2011 NISSAN GT-R navigation system

Black plate (73,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Storing locationA searched location can be stored in the
Address Book. Then it can be easily retrieved
and set as a destination (or waypoint) .1. Highlight [Store Location] and push TER>.2. The location is stored in the Address Book. The corresponding icon is displayed at the
set location on the map.
Viewing information about searched
locationInformation (street address and phone number)
about places stored in the map data can be
displayed.1. Select [Place Info] and push .2. Information about the location is displayed.
3. Push to return to the previous
screen.
INFO:
. If [Call] is displayed on the right side of the
screen, it is possible to call the location
indicated.
. The Bluetooth
®Hands-Free Phone system
is required to be active and the cellular
phone connected to call the location in-
dicated.
. Information about locations is not displayed
while driving.
ABOUT ROUTE GUIDANCEAfter setting the route, select [Start] to begin
route guidance.
Throughout route guidance, the system navi-
gates you through the guide points using visual
and voice guidance.
CAUTION
.The navigation system’s visual and
voice guidance is for reference pur-
poses only. The contents of the
guidance may be inappropriate de-
pending on the situation.
. Follow all traffic regulations when
driving along the suggested route
(e.g., one-way traffic) .
“ROUTE GUIDANCE” page 10-7
Navigation
2-47

Black plate (75,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Guidance screens and preview
modeRoute guidance displays map screens and
various information according to the situation.When route guidance starts, the Small Turn
Arrow on Map is displayed in the upper left
corner of the map screen. This arrow indicates
the turning direction at the next guide point
(corner or intersection) . The distance is also
displayed. At the top of the screen, the distance
to the next guide point and the name of the next
street to turn on to are displayed. Also, there
may be cases that next street names are
announced. The Small Turn Arrow on Map can
be enabled or disabled by the user.
“Displaying small turn arrow on map” page
2-69
Enlarged intersection view:When approaching a guide point, the system
automatically changes to the split screen and
shows an enlarged view of the intersection on
the left screen. After passing through the
intersection, the system automatically returns
to the full screen mode. To switch to the full
screen mode while the enlarged intersection
view is displayed, push

Black plate (76,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Turn list:Depending on the setting, the system can
constantly display the split screen and show
the turn list on the left screen. When approach-
ing a guide point, the left screen automatically
switches to an enlarged view of the intersection.
To switch to the full screen mode, push

Black plate (80,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Available setting items
.[Cancel Route/Resume Route]:
Cancels the current route guidance. A
canceled route can also be reactivated. If
the suggested route is canceled, [Cancel
Route] changes to [Resume Route].
“Canceling/reactivating route” page 2-
54
. [Edit/Add to Route]:
Edit or add a destination or waypoints to the
route that is already set.“Editing route” page 2-55
. [Route Info]:
Confirm the route by the route information or
simulation. The confirmed route can also be
stored.“Confirming route” page 2-60
. [Guidance Settings]:
Activates or deactivates route, voice gui-
dance and/or traffic announcement and
adjust the volume level of voice guidance.“Guidance settings” page 2-61
. [Recalculate]:
Manually search for the route again after
changing the search condition and have the
system calculate a route.“Recalculate route” page 2-62 .
[Detour]:
A detour of a specified distance can be
calculated.
“Setting detour route” page 2-63
. [Traffic Detour]:
Manually search for an alternative detour
route taking the traffic information into
consideration.“Searching for detour route taking
traffic information into consideration” page
2-64
. [Route Settings]:
Changes the route calculation conditions
anywhere along the route.“Setting conditions for route calcula-
tion” page 2-65
Canceling/reactivating routeA route that is already set can be canceled at
any time. If a route is deleted, the destination
and waypoints are also canceled.
It is also possible to reactivate a canceled route.
INFO:
Canceling a route does not delete the destina-
tion and waypoint information completely. To
delete the destination and waypoints completely.“DELETE DESTINATION” page 2-42
Canceling route:1. Push .
2. Highlight [Cancel Route] and push TER>.3. A confirmation message is displayed.
Highlight [Yes] and push .
The route is canceled along with the
destination and waypoints.
2-54
Navigation

