2011 NISSAN GT-R ad blue

Black plate (1,1)
Table of
Contents
Model "R35-N" Edited: 2009/ 10/ 30
IntroductionAbout Multi function display systemNavigationAudio systemBluetooth®
Hands-Free Phone SystemHeater and air conditionerViewing technical informationOther settingsVoice recognitionMulti function meterGeneral system information
012345678910
Index
11
Troubleshooting guide
12

Black plate (7,1)
Model "R35-N" EDITED: 2009/ 10/ 30
This system is certified as a Class 1 laser
product.
The system complies with DHHS Rules 21 CFR
Chapter 1, Subchapter J.
WARNING
.Do not disassemble or modify this
system. There are no user service-
able parts in this system.
. If maintenance, adjustments and
operations other than those speci-
fied in this manual are attempted,
injury due to laser radiation and
exposure could occur.
Required XM
®
Radio and XM NavTraffic
®
monthly subscriptions are sold separately after
a trial period. XM NavTraffic
®is only available in
select markets. For more information,
see www.xmradio.com/navtraffic.
Required XM
®Radio and XM NavWeather
TM
monthly subscriptions are sold separately after a
trial period. XM NavWeather
TM
is only available
in select markets. For more information, see
www.xmradio.com/navweather.
BLUETOOTH
®
is a trademark
owned by Bluetooth SIG, Inc.,
U.S.A.
Introduction
0-5
LASER PRODUCT TRADEMARKS

Black plate (10,1)
Model "R35-N" EDITED: 2009/ 10/ 30
NAVIGATION SYSTEMContained within NISSAN’s authentic navigation
system, the navigation and audio systems are all
available for use.
Navigation screenAudio screen
Information screen
Available items:
.Navigation function
“Navigation” page 2-1
. Audio“Audio system” page 3-1
. Bluetooth
®Hands-Free Phone
“Bluetooth
®Hands-Free Phone Sys-
tem” page 4-1
. Heater/air conditioner
“Heater and air conditioner” page 5-1
. Vehicle information/Traffic information“Viewing technical information” page
6-1
. System setting“Other settings” page 7-1
. Voice recognition“Voice recognition” page 8-1
MULTI FUNCTION METER
WARNING
.Use the information from the multi
function meter strictly as a refer-
ence to make your driving more
comfortable. The readings are not
meant to prevent accidents caused
by reckless driving or poor driving
conditions (due to weather, road
condition, etc.) . Always obey all
traffic regulations and posted speed
limits.
. Operating the multi function meter
while driving can lead to a crash
resulting in serious injuries or
death. Always park the vehicle in a
safe place before operating the dis-
play screen.
. Look at the display screen only
briefly while driving. Keep your eyes
on the road. Inattentive driving may
lead to a crash resulting in serious
injuries or death.
1-2
About Multi function display system
FEATURES OF MULTI FUNCTION
DISPLAY SYSTEM

Black plate (15,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Audio system&1
/ :
Turn this switch to manually tune the radio
frequency. Push the switch to configure the
sound settings. When using Music Box/CD
(including MP3/WMA/AAC files on disk)/
DVD/USB memory/Bluetooth streaming
audio (if so equipped)/iPod player you can
change the album or folder to be played.
&2
Preset stations <1>-<6> :
Use these buttons to toggle between the
stations preset in the system. Pushing and holding any of the preset station buttons
will save the station you are listening to.
&3

/ :
Turn this switch to adjust the volume of the
stereo. Push this switch to turn the audio
system ON or OFF.
&4
:
Push to switch between Music Box/CD/
DVD/USB memory/Bluetooth streaming
audio (if so equipped)/iPod player AUX (if
so equipped) screens.
&5
<
> :
Push to search for a track/station auto-
matically or to fast-forward when listening
to music.
&6
<
> :
Push to search for a track/station auto-
matically or to rewind when listening to
music.
&7
:
Push to switch to an XM
®satellite radio
band.
&8
:
Push to switch from the random mode to
repeat mode while listening to music.
&9
:
Push to tune the radio from low to high
frequencies. The radio will stop at each
broadcasting station for 5 seconds. When
operating the CD player, push to preview
the first 5 seconds of each CD track.
&10
:
Push to switch to a different radio band.About Multi function display system
1-7

