, the
windstop improves comfort in the pas-
senger compartment.
The vertical part of the windstop can be
folded down to improve visibility when
reversing.
It is supplied folded in four in its protec-
tive case.

Windstop unfolded
Fitting


)
Clip the ends of the assembly until a
click is heard.

)
Unfold the windstop by opening the
two parts to 90° until a click is heard.

)
Unfold the windstop frame guides.

)
Engage the guides in the points lo-
cated behind the rear seat belts.

)
Unfold each of the two parts fully.