Black plate (82,1)
Model "R35-N" EDITED: 2009/ 10/ 30
“Editing/deleting destination or way-
point” page 2-57
*6
Condition for calculating a route to a waypoint:
Changes the conditions for calculating a
route to a waypoint.
“Changing route calculation condi-
tions” page 2-59
*7
[Calculate]: Manually search for the route again after
changing the search conditions and have
the system calculate a route.
“Changing route calculation condi-
tions” page 2-59
Setting destination or waypoint:A destination or waypoint can be added to the
route that has already been set. A total of 6
destinations or waypoints can be set.1. Push . 2. Highlight [Edit/Add to Route] and push
.
3. Highlight [Add Destination] or [Add Way- point] and push .
If [Add Destination] is selected, the current
destination changes to a waypoint.
4. Set a destination or waypoint. The method of searching for a destination or waypoint is the
same as the one for a destination.
“SETTING DESTINATION” page 2-23
5. The selected location is displayed at thecenter of the map. Highlight [Add to Route]
after confirming the location and push
.
INFO:
Even after setting a destination/waypoint,
the destination/waypoint location can be
adjusted, the route can be stored, etc.“Editing/deleting destination or way-
point” page 2-57
6. Return to the [Edit Route] screen. Set the
route conditions as necessary.
7. Highlight [Calculate] and push .
The system will recalculate the routes. After
the route search is completed, the display
will automatically return to the current
location map screen.
2-56
Navigation

Black plate (83,1)
Model "R35-N" EDITED: 2009/ 10/ 30
INFO:
. The prior route is automatically deleted.
. Added waypoints and search conditions will
not be taken into consideration for the route
calculation until [Calculate] is highlighted
and is pushed.
Editing/deleting destination or way-
point:The destination or waypoint that has already
been set can be modified or deleted.
If a location is modified or deleted when a
suggested route is already set, the prior
suggested route will be recalculated accord-
ingly.1. Push .
2. Highlight [Edit/Add to Route] and push .
3. Highlight a destination or waypoint that is already set and push
.
4. Highlight [Move Dest.] to modify the location
and push .
“Moving location of destination” page
2-46
5. Highlight [Delete] and push to
delete the location.
6. A confirmation message is displayed. Con- firm the contents of the message, highlight
[Yes] and push . The destination
or waypoint is deleted from the route. Return
to the [Edit Route] screen.7. By highlighting [Calculate] and pushing , the system will recalculate the
routes. After the route search is completed,
the display will automatically return to the
current location map screen.
Navigation
2-57

Black plate (84,1)
Model "R35-N" EDITED: 2009/ 10/ 30
INFO:
. If the destination is deleted, the final
waypoint of the route becomes the destina-
tion.
. Even if the map screen is touched, the same
map screen as when [Move Dest.] is
selected is displayed.
Changing order of destination and way-
points:The order of a destination and waypoints that
have already been set can be changed.1. Push .
2. Highlight [Edit/Add to Route] and push .
3. Highlight a destination or waypoint that is already set and push .
4. Highlight [Change Order] and push TER>. A list of the destination and way-
points is displayed.5. Highlight a preferred destination or waypoint
to replace the previously selected destina-
tion or waypoint and push .
6. A message is displayed and the order of the
destination or waypoint is changed.7. By highlighting [Calculate] and pushing , the system will recalculate the
routes. After the route search is complete,
the display will automatically return to the
current location map screen.
2-58
Navigation

Black plate (85,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Changing route calculation conditions:Each section of the route between waypoints
can have different route calculation conditions.
After setting these conditions, the entire route
can be recalculated.1. Push .
2. Highlight [Edit/Add to Route] and push .
3. Highlight the preferred section of the route to the destination or waypoint and push
.
4. Highlight the preferred condition and push
.
Available conditions
: [Fastest Route]: [Minimize Freeway]: [Shortest Route]
5. The conditions have been changed and the display returns to the [Edit Route] screen.6. By highlighting [Calculate] and pushing
, the system will recalculate the
routes. After the route search is completed,
the display will automatically return to the
current location map screen.
INFO:
. The recalculated route may not be the
shortest route because the system priori-
tizes roads that are easy to drive for safety
reasons.
. If the route conditions are set from [Route
Settings], all sections in the route are
subject to the same route conditions. This
applies even if different route conditions
have been set for different sections in [Edit
Route].
Navigation
2-59