Black plate (18,1)
Model "R35-N" EDITED: 2009/ 10/ 30
STEERING SWITCH&1
:
Push the source select switch to change
the mode in the sequence of Preset A,
Preset B, Preset C, iPod
®(if so equipped) ,
Music Box, CD, DVD, USB memory and
Bluetooth streaming audio (if so equipped)
and AUX (if so equipped) . If they are not
ready to function, those modes will be
skipped.
&2
:
Allows you to adjust the volume.
&3
:
This can be used when operating the audio
system. Push the seek button to select a
radio station or a song. Push and hold the
seek button and the system will automati-
cally select a station folder or disc.
&4
<
> :
Push to enter voice recognition mode.
&5
<
> :
Push to display the hands-free phone
operation screen.
&6
:
When using the stopwatch, push this
button to record the required travel time.
When Driver’s Notes is active, pushing this
will record your present position as a
waypoint.
&7
:
Push to start/stop the timer on the Stop-
watch screen or the Driver’s Notes screen
(when displayed) .
1-10
About Multi function display system

Black plate (31,1)
Model "R35-N" EDITED: 2009/ 11/ 6
Touch the icon to change the setting.: North always pointing up.: Direction of the vehicle always pointing
up.
“Setting map orientation” page 2-14
*6
Scale indicator:
Indicates the scale of the map. Touch the icon to display the scale bar.
The map scale can be adjusted using the
scale bar.“Operating with touch panel opera-
tion” page 2-7
*7
Arrow:
Indicates the distance to the next guide point and the turning direction at that guide
point.
*8
Stored location (orange):
Displays the locations that are stored in the Address Book. Icons can be changed
according to personal preferences.“STORING LOCATION” page 2-71
*9
Avoid Area (green or blue):
Displays the areas to avoid that are stored in the Address Book with green or blue icons.
During the route search, the route guidance
is performed by searching for a route that
avoids those areas.“STORING AVOID AREA” page 2-76
*10
Street name:
Displays the name of the street the vehicleis currently driving on.
*11
Traffic indicator:
Displays the reception condition of the traffic information transmitted from the
provider.
Green: Reception condition is good.
Gray: Reception condition is not good.
No mark: Subscription to XM NavTraffic
®
service is not detected.
BIRDVIEW
TM
(3D) MAP
Birdview
TM
displays the map from an elevated
perspective. In Birdview
TM, it is easy to recog-
nize an image of the route because it provides a
panoramic view over a long distance.
INFO:
Note the following items about the Birdview
TM
display. .
“Birdview
TM” is a registered trademark of
Clarion Co., Ltd.
. The map in Birdview
TM
always appears with
the current forward direction facing up.
BUILDING GRAPHICSIn an area where the building graphics are
stored in the map data, the building graphics are
displayed when the map is zoomed in. On the
2D map display, these are called “Building
footprint graphics”, and on the Birdview
TM
display, these are called “3D building graphics”.
The method to look at the map is the same for
the 2D and Birdview
TM
maps.
Building footprint graphics (2D map)
Navigation
2-5

Black plate (73,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Storing locationA searched location can be stored in the
Address Book. Then it can be easily retrieved
and set as a destination (or waypoint) .1. Highlight [Store Location] and push TER>.2. The location is stored in the Address Book. The corresponding icon is displayed at the
set location on the map.
Viewing information about searched
locationInformation (street address and phone number)
about places stored in the map data can be
displayed.1. Select [Place Info] and push .2. Information about the location is displayed.
3. Push to return to the previous
screen.
INFO:
. If [Call] is displayed on the right side of the
screen, it is possible to call the location
indicated.
. The Bluetooth
®Hands-Free Phone system
is required to be active and the cellular
phone connected to call the location in-
dicated.
. Information about locations is not displayed
while driving.
ABOUT ROUTE GUIDANCEAfter setting the route, select [Start] to begin
route guidance.
Throughout route guidance, the system navi-
gates you through the guide points using visual
and voice guidance.
CAUTION
.The navigation system’s visual and
voice guidance is for reference pur-
poses only. The contents of the
guidance may be inappropriate de-
pending on the situation.
. Follow all traffic regulations when
driving along the suggested route
(e.g., one-way traffic) .
“ROUTE GUIDANCE” page 10-7
Navigation
2-47

Black plate (113,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Move Location:Adjusts the location of the Avoid Area.1. Highlight [Move Location] and push TER>.
2. Adjust the location of the Avoid Area.
3. After adjusting the location, push TER>.
Resize Area:Adjusts the range of the Avoid Area.1. Highlight [Resize Area] and push TER>.
2. Highlight the range from 5 available levels.
3. After highlighting the range, push TER>.
FWY:Sets the route to avoid freeways.1. Highlight [FWY].
To include freeways in the Avoid Area, push
to illuminate this indicator.2. The Avoid Area is displayed in green if it
includes a freeway or in blue if it does not
include a freeway.
Navigation
2